• Journal of Soil and Groundwater Environment
• /
• v.23 no.1
• /
• pp.54-62
• /
• 2018

This paper is aimed at source tracking of soil heavy metal contamination at a site established by reusing construction wastes. The soil heavy metal concentration at the study site peaked at a depth range of 5-10 m. Column studies were conducted to investigate the possibility of the contamination scenario of infiltration of stormwater carrying heavy metals of ground origin followed by selective heavy metal accumulation at the 5-10 m depth range. Almost all amount of lead, zinc, cadmium, and nickel introduced to the columns each packed with 0-5 m or 5-10 m field soil were accumulated in the column. The very poor heavy metal mobility in spite of the weak association of the heavy metals with the soil (characterized by a sequential extraction procedure) can be attributed to the high pH (10-11) of the construction wastes. From the results, the heavy metal contamination of the subsurface soil by an external heavy metal source was determined to be very unlikely at the study site. The column study applied in the current study is expected to be a useful methodology to present direct evidence of the contaminant source tracking at soil contamination sites.

• Membrane and Water Treatment
• /
• v.9 no.3
• /
• pp.137-146
• /
• 2018

Soil washing is one of the most frequently used remediation technologies for heavy metal-contaminated soils. Inorganic and organic acids and chelating agents that can enhance the removal of heavy metals from contaminated soils have been employed as soil washing agents. However, the toxicity, low removal efficiency and high cost of these chemicals limit their use. Given that humic substance (HS) can effectively chelate heavy metals, the development of an eco-friendly, performance-efficient and cost-effective soil washing agent using a nano-scale chelator composed of HS was examined in this study. Copper (Cu) and lead (Pb) were selected as target heavy metals. In soil washing experiments, HS concentration, pH, soil:washing solution ratio and extraction time were evaluated with regard to washing efficiency and the chelation effect. The highest removal rates by soil washing (69% for Cu and 56% for Pb) were achieved at an HS concentration of 1,000 mg/L and soil:washing solution ratio of 1:25. Washing with HS was found to be effective when the pH value was higher than 8, which can be attributed to the increased chelation effect between HS and heavy metals at the high pH range. In contrast, the washing efficiency decreased markedly in the low pH range due to HS precipitation. The chelation capacities for Cu and Pb in the aqueous phase were determined to be 0.547mmol-Cu/g-HS and 0.192mmol-Pb/g-HS, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.5
• /
• pp.514-518
• /
• 1997

This study was designed to record the ovarian response towards a combined administration of heterologous buffalo FSH (buFSH) and LH (buLH) in goats. The impact of such a treatment on ovarian structures and on the plasma profile of the ovarian sex steroids (estradiol $17-{\beta}$ and progesterone) was studied. The buFSH and buLH were isolated from the buffalo pituitaries involving a procedure of ethanolic extraction, acetone precipitation followed by metaphosphoric acid - ammonium sulphate fractionation. Both gonadotrophin samples prepared were found biologically active and potent. There was an increase in the total number of follicles in the treated group ($12.66{\pm}1.24$) vis-a-vis the control group ($8.50{\pm}2.06$). However, the percentage ($51.48{\pm}6.37$) of large follicles were found reduced ($23.74{\pm}5.93$) following the treatment. Again the number of corpora lutea were observed significantly higher ($2.33{\pm}0.47C.L.$) in the treated group than (1 C. L.) in the control group. The peak plasma estradiol- $17{\beta}$ levels achieved, were much higher ($17.16{\pm}9.52pg/ml$) in the treated group, than the peak ($7.22{\pm}1.67pg/ml$) achieved in the control group. Similar trend was observed with respect to the progesterone levels (higher in the treated group). This study thus indicated that, a combined administration of heterologous buffalo FSH and LH to goats speeded up development of larger follicles nearing the ovulation stage. This population of the follicles subsequently got reduced and lead to the formation of the increased number of the corpora lutea observed in this study.

• ALGAE
• /
• v.35 no.2
• /
• pp.107-121
• /
• 2020

Mariculture is regarded as the only option to supply the increasing demands for seaweeds as human food, feeds, fodder, and phycolloids in a sustainable manner. Technologies for culturing a range of seaweed species have been developed successively in Korea since the 1970s. In 2017, Korean marine farms produced 1,761,526 t of seaweed. The key focus of the industry is on the production of Pyropia (523,648 t), Undaria (622,613 t), and Saccharina (542,285 t). Pyropia is economically the most important species in Korea, accounting for up to 68% of total production value. As the top exporter of Pyropia in the world, Korea exported up to US $525 million of Pyropia products to 110 countries in 2018. Other economically important genera include Sargassum, Ulva, Capsosiphon, Codium, and Gracilariopsis, all of which are used for food, and Gelidium, Pachymeniopsis, and Ecklonia which are used as raw material for phycocolloid extraction. Significant work has gone into developing more productive strains of key seaweed species, and in 2012 the Korean government began to certify seaweed varieties. To date, 19 seaweed cultivars have been registered including 13 Pyropia, 5 Undaria, and 1 Saccharina. The industry is now seeking not only to increase productivity but also to add value through processing. Convenience foods and snacks have been developed that target health-conscious consumers and utilize the nutritional properties of seaweeds. The industry is also seeking to promote the sustainability of seaweed farming. One seaweed company in Korea obtained the world's first ASC-MSC (Aquaculture Stewardship Council-Marine Stewardship Council) certification in 2019 and more are expected to follow their lead. With continued research support, the Korean seaweed industry plans to continue to expand to meet new market demands at a sustainable pace.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.6
• /
• pp.458-467
• /
• 2016

Salt is the most important substance in physiological activities of the human body concerning transport of the ingested nutrients into the blood. Thus, the most ideal salt must not contain any harmful ingredients such as cadmium, mercury, lead, and arsenic. However, it is legal to include trace amounts of the hazardous ingredients in salt owing to a technical limitation, because salt is generally obtained from seawater. This paper reported an experimental result about a new method of manufacturing high-quality table salts without hazardous ingredients by using "$15^{\circ}C$ low-temperature vacuum drying technology," applied to the sequential extraction phenomenon of seawater with increasing the concentration. The world's best table salt can be produced if the present results are applied and extended to the traditional solar salt industry.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.37.2-37.2
• /
• 2010

Recently $Li_{1.2}Ni_{0.2}Mn_{0.6}O_2$ has been consistently examined and investigated by scientists because of its high lithium storage capacity, which exceeds beyond the conventional theoretical capacity based on conventional chemical concepts. Consequently, $Li_{1.2}Ni_{0.2}Mn_{0.6}O_2$ is considered as one of the most promising cathode candidates for next generation in Li rechargeable batteries. Yet the mechanism and the origin of the overcapacity have not been clarified. Previously, many authors have demonstrated simultaneous oxygen evolution during the first delithiation. However, it may only explain the high capacity of the first charge process, and not of the subsequent cycles. In this work, we report a clarified interpretation of the structural evolution of $Li_{1.2}Ni_{0.2}Mn_{0.6}O_2$, which is the key element in understanding its anomalously high capacity. We identify how the structural evolution of $Li_{1.2}Ni_{0.2}Mn_{0.6}O_2$ occurs upon the electrochemical cycling through careful study of electrochemical profiles, ex-situ X-ray diffraction (XRD), HR-TEM, Raman spectroscopy, and first principles calculation. Moreover, we successfully separated the structural change at subsequent cycles (mainly cation rearrangement) from the first charge process (mainly oxygen evolution with Li extraction) by intentionally synthesizing sample with large particle size. Consequently, the intermediate states of structural evolution could be well resolved. All observations made through various tools lead to the result that spinel-like cation arrangement and lithium environment are created and embedded in layered framework during repeated electrochemical cycling.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.960-966
• /
• 2017

In this paper, we proposed an algorithm that can extract lesion by inputting a medical image. Feature points are extracted using SIFT algorithm to extract genetic training of medical image. To increase the intensity of the feature points, the input image and that raining image are matched using vector similarity and the lesion is extracted. The vector similarity match can quickly lead to lesions. Since the direction vector is generated from the local feature point pair, the direction itself only shows the local feature, but it has the advantage of comparing the similarity between the other vectors existing between the two images and expanding to the global feature. The experimental results show that the lesion matching error rate is 1.02% and the processing speed is improved by about 40% compared to the case of not using the feature point intensity information.

• Journal of KIISE:Software and Applications
• /
• v.34 no.10
• /
• pp.889-899
• /
• 2007

In proteomics, recent advancements In mass spectrometry technology and in protein extraction and separation technology made high-throughput analysis possible. This leads to thousands to hundreds of thousands of MS/MS spectra per single LC-MS/MS experiment. Such a large amount of data creates significant computational challenges and therefore effective data analysis methods that make efficient use of computational resources and, at the same time, provide more peptide identifications are in great need. Here, SIFTER system is designed to avoid inefficient processing of shotgun proteomic data. SIFTER provides software tools that can improve throughput of mass spectrometry-based peptide identification by filtering out poor-quality tandem mass spectra and estimating a Peptide charge state prior to applying analysis algorithms. SIFTER tools characterize and assess spectral features and thus significantly reduce the computation time and false positive rates by localizing spectra that lead to wrong identification prior to full-blown analysis. SIFTER enables fast and in-depth interpretation of tandem mass spectra.

• Korean Journal of Food Science and Technology
• /
• v.13 no.1
• /
• pp.20-24
• /
• 1981

Residues of neoasozine in rice grain were determined by neutron activation and colorimetric techniques. Twice application of the chemical before flowering did not lead to any increased residue level while 4-times application resulted in significant increase in the residue level up to 0.54-0.75 mg $As_2O_3/kg$. The partition ratio of arsenic residues into polished rice grain and bran was 73 : 27 in 100% polishing while most of the residues in the bran was transferred to oil cake fraction during solvent extraction, reaching up to 2.9 mg $As_2O_3/kg$. The neutron activation technique was advantageous because of its high sensitivity and the smaller sample amounts required for analysis.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.19-35
• /
• 2003

In order 새 investigate the spatial and seasonal variations of heavy metal pollution in heavily industrialized urban area, urban roadside sediments were collected for five years from gully pots in Seoul City. A series of studies have been carried out concerning the physicochemical characteristics of the sediments in order to evaluate the contamination of heavy metals such as Cd, Co, Cr, Cu, Ni, Pb and Zn. Roadside sediments and uncontaminated stream sediments were analyzed for total metal concentrations using acid extraction. The roadside sediments are characterized by very high concentrations of Zn (2,665.0$\pm$1,815.0 $\mu\textrm{g}$/g), Cu (445.6$\pm$708.0 $\mu\textrm{g}$/g), Pb (214.3$\pm$147.9 $\mu\textrm{g}$/g) and Cr (182.1$\pm$268.8 $\mu\textrm{g}$/g), indicating an artificial accumulation of these metals to the sediment chemistry. Comparing with average contents of uncontaminated stream sediments, roadside sediments were shown zinc 14 times (up to 64.4), copper 9 times (up to 181.7), lead 6 times (up to 63.7), cobalt 6 times (up to 168.7), nickel 4 times (up to 98.4), cadmium 2 times (up to 12.8) and chrome 2 times (up to 40.2) high content. The relative degree of heavy metal pollution for roadside sediments collected from each district in Seoul City is evaluated using the “geoaccumulation index”. As a result, heavy-metal contamination is highest centering the oldest residential district and industry area, and contamination level decreases as go to outer block of the city. The factor analysis results indicate that the levels of Cu, Ni, Fe and Cr are strongly related to numbers of factories, whereas the concentrations of Cr, Zn and Cd dependant on pollution index, indicating artificial contamination due to site-specific traffic density.