• Title/Summary/Keyword: Leaching rate

Search Result 301, Processing Time 0.03 seconds

Pre-leaching of Lithium and Individual Separation/Recovery of Phosphorus and Iron from Waste Lithium Iron Phosphate Cathode Materials (폐리튬인산철 양극재로부터 리튬의 선침출 및 인과 철의 개별적 분리 회수 연구)

  • Hee-Seon Kim;Boram Kim;Dae-Weon Kim
    • Clean Technology
    • /
    • v.30 no.1
    • /
    • pp.28-36
    • /
    • 2024
  • As demand for electric vehicles increases, the market for lithium-ion batteries is also rapidly increasing. The battery life of lithium-ion batteries is limited, so waste lithium-ion batteries are inevitably generated. Accordingly, lithium was selectively preleached from waste lithium iron phosphate (LiFePO4, hereafter referred to as the LFP) cathode material powder among lithium ion batteries, and iron phosphate (FePO4) powder was recovered. The recovered iron phosphate powder was mixed with alkaline sodium carbonate (Na2CO3) powder and heat treated to confirm its crystalline phase. The heat treatment temperature was set as a variable, and then the leaching rate and powder characteristics of each ingredient were compared after water leaching using Di-water. In this study, lithium showed a leaching rate of approximately 100%, and in the case of powder heat-treated at 800 ℃, phosphorus was leached by approximately 99%, and the leaching residue was confirmed to be a single crystal phase of Fe2O3. Therefore, in this study, lithium, phosphorus, and iron components were individually separated and recovered from waste LFP powder.

Continuos-Flow culture of Hepatocytes in Sugar-derivatized poly (lactide-co-glycolide) Scaffolds Prepared by Gas-foaming/salt-leaching Method

  • Yun, Jun-Jin;Park, Tae-Gwan
    • 한국생물공학회:학술대회논문집
    • /
    • 2000.04a
    • /
    • pp.141-144
    • /
    • 2000
  • Highly open porous polymer matrices are required for high density cell seeding, efficient nutrient, and oxygen supply to the cells cultured in the three dimensional matrices. However, there are severe problems of mass transfer limitations within the cell/scaffolds culture system. Thus we hypothesize that continuos-flow culture conditioning of cells with the scaffolds may improve the cell viability and the differentiated function. In this study, we fabricated porous PLGA scaffolds by using gas-foaming/salt-leaching method as previous described. Viscous PLGA gel paste contains ammonium bicarbonate particulates, acting as a gas-foaming agent as well as a salt-leaching porogen, were cast into Teflon mold and dried. Ammonium bicarbonate salt upon contact to an acidic aqueous solution evloves gaseous ammonia and carbon dioxide by itself. And we conjugated galactose moiety [AGA; $N-(aminobuty1)-O-{\beta}-D-galactopyranosyl-(1{\rightarrow}4)-D-glucoamide]$ to the terminal end group of a PLGA to increase the cell adhesion and matain the differentiated function of hepatocytes. Cell-seeded scaffolds were secured in a flow bioreactor chamber and exposed to continuous flow at 5 ml/min. As a result of our study, the high yield of hepatocytes attachment was accomplished by increasing the concentration of PLGA-AGA conjugate in polymer scaffolds and cells in the scaffolds under continuos flow condition maintained a high level of viability and albumin secretion rate of cultured hepatocytes showed a higher level that of control groups.

  • PDF

Emission Characteristics of Metal Elements from a MSW Incinerator (도시폐기물 소각시설에서의 금속배출특성 연구)

  • Kim, Ki-Heon;Kim, Sam-Cwan;Song, Geum-Ju;Seo, Yong-Chil
    • Journal of the Korean Society of Combustion
    • /
    • v.8 no.1
    • /
    • pp.1-8
    • /
    • 2003
  • The behavior and characteristics of heavy metals at different streams in a MSWI(Municipal Solid Waste Incinerator) with a capacity of 100tonnes/day were investigated by measuring the concentration of heavy metals and gases and analyzing their leaching data from ashes. Metal components of Cr, Cu, Cd and Pb were in higher concentrations in the fly ashes collected after the water spray tower than in the bottom ashes. It was due to condensation by a lower temperature with water spray cooling. Metal contents in the bottom ash became higher for finer particles as expected. The mass balance of heavy metals in different stream was estimated from the analyzed data in bottom ash and collected dusts at different locations. For the lower volatility of metals such as Pb, Cu, Cr, 88-97% of them remained in the bottom ash, while Cd and Hg escaped from the combustor with remaining in bottom ash of 18.4 and 0.8%, respectively. In most cases the leaching rate of fly ash showed higher values than that of bottom ash, with the their average acidities of 9.8 and 11.9 respectively.

  • PDF

Studies on the Application Rate of Cattle Slurry and Urea N on Productivity of Silage Corn and Leaching of Nitrogen in Lysimeter (액상발효우분(Cattle Slurry) 및 요소의 N 시용수준이 옥수수의 생산성과 N의 용탈에 관한 연구)

  • 육완방;최기춘
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.22 no.1
    • /
    • pp.37-44
    • /
    • 2002
  • This study was conducted to investigate the effects of the application rate of cattle slury and urea N on productivity of corn and environmental pollution in com cultivation soil. The experiment was conformed in lysimeter which was constructed with 0.33m diameter and 1m height. This study was arranged in split plot design. Main plots were the application rate of mineral fertilizer, as urea, such as 0, 100 and 200kgN/ha and subplots were the application rate of cattle slurry, such as 0, 200 and 400kgN/ha. The results obtained were summarized as follows. 1. Dry matter yields of corn increased as the application rate of cattle slurry and urea increased. 2. Total nitrogen content of whole corn was increased as the application rate of cattle slurry and urea increased 3. The average nitrate content in leaching water by application rate of the slurry and urea N was 7.78$\mu\textrm{g}$/$m\ell$(ranged from 6.27 to 9.02$\mu\textrm{g}$/$m\ell$). Nitrate content was hardly influenced by application rates of the slurry and urea. However, nitrate content rises in proportion to a rise in precipitation.

Evaluating germination of lettuce and soluble organic carbon leachability in upland sandy loam soil applied with rice husk and food waste biochar (왕겨 바이오차 및 음식물쓰레기 바이오차가 밭 사양토에서 상추발아 및 수용성 유기탄소 용출에 미치는 영향 평가)

  • Han, Kyung-Hwa;Zhang, Yong-Seon;Jung, Kang-Ho;Cho, Hee-Rae;Sonn, Yeon-Kyu
    • Korean Journal of Agricultural Science
    • /
    • v.41 no.4
    • /
    • pp.369-377
    • /
    • 2014
  • This study was carried out to evaluate the effect of rice husk (RHB) and food waste biochar (FWB) on upland soil with sandy loam texture, in terms of physico-chemical analysis, lettuce seed germination test, and orgainc carbon leaching experiment. RHB and FWB had different physico-chemical properties each other. Carbon to nitrogen ratio (C/N ratio) of RHB was 32, showing two times higher than that of FWB. FWB had high salt and heavy metal content, compared to RHB. This is probably due to different ingredients and production processing between two biochars each other. Results of germination test with Lettuce showed lower germination rate when FWB was applied because of higher salt concentration compared to control and RHB. Organic carbon leaching test using saturated soil column (${\Phi}75{\times}h75mm$) with $10MT\;ha^{-1}$ biochar application rate, showed higher saturated hydraulic conductivity in rice husk biochar treatment column, compared to control and food waste biochar treatment. The highest total organic carbon concentration in column effluent was lower than those in both of rice husk biochar and food waste biochar, whereas the differences was negligible after 9 pore volumes of effluent. Consequently, biochars from byproducts such as rice husk and food waste in sandy loam textured upland soil could enhance a buffer function such as reduction of leaching from soil, but the harmful ingredient to crops such as high salt and heavy metals could limit the agricultural use of biochars.

Contaminant Assessment of Dredged Material by Leaching Test - focused on the impact assessment of the coastal environment - (용출시험에 의한 항만 준설토의 오염도 평가 -해양환경에 미치는 영향평가를 중심으로-)

  • Cho, Hong-Yeon;Choi, Kwang-Hee;Yoon, Gil-Lim
    • Journal of the Korean GEO-environmental Society
    • /
    • v.2 no.2
    • /
    • pp.5-12
    • /
    • 2001
  • The physical characteristics and contaminant level of the dredged material generated by the channel maintenance and water quality improvement was analysed in a series of the study of the beneficial uses of dredged material in harbor. Dredged materials were sampled at Kunsan, Kohyun, Samchunpo, and Pohang Harbors and tested in the laboratory(leaching Test). From the experimental results, the specific gravity does not shows large differences, while almost grains are composed of silts and oyster shells except Pohang harbor containing gravels. The COD release rate and ignition loss is high in Kunsan dredged materials because of the watershed pollutants loads. The nutrient release rate is also relatively high. The release concentration of the heavy metals shows the highest values on Zn, Pb, Cd, Cu constituents at Kohyun, Kunsan, Samchunpo, Kunsan, respectively.

  • PDF

Leaching of Trifluralin in the Commerce Clay Loam Soil (토양 중 Trifluralin의 용탈)

  • Kim, Jung-Ho
    • Korean Journal of Environmental Agriculture
    • /
    • v.15 no.4
    • /
    • pp.464-471
    • /
    • 1996
  • Trifluralin was selected to study the leaching potentials related to the pollution on Commerce silty clay loam soil near Baton Rouge, Louisiana, USA. The batch equilibrium of trifluralin resulted in the Koc value of 875. When the soil columns(5.4 cm i.d. ${\times}$ 26 cm length) were leached with three pore volumes of water, the distributions of trifluralin in soil and leachate were 99.993% and 0.007% of the total recoveries, respectively. When applied at the rate of 1,683 g/ha in the field, the amount of trifluralin within the $0{\sim}10$ cm soil depth was 96.9% of that within the $0{\sim}60cm$ soil depth 31 days after application. The concentrations of trifluralin detected in 1- and 2m- depth wells during 62 days after application ranged from 0.04 ng/mL to 0.08 ng/mL, which were lower than 2.0 ng/mL of the U.S. EPA advisory levels for drinking water. Trifluralin was strongly adsorbed on soil and hardly reached ground water. The leaching properties of trifluralin in the fields were predicted and concurred with those in the columns.

  • PDF

The Efficiency of Fe Removal Rate from Gold Ore in the Oxidation Zone by Ammonia Leaching (암모니아 용출에 의한 산화대 금 광석으로부터 Fe 제거 효율에 관한 연구)

  • Kim, Bong-Ju;Cho, Kang-Hee;Choi, Nag-Choul;Park, Cheon-Young
    • Journal of the Mineralogical Society of Korea
    • /
    • v.29 no.3
    • /
    • pp.113-122
    • /
    • 2016
  • This study aims to improve the recovery of gold and silver by removing hematite from gold ore of an oxidation zone with ammonia solution. Quartz, hematite and muscovite were present in the oxidation zone, while hematite was hydrogenous. As a result of performing an ammonia leaching test on variables, it is found that the maximum Fe leaching parameter was $-45{\mu}m$ particle size, 1.0 M sulfuric acid concentration, 5.0 g/l ammonium sulfate concentration and 2.0 M hydrogen peroxide concentration. It is also confirmed that goethite was precipitated and formed from that ammonia elution. As the amount of Fe-removal was increased in a solid-residue, the recovery of Au and Ag were increased, too.

Leaching, soil residue, and volatilization of dicamba from controlled release granular formulations (방출조절형 dicamba 입제의 용탈, 토양잔류 및 휘산)

  • Oh, Kyeong-Seok;Oh, Byung-Youl;Park, Seung-Soon;Jin, Yong-Duk;Lee, Jae-Koo
    • The Korean Journal of Pesticide Science
    • /
    • v.2 no.1
    • /
    • pp.53-58
    • /
    • 1998
  • In order to minimize harmful side effects, extend weed control performance, and control the releasing rate of the active ingredient, dicamba controlled release granular formulations were prepared with starch as matrix. Leaching, soil residue, and volatilization of the granules were compared with dicamba soluble concentrate formulation (SL). Leaching of dicamba through the soil applied with the granules could be reduced more than 50% as compared with that of dicamba SL. The half life of dicamba in loamy soil treated with the granules was 50 to 51 days, while that in sand loamy soil was 50 to 58 days. Whereas, the half life of dicamba in loamy and sand loamy soil applied with dicamba SL was 24 and 22 days, respectively. Volatilization of dicamba from the granules was 10 times less than that of dicamba SL.

  • PDF

Guideline for Media-contact Recycling of Steel-Making Slag: Leaching Tests and Comparison of International Recycling Guidelines (제강슬래그의 친환경적 매체접촉형 재활용 방안: 용출시험 및 국내외 재활용 지침 비교)

  • Donghyun Kim;Inseong Hwang;Won Sik Shin
    • Journal of Soil and Groundwater Environment
    • /
    • v.29 no.1
    • /
    • pp.39-50
    • /
    • 2024
  • Slags from steel-making industry have been recycled at a target rate of 95% and most of them are recycled as media-contact type such as fill and cover materials in Korea. However, as they contain free phase CaO during their generation, they may not only expand and collapse upon contact with water, but high pH leachate and heavy metals leaching may occur. In this study, the Korean leaching procedure (KLP) and up-flow percolation test were performed for the samples collected from 17 steel-making production plants in Korea. The waste quality criteria were met in all tests, but pH of the samples was above 10. There are no regulations on the pH of leachate in most of the countries, however, Germany, Italy, and Australia have set a pH range of 10 to 13 for the leachates. Although slag leachate cannot be considered hazardous based only on its high pH, it is necessary to reduce the pH of leachate to minimize the impact on the surrounding environment. Furthermore, conflicting regulations on wastes handling and management in Korea created confusion on the types of wastes subject to recycling. Therefore, an appropriate management plan for steel-making slags needs to be established. To this end, this study attempted to provide a guideline for managing steel-making slag waste by considering international guidelines and current management practices in Korea.