• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.295-299
• /
• 2014

Electrical conductivities of complex perovskites, layered perovskite and Sr doped layered perovskite oxides were measured and analyzed for cathode materials of Intermediate Temperature-operating Solid Oxide Fuel Cells (IT-SOFCs). The electrical conductivities of $Sm_{1-x}Sr_xCoO_{3-\delta}$ (x = 0.3 and 0.7) exhibit a metal-insulator transition (MIT) behavior as a function of temperature. However, $Sm_{0.5}Sr_{0.5}CoO_{3-\delta}$ (SSC55) shows metallic conductivity characteristics and the maximum electrical conductivity value compared to the values of $Pr_{0.5}Sr_{0.5}CoO_{3-\delta}$ (PSC55) and $Nd_{0.5}Sr_{0.5}CoO_{3-\delta}$ (NSC55). The electrical conductivity of $SmBaCo_2O_{5+\delta}$ (SBCO) exhibits a MIT at about $250^{\circ}C$. The maximum conductivity is 570 S/cm at $200^{\circ}C$ and its value is higher than 170 S/cm over the whole temperature range tested. $SmBa_{0.5}Sr_{0.5}Co_2O_{5+\delta}$ (SBSCO), 0.5 mol% Sr and Ba substituted at the layered perovskite shows a typically metallic conductivity that is very similar to the behavior of the SSC55 cathode, and the maximum and minimum electrical conductivity in the SBSCO are 1280 S/cm at $50^{\circ}C$ and 280 S/cm at $900^{\circ}C$.

• 대한화학회지
• /
• 제55권4호
• /
• pp.697-702
• /
• 2011

새로운 층상구조인 페로브스카이트 망가나이트 $La_{0.5}Sr_{1.5}Mn_{0.5}Cr_{0.5-x}Fe_xO_4$ (x=0.15, 0.3) 를 세라믹 방법에 의해 합성하였다. 분말 X-선 측정을 통하여 I4/mmm 의 정방정계 단위세포를 확인하였다. 전기전도도 측정을 통하여 부도체의 특성을 확인하였으며 전기전도도는 3D 홉핑 메커니즘에 의해 나타난다. 자기적 특성은 모두 반강자성의 특성을 보인다.

• Bulletin of the Korean Chemical Society
• /
• 제18권6호
• /
• pp.623-628
• /
• 1997

A layered perovskite oxide, $RbLa_2Ti_2NbO_{10}$, was prepared and investigated for proton exchange and intercalation behaviors. Its protonated form, $Hla_2Ti_2NbO_{10}$, exhibits the Bronsted acidity and reacts with organic amines. Polyoxonuclear cation, 4Al_{13}$, was then introduced into the interlayer by refluxing octylamine-intercalated compound with an $Al_{13}$ pillaring solution. These layered oxides were characterized by X-ray diffractometer, thermogravimeter, FT-infrared spectrometer and elemental analyzer. It is observed that the polyoxonuclear cation-pillared material exhibits a bilayer structure and is thermally more stable than organic counterpart at higher temperatures. The surface area of the pillared material annealed at 400 ℃ was the value of 25.1 m²/g.

• Bulletin of the Korean Chemical Society
• /
• 제17권8호
• /
• pp.730-735
• /
• 1996

The layered perovskite oxide, KSr2Nb3O10, was synthesized. The interlayer potassium cations were readily exchanged by protons in hydrochloric acid solution to give the protonation compound, HSr2Nb3O10·0.5H2O. The intercalation compounds, [NH3(CH2)nNH3]xSr2Nb3O10, were also obtained by acid-base reactions between the protonation compound and organic bases, 1,n-alkyldiamines. The interlayer distances in the intercalation compounds were linearly increased with the increase of the number of carbon (Δc/Δn=1.05 Å) in 1,n-alkyldiamines. The intercalated alkyldiammonium ions formed a paraffin-like monolayer with average tilting angle (θ) of ca. 56°. The intercalation reactions occurred stoichiometrically. The thermal decomposition process of the intercalation compounds showed distinct three steps due to the desorption of hydrated water, the decomposition of organic moiety, and the decomposition of Sr-related compounds.

• Bulletin of the Korean Chemical Society
• /
• 제22권3호
• /
• pp.298-302
• /
• 2001

A site preference of niobium atom in Rb2-xLa2Ti3-xNbxO10 (0.0 $\leq$ x $\leq1.0)$ and RbLa2-xCaxTi2-xNb1+xO10 (0.0 $\leq$ x $\leq2.0)$, which are the solid-solutions between Rb2La2Ti3O10 and RbCa2Nb3O10, has been investigated by Raman spectroscopy. The Raman spectra of Rb2-xLa2Ti3-xNbxO10 (0.0 $\leq$ x $\leq1.0)$ gave an evidence that niobium atoms substituted for titanium atoms preferably occupy the highly distorted outer octahedral sites rather than the central ones in triple-octahedral perovskite layers. In contrast, the Raman spectra of RbLa2-xCaxTi2-xNb1+xO10 (0.0 $\leq$ x $\leq2.0)$ showed no clear information for the cationic arrangement in perovskite slabs. This difference indicated that a site preference of niobium atoms is observed only when the linear Rb-O-Ti linkage can be replaced by much stronger terminal Nb-O bond with double bond character. From comparison with the Raman spectroscopic behavior of CsLa2-xA’xTi2-xNb1+xO10 (A’ = Ca and Ba; 0.0 $\leqx\leq2.0)$, it is also proposed that a local difference in arrangement of interlayer atoms causes a significantly different solid acidity and photocatalytic activity of the layered perovskite oxides, despite their crystallographically similar structures.

• Bulletin of the Korean Chemical Society
• /
• 제17권2호
• /
• pp.168-172
• /
• 1996

The variations of the structural detail of layered perovskite-type oxides, Na2Ln2Ti3O10 (Ln=La, Nd, Sm, Gd), have been refined by Rietveld analyses of their powder X-ray diffraction data. Although the c-axis strongly decreases from Ln=La to Nd, Sm, or Gd, the length of Na-O bond along the c-axis that is regarded as the sodium layer spacing is not dependent on the unit cell parameter. Such a behavior is explained by the fact that Na-O bond is in competition with Ti-O one of the perovskite slab. Increased covalency of this Ti-O bond by the lattice contraction leads to weakening of the attaching strength of Na ion. This picture is consistent with the experimental observation that Na ion conductivity of Na2Ln2Ti3O10 increases from Ln=La to Nd, Sm, or Gd despite strong contraction of the unit cell volume.

• 한국자기학회지
• /
• 제9권3호
• /
• pp.131-135
• /
• 1999

층상 페로브스카이트형 구조를 가진 망간 산화물의 전자구조를 이해하기 위하여 단일 층상을 가진 LaSrMnO4의 전자구조를 제1원리의 국소 밀도 범함수 이론을 근거로 사용하는 Full Potential Linearized Augmented Plane Wave(FLAPW)방법으로 구하였다. 또한 홀 농도 변환에 따른 자기구조의 변화의 이해를 위해 Mn4+의 Sr2MnO4의 전자구조 계산을 행하여 전자구조를 비교하였다. 총에너지 계산 결과, LaSrMnO4는 면내의 반강자성 구조가 강자성 구조보다 더 낮은 에너지를 가지고 있었다. 또한, Mn-O 팔면체의 c축으로의 야안-텔러 왜곡(Jahn-Teller distortion)에 의해 에너지 갭이 나타나며, 이에 따른 3z2-r2 궤도 정렬에 의해 2차원 면내의 반강자성 상태가 안정됨을 볼 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.48.2-48.2
• /
• 2010

The effect of additives as rare-earth in dielectric materials has been studied to meet the development trend in electronics on the miniaturization with increasing the capacitance of MLCCs (multi-layered ceramic capacitors). It was reported that the addition of rare-earth oxides in dielectrics would contribute to enhance dielectric properties and high temperature stability. Especially, dysprosium and thulium are well known to the representative elements functioned as selective substitution in barium titanate with perovskite structure. The effects of these additives on microstructure and electric properties were studied. The 0.8 mol% Dy doped $BaTiO_3$ and the 1.0 mol% Tm doped $BaTiO_3$ had the highest electric properties as optimized composition, respectively. According to the increase of rare-earth contents, the growth of abnormal grains was suppressed and pyrochlore phase was formed in more than solubility limits. Furthermore, the effect of two rare-earth elements co-doped $BaTiO_3$ on the dielectric properties and insulation resistance was investigated with different concentration. The dielectric specimens with $BaTiO_3-Dy_2O_3-Tm2O_3$ system were prepared by design of experiment for improving the electric properties and sintered at $1320^{\circ}C$ for 2h in a reducing atmosphere. The dielectric properties were evaluated from -55 to $125^{\circ}C$ (at $1KHz{\pm}10%$ and $1.0{\pm}0.2V$) and the insulation resistance was examined at 16V for 2 min. The morphology and crystallinity of the specimens were determined by microstructural and phase analysis.

• 한국결정성장학회지
• /
• 제25권3호
• /
• pp.116-120
• /
• 2015

혼합이온 전도체인 $K_2NiF_4$-type 산화물인 $La(Ca)_2Ni(Cu)O_{4+{\delta}}$ 분말을 합성하여 결정구조 분석과 분말의 나노구조화에 따른 고체산화물 연료전지의 양극 성능을 비교 평가하였다. 이온 반경이 큰 Cu가 Ni 자리에 치환되어 Ni-O 팔면체 구조에서 c 축 방향으로 결정구조가 팽창하였으며, Ni-Cu의 Jahn-Teller 뒤틀림으로 산소이온 산화 환원 반응과 이온 전도도 특성에 영향을 주었다. 특히 나노구조의 $La(Ca)_2Ni(Cu)O_{4+{\delta}}$ 분말의 경우 표면 촉매성능이 향상되어 단위 전지 성능 향상 결과를 얻을 수 있었다. Ni-YSZ 음극 지지체에 8YSZ 전해질을 dip-coating한 후 $La(Ca)_2Ni(Cu)O_{4+{\delta}}$ 분말을 양극으로 도포하여 얻은 SOFC 단위성능 측정 결과 $800^{\circ}C$에서 $1w/cm^2$의 최대 출력 값을 얻을 수 있었다.