• 제목/요약/키워드: Layered clay

검색결과 120건 처리시간 0.03초

폴리머콘크리트의 결합제로서 PET재활용 폴리머와 나노 MMT 복합체의 특성 (Characterization of Polymer and Nano-MMT-composite as Binder of Recycled-Pet Polymer Concrete)

  • 조병완;박승국
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.292-295
    • /
    • 2004
  • Recently, polymer-clay hybrid materials have received considerable attention from both a fundamental research and application point of view. This organ-inorganic hybrid, which contains a nanoscale dispersion of the layered silicates, is a material with greatly improved thermal and mechanical characteristics. Two classes of nanocomposites were synthesized using an unsaturated polyester resin as the matrix and sodium montmorillonite as well as an organically modified montmorillonite as the reinforcing agents. X -ray diffraction pattern of the composites showed that the interlayer spacing of the modified montmorillonite were exfoliated in polymer matrix. The mechanical properties also supported these findings, since in general, tensile strength, modulus with modified montmorillonite were higher than the corresponding properties of the composites with unmodified montmorillonite. Adding organically modified clay improved the tensile strength of unsaturated polyester by $22\%$ and the tensile modulus of unsaturated polyester was also improved by $34\%$.

  • PDF

지표면 재하시 토층구성에 따른 지중응력분포에 관한 연구 (A Study on the Stress Distribution in Soil According to the Composition of the Soil Layer in Case of Surface Loading)

  • 임종석;정상균;하혁
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 지반공학 공동 학술발표회
    • /
    • pp.510-516
    • /
    • 2005
  • This research aims to verify the stress distribution in soil according to the composition of the soil layer in case of surface loading. For this purpose, loading tests with measurement of stresses in the soil on four kinds of layered model ground in laboratory were performed. Those are (1)homogeneous sand, (2)gravel underlain by sand, (3)sand underlain by clay and (4)gravel underlain by clay. Test results are compared and analysed for the compositions of the soil layers. based on the results obtained, it is found that the larger the difference of the strengths of upper and lower layer is, the smaller the stress in the soil in case of surface loading is.

  • PDF

점성토의 점소성 효과를 고려한 다층지반의 액상화 해석 (Liquefaction Analysis at Multi-Layered Ground Considering Viscoplastic Effect of Clay)

  • 윤용선;이재득;김용성
    • 한국농공학회논문집
    • /
    • 제55권5호
    • /
    • pp.59-69
    • /
    • 2013
  • 본 연구에서는 동적 점탄-점소성 구성식에 기초한 다층지반의 1차원 액상화 해석을 수행하였다. 일본 고베 포트아일랜드에서 발생한 1995 Hyogoken Nanbu 지진에 대하여 지반 모델링을 하였으며, 사질토 지반에는 탄소성 모델을, 점성토 지반에는 점탄-점소성 모델 및 탄-점소성 모델을 각각 적용하였다. 본 연구 결과, 모델 지반의 경우 지표 10 m 아래를 전후하여 액상화가 발생하였으며 액상화가 발생한 지반을 통과하는 지진파는 감쇠특성을 나타내고 이 때 전단변형률을 크게 증가시켰다. 또한, 대변형률 영역에서의 점성토의 동적거동 해석에서는 점소성 거동특성이 지배적이므로 점소성 모델의 적용이 중요함을 알 수 있었다. 한편 동적 점탄-점소성 구성모델은 대변형률 영역에서 점성토의 소성변형을 유발하는 대형 지진 발생시 점성토의 증폭 및 감쇠특성 분석에 적용 가능한 모델임을 확인하였다.

경량혼합토의 도로 노상층 재료 사용 가능성 평가 (Evaluation of Lightweight Soil as a Subgrade Material)

  • 박대욱;보베이트하이
    • 한국도로학회논문집
    • /
    • 제15권5호
    • /
    • pp.57-64
    • /
    • 2013
  • PURPOSES : It is to evaluate lightweight soil as a subgrade material based on mechanical tests and calculation of pavement performance. METHODS : In this research, various contents of cement and air foam are used to make lightweight soil using wasted dredged soil. Uniaxial compressive strength test is conducted to evaluate strength of 7 and 28 day cured specimens. Secant modulus was calculated based on the stress and strain relationship of uniaxial compressive strength test. Resilient modulus test was measured using by repeated triaxial compression test. The measured resilient modulus was used in layered elastic program to predict fatigue and rutting life at a given pavement structure. RESULTS : Uniaxial compressive strength increases as cement content increases but decrease as air foam content increases. Resilient modulus also increases as cement content increases and decrease as air foam content decrease. CONCLUSIONS : It is concluded that dredge clay soil can be used as subgrade layer material using by lightweight treated soil method.

저에너지 UV 경화형 무용제 소재 개발 (Solventless UV Curable Material for Low Cost System)

  • 김광인;이주헌;이현주;한학수
    • 한국수소및신에너지학회논문집
    • /
    • 제28권1호
    • /
    • pp.77-84
    • /
    • 2017
  • In this study, Poly-urethane acrylate (PUA) was synthesized by the reaction between Polycaprolactonetriol (PCLT) and Isophorone dissocyanate (IPDI) and hybridized with inorganic materials. Tetraethylortho silicate (TEOS) and nano clay (Closite 20A) were used as inorganic particles. For the hybridization of TEOS with PUA, sol-gel method is used, in which TEOS is made into spherical particle in the firsthand. In the case of Nano clay, hybridization is carried out through the dispersion as Nano clay has a layered structure. The solution of PUA hybrid was made into a film after UV curing and its thermo and electrical properties were measured. The experimental analysis and result demonstrate that the PUA hybrid shows an improved thermal properties and lower dielectric constant than that of the non-hybrid PUA. The trend of improved properties was different depending on structure of inorganic materials.

나노클레이 첨가에 따른 할로겐프리 난연컴파운드의 기계적 특성에 관한 연구 (A Study on Mechanical Properties Improvement of Halogen-free Flame Retardant Compounds by Nanoclay Addition)

  • 황찬연;양종석;성백용;김지연;박대희
    • 한국전기전자재료학회논문지
    • /
    • 제28권2호
    • /
    • pp.126-130
    • /
    • 2015
  • In this study, some materials are organized and experimented with variables to obtain the optimum mix proportion for the mechanical property of halogen free flame resistance compound with varying addition of nano clay. Tensile strength, density and stiffness are tested in the room temperature. In this study, unlike existing layered structure, nano clay with tabular structure is used and sufficient stiffness, strength, thermal stability and gas block capability can be achieved with small amount of addition. Tensile strength and elongation test show high rupture strength only in specimens with compatibilizing agents while density test shows average measurement in all the specimens except T-9. It was confirmed that the measurement value according to the additives in compatibilizing agent or in nano clay of hardness test represents similarly.

해수 침투에 대한 층상 불균질성 및 지하수 양수 방식의 영향 삼차원 수치 모의 (Three-Dimensional Numerical Simulation of Impacts of Layered Heterogeneity and Groundwater Pumping Schemes on Seawater Intrusion)

  • 박화석;김중휘;염병우;김준모
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제13권4호
    • /
    • pp.8-21
    • /
    • 2008
  • 지질 매체의 층상 불균질성과 지하수 양수 방식이 해안 대수층 내에서의 지하수 유동과 염분 이동에 미치는 영향을 정량적으로 분석하기 위하여 수리동역학적 분산 수치 모델을 이용한 일련의 삼차원 수치 모델링이 수행되었다. 해수 침투에 대한 층상 불균질성의 영향을 평가하기 위하여 하부 사토층(대수층)과 상부 점토층(준대수층)으로 구성된 층상 불균질 해안 대수층과 이에 상응하는 등가의 물질로 구성된 균질 해안 대수층을 수치 모델링하였다. 또한 해수 침투에 대한 지하수 양수 방식의 영향을 평가하기 위하여 전체 수치 모델링 기간 동안에 동일한 양의 지하수를 양수하는 연속적인 지하수 양수 방식과 두 개의 주기적인 지하수 양수 방식을 상기한 두 해안 대수층에 적용하였다. 수치 모델링 결과는 주기적인 지하수 양수 방식이 층상 대수층의 하부 사토층뿐만 아니라 상부 점토층에서의 지하수 유동과 염분 이동에 보다 중대한 악영향을 끼치며, 주기적인 지하수 양수 시에 양수 강도가 클수록 지하수 염수화가 공간적 및 시간적으로 더욱 심화됨을 보여준다. 이는 해수 침투에 의한 지하수 염수화를 최소화하기 위해서는 지속적인 지하수 양수 방식이 보다 더 적합할 수 있음을 의미한다. 또한 수치 모델링 결과는 주기적인 지하수 양수시에 상부 점토층에서의 지하수 염수화 양상이 하부 사토층에서의 그것에 비해 매우 다르게 발생함을 보여준다. 이러한 두 지층 사이의 지하수 염수화 양상의 차이는 층상 해안 대수층의 층상 불균질성에 기인하는 것으로 해석된다.

대심도 준설 매립지반에서의 층별침하 계측관리에 관한 사례 연구 (Instrumentation Management of Differential Settlement of the Deep Soft Ground with Dredged Clay Reclaimed in the Upper)

  • 김태형;강승찬;장지건;허성훈
    • 한국지반신소재학회논문집
    • /
    • 제22권1호
    • /
    • pp.87-96
    • /
    • 2023
  • 상부에 준설매립점토층이 존재하고 점토층이 두껍게 분포되어 있는 부산항 신항만에서 측정된 지표침하 값과 층별침하 값은 많은 차이가 있다. 이런 결과의 원인과 해결방안을 찾기 위하여 연약지반 개량에 사용된 층별침하계의 실태, 층별침하계 형식별 특성, 설치방법, 계측 빈도, 계측데이터 관리방안, 결과의 정리 및 분석 등에 대해 고찰해 보았다. 대변형이 발생하는 대심도 연약지반 개량공사에서 스크류타입의 층별침하계의 경우 휨 변형이 다른 형식의 계측기에 비해 적어 망실의 우려도 적고 각 지층별로 천공하여 계측기를 설치하므로 데이터의 신뢰도도 상대적으로 높다. 정도 높은 침하계측 자료의 양이 많을수록 침하분석 정밀도는 높아지므로 표준시방서에서 제시한 계측빈도보다 기준을 강화하여 관리가 필요하다. 층별침하계 계측데이터의 관리는 측점별 지표침하량, 층별침하량, 간극수압계 침하량과 같이 해당 구간의 침하량과 성토고의 경시 그래프 작성하여 관리하는 것이 바람직하다. 침하분석은 압축특성이 다른 다층지반일 경우 층별침하 데이터를 이용하여 각 지층별 압밀특성을 각각 산정하여 침하분석이 이루어지는 게 더 타당하다.

협재층 탐지를 위한 선단비저항 콘 (Cone Resistivity Penetrometer for Detecting Thin-Layered Soils)

  • 윤형구;정순혁;김래현;이종섭
    • 한국지반공학회논문집
    • /
    • 제26권8호
    • /
    • pp.15-25
    • /
    • 2010
  • 점토층 사이에 존재하는 모래 협재층은 연약지반 거동에 중요한 영향을 미친다. 협재층은 주로 표준 콘(단면적: $10cm^2$)에서 측정된 지반의 저항력과 간극수압 값을 이용하여 평가하고 있지만, 높은 해상도를 위하여 소형 콘이 널리 활용되고 있다. 본 논문의 목적은 연약지반에 얇게 분포된 협재층을 선단저항력, 주면마찰력 그리고 전기비저항을 이용하여 평가할 수 있는 전기비저항 콘(Cone Resistivity Penetrometer, CRP)을 개발하고 적용하는 것이다. CRP는 각각 실내실험(단면적: $0.78cm^2$, 직경: 1.0cm)과 현장실험(단면적: $1.76cm^2$, 직경: 1.5cm)에 활용되도록 제작하였으며, 길이는 표준 콘(단면적: $10cm^2$, 직경: 3.57cm)의 단면적과 마찰부의 면적비를 고려하여 제작하였다. 실내실험은 모래와 점토가 반복적으로 조성된 다층의 층상탐지 셀을 사용하여 각 지층의 경계면을 탐사하였으며, 현장실험은 광양지역에서 심도 6m부터 15m까지 관입실험을 수행하였다. CRP는 실내실험에서 측정된 선단저항력과 전기비저항으로 조성된 시료의 각 지층 경계면을 뚜렷하게 평가하였으며, 현장실험에서는 3개의 협재층을 탐지하였다. 본 연구에서 개발된 CRP는 실내 및 현장결과 적용성이 뛰어나 추후 유용하게 사용될 것으로 판단된다.

에폭시 수지와 층상광물로부터 나노복합재료의 합성 (Nanocomposites from Epoxy Resin and Layered Minerals)

  • 강재현;유성구;서길수
    • 폴리머
    • /
    • 제24권4호
    • /
    • pp.571-577
    • /
    • 2000
  • 본 연구에서는 새로운 형태의 에폭시 -광물 라노복합재료를 합성하기 위한 충전재를 층상 화합물인 나트륨-montmorillonite (Na-MMT)와 octadecyltrimethylammonium bromide와의 이온교환 반응으로부터 얻었다. 이렇게 합성된 octadecyltrimethylammonium-MMT에 3-aminopropyl triethoxysilane (APS)를 반응시켜 층상물질의 내부에 aminopropyl기가 삽입된 $C_{18}$ H$_{37}$ N($CH_3$)$_3$-APS-MMT를 합성하였다. 개질된 MMT의 층간저리와 구조를 X-선 회절 (XRD), IR 그리고 고상 $^{29}$ Si CP/MAS NMR을 이용하여 확인하였다. 이어서 $C_{18}$ H$_{37}$ N($CH_3$)$_3$-APS-MMT 존재하에 diglycidyl ether of bisphenol A (DGEBA)를 중합시켜 광물-고분자 나노복합재료를 합성하였다. 그리고 얻어진 나노복합재료의 구조를 XRD, 투과전자현미경 (TEM) 그리고 주사전자현미경 (SEM)으로 확인하였다. 확인 결과 합성된 유기몬모릴로나이트는 에폭시 고분자 내에서 실리케이트 층이 완전히 박리되어 있으며 단일층으로 고분자 매트릭스 내에 잘 분산되어 있음을 알았다.

  • PDF