• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.557-570
• /
• 2024

Due to interfacial ageing, chemical action and interfacial damage, the interface debonding may appear in the interfaces of composite laminates. Particularly, the laminates display a side-dependent effect at small scale. In this work, a three-dimensional (3D) and anisotropic thick nanoplate model is proposed to investigate the effects of imperfect interface and nonlocal parameter on the bending deformation, vibrational response and buckling stability of one-dimensional (1D) hexagonal quasicrystal (QC) layered nanoplates. By combining the linear spring model with the transferring matrix method, exact solutions of phonon and phason displacements, phonon and phason stresses of bending deformation, the natural frequencies of vibration and the critical buckling loads of 1D hexagonal QC layered nanoplates are derived with imperfect interfaces and nonlocal effects. Numerical examples are illustrated to demonstrate the effects of the imperfect interface parameter, aspect ratio, thickness, nonlocal parameter, and stacking sequence on the bending deformation, the vibrational response and the critical buckling load of 1D hexagonal QC layered nanoplate. The results indicate that both the interface debonding and nonlocal effect can reduce the stiffness and stability of layered nanoplates. Increasing thickness of QC coatings can enhance the stability of sandwich nanoplates with the perfect interfaces, while it can reduce first and then enhance the stability of sandwich nanoplates with the imperfect interfaces. The biaxial compression easily results in an instability of the QC layered nanoplates compared to uniaxial compression. QC material is suitable for surface layers in layered structures. The mechanical behavior of QC layered nanoplates can be optimized by imposing imperfect interfaces and controlling the stacking sequence artificially. The present solutions are helpful for the various numerical methods, thin nanoplate theories and the optimal design of QC nano-composites in engineering practice with interfacial debonding.

• Structural Engineering and Mechanics
• /
• 제12권1호
• /
• pp.17-34
• /
• 2001

The frictionless contact problem for a layered composite which consists of two elastic layers having different elastic constants and heights resting on two simple supports is considered. The external load is applied to the layered composite through a rigid stamp. For values of the resultant compressive force P acting on the stamp vertically which are less than a critical value $P_{cr}$ and for small flexibility of the layered composite, the continuous contact along the layer - the layer and the stamp - the layered composite is maintained. However, if the flexibility of the layered composite increases and if tensile tractions are not allowed on the interface, for P > $P_{cr}$, a separation may be occurred between the stamp and the layered composite or two elastic layers interface along a certain finite region. The problem is formulated and solved for both cases by using Theory of Elasticity and Integral Transform Technique. Numerical results for $P_{cr}$, separation initiation distance, contact stresses, distances determining the separation area, and the vertical displacement in the separation zone between two elastic layers are given.

• Investigative Magnetic Resonance Imaging
• /
• 제20권3호
• /
• pp.191-195
• /
• 2016

Among the various types of congenital meniscal anomalies, the double-layered lateral meniscus is extremely rare. The double-layered meniscus consists of both the upper additional and the lower normal meniscus. As the upper additional meniscus is mobile, it can be easily displaced, while the lower lateral meniscus is usually normal in shape and volume. A 42-year-old woman suffering from pain and locking of her left knee underwent Magnetic resonance imaging (MRI) examination and an arthroscopic surgery. A rare meniscal abnormality was seen in her left knee, which presented as a double-layered lateral meniscus with displacement. It was remarkable that the upper additional meniscus was displaced over the intercondylar eminence of the tibia and it mimicked a bucket-handle tear. Even though it is rare, it is necessary to consider the possibility of displaced double-layered meniscus in the differential diagnosis of a bucket-handle tear. Here, we report the MRI and arthroscopic findings of a displaced double-layered lateral meniscus, which was similar to the bucket-handle tear.

• 한국지열·수열에너지학회논문집
• /
• 제7권2호
• /
• pp.43-50
• /
• 2011

This paper presents how to analyze heat transfer characteristics of double-layered soils. Thermal response tests were conducted to measure the ground thermal conductivities of Joomunjin sand and double layered soils filled in a steel box of which the size is $5m{\times}1m{\times}1m$. Double-layered soils were composed of Joomunjin sand and Kaoline clay. Each thermal conductivity of Joomunjin sand and Kaloine clay was measured by using Heat Flow Meter considering different void ratio. The ground thermal conductivity of double-layered soils was 15% smaller than that of Joomunjin sand.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.17-26
• /
• 1996

This research was accomplished to evaluate possibility of using paper sludge for the raw materials of wood based panel products. The experimental panels were manufactured by four mixed ratios, the proportion of paper sludge to wood particle: 20:80, 30:70, 40:60, 50:50% (oven dry weight basis) and by three composition types, sludge-particle mixed board, three layered sludge-particle board and three layered particle board. They were tested mechanical (bending strength and internal bond) and physical properties (water absorption, thickness swelling and linear expansion). From the results they were shown that bending strength of mixed and three layered sludge-particle board were decreased with increasing of composition ratios of sludge. And the mechanical and physical properties of the boards of three layered composition types have superior to those of mixed composition type. Although composition ratios of sludge increased, the internal bond strength and dimensional stability of sludge-particle board not decreased quantitatively. We concluded that the mechanical and physical properties of three layered sludge-particle board were similar w those of three layered particle-board (control) made by our laboratory design. Therefore, it was recognized that paper sludge can be used as potential raw material in particle-board manufacturing industry.

• 한국정밀공학회지
• /
• 제31권3호
• /
• pp.269-275
• /
• 2014

Conventional machining technologies such as a milling process have limitations in accuracy to fabricate microstructures. Deep X-ray lithography using the synchrotron radiation is a promising micromachining process with an excellent accuracy, whereas there are difficulties in the fabrication of multi-layered structures. Therefore, it is mainly used for fabricating simple mono-layered microstructures with a high aspect ratio. In this study, a novel technology for fabricating multi-layered microstructures is proposed by combining two processes. In advance, an X-ray resist material is cut and machined into various shapes and heights by the micro milling process. Subsequent X-ray irradiation process facilitates the fabrication of multi-layered microstructures. The proposed technology can overcome the limitation of the pattern accuracy in conventional milling process and the difficulty of the multi-layered machining in x-ray process. The usefulness of the proposed technology is demonstrated in this study by applying the technique in the realization of various multi-layered microstructures.

• 한국의상디자인학회지
• /
• 제9권3호
• /
• pp.221-230
• /
• 2007

This research was focused on the changes of layered techniques in Hussein Chalayan's collections. For this purpose, the layered techniques in 134 works from Chalayan's collections, 97S/S to 06S/S, which were obtained from fashion magazines and fashion internet site, were analyzed and classified into 15 groups. Layered techniques in his works apparently expressed his philosophy about deconstruction. Multilayered feeling was given through using various techniques such as one layer clothing which was showed like multi-layered clothing. Others were multi-layer clothing which felt like one layer, breaking the stereotyped line of clothing into atypical construction and using various materials or constructive lines which made the optical feeling like one layer or multi-layer clothing, and so on. These layered techniques in Chalayan's collections were differentiated into several categories, such as techniques which were revealed in every collections, techniques which were differentiated from one another collections, techniques which were continuously showed through three collections for connection with each collection, techniques which were used only for Spring/Summer season, and techniques which were uniquely showed in early collection or recent collections.

• Earthquakes and Structures
• /
• 제24권1호
• /
• pp.65-79
• /
• 2023

A simplified analytical solution for seismic response of tunnel cross section in horizontally layered ground subjected to oblique incidence of SH wave is deduced in this paper. The proposed analytical solution consists of two main steps: free-field response in layered field and tunnel response. The free field responses of the layered ground are obtained by one-dimensional finite element method in time domain. The tunnel lining is treated as a thick-wall cylinder to calculate the tunnel response, which subject to free field stress. The analytical solutions are verified by comparing with the dynamic numerical results of two-dimensional ground-lining interaction analysis under earthquake in some common situations, which have a good agreement. Then, the appropriate range of the proposed analytical solution is analyzed, considering the height of the layered ground, the wavelength and incident angle of SH wave. Finally, by using the analytical solutions, the effects of the ground material, burial depth of the tunnel, and lining thickness and the slippage effect at the ground-lining interface on the seismic response of tunnels are investigated. The proposed solution could serve as a useful tool for seismic analysis and design of tunnels in layered ground.

• 암석학회지
• /
• 제16권3호
• /
• pp.162-179
• /
• 2007

영남(소백산)육괴의 남서부인 지리산지역의 북서부에 선캠브리아 편마암 복합체를 트라이아스기(약 223 Ma)에 관입한 마천층상관입암은 크게 층상계열과 엽상계열의 두 그룹으로 구분되는 고철질-초고철질 암석들로 구성되어 있으며, 마그마혼합의 특성을 잘 보이는 암맥상의 고철질 암이 수반된다. 층상계열은 누적조직의 특성과 주구성 유색광물의 종류에 의해 중앙부의 감람석 반려암대(하부대)와 주변부의 각섬석 반려암대(중 내지 상부대피 두 부분으로 다시 세분된다. 중앙부의 감람석 반려암은 비교적 얇은 우흑질과 우백질의 층들이 규칙적으로 교호된 중립질 반려암질 암과 균질하고 두꺼운 층상구조를 이룬 조립질 반려암질 암들이 서로 협재되어 있으며, 주구성 암종은 우흑질 반려암, 트록토라이트, 우백질 트록토라이트, 사장암질암 등으로 감람석과 사장석이 주구성 광물이다. 엽상계열은 함석영 흑운모휘석 반려암과 보다 분화된 특성의 각섬석 섬록암으로 분류되며 간극상로 산출되는 소량의 석영과 미사장석을 포함하고 있다 주변의 선캠브리아 편마암류와의 접촉대에 냉각대가 발달되어 있어 심부에서 보다 분화된 동원성 마그마가 어느 정도 시간적인 간격을 갖고 좀 더 냉각된 환경에서 관입한 것으로 보인다. 층상계열에 발달된 층상구조는 감람석은 주로 정누적구조 내지 부가누적구조, 사장석은 부가누적 내지 간극누적구조를 보이며, 단사휘석과 각섬석은 간극누적 내지 이형부가누적조직을 이루고 있다. 층상암들에서 마그마작용동안 생성된 습곡구조, 점이층리, 사층리 등이 드물지 않게 산출된다. 마천층상관입암체에 발달된 층상구조와 엽상구조가 주로 중력침전과 제자리 결정작용에 의해 생성되었으며 슬럼핑과 밀도류 흐름작용도 상당한 역할을 하였을 것으로 해석된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1539-1542
• /
• 2007

We have synthesized novel organic passivation materials to protect organic thin film transistors (OTFTs) from $H_2O$ and $O_2$ using polyvinyl alcohol (PVA)/layered silicate (SWN) nano composite system. Up to 3 wt% of layered silicate to PVA, very homogeneous nanocomposite solution was prepared.