• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2015

To evaluate accuracy and precision of determination of total alkalinity ($Alk_T$) and carbon dioxide ($TCO_2$) derived from present study, experiment was applied with $CO_2$ CRM (Batch 132, Scripps Institution of Oceanography; $Alk_T=2229.24{\pm}0.39{\mu}mol/kg$, $TCO_2=2032.65{\pm}0.45{\mu}mol/kg$). As the result, average concentration of $Alk_T$ and $TCO_2$ was $2354.09{\mu}mol/kg$ (~5.6% difference with $CO_2$ CRM) and $2089.60{\mu}mol/kg$ (~2.3% difference with $CO_2$ CRM), respectively. For previous method (Gran Titration) by addition $NaHCO_3$ to deionized water($Alk_T$ $2023.33{\mu}mol/kg$), average concentration was $2193.39{\mu}mol/kg$ (sd=57.15, n=7). Whereas, average concentration was $2017.02{\mu}mol/kg$ (sd=10.98, n=7) for the present study. Recovery yield experiments of total alkalinity in deionized water and seawater were implemented by addition of $NaHCO_3$. The recovery yield of deionized water in the range 0 to $4952.39{\mu}mol/kg$ was 100.8% ($R^2$=0.999), and seawater in the range 0 to $2041.32{\mu}mol/kg$ was 102.3% ($R^2$=0.999). Comparison of $pCO_2$ sensor (PSI $CO_2-Pro^{TM}$) with present method showed very meaningful correlation coefficient ($R^2$=0.977) in the range of 427 to $705{\mu}atm$ and 9.16 to $15.24{\mu}mol/kg$ throught elapsed time for two weeks. Field experiment of diurnal variation of total carbon dioxide was accomplished at Sachon harbor in the coastal waters of East Sea of Korea. Concentration of $Alk_T$ and $TCO_2$ was increased during night, and decreased during daylight hours. The results showed mirror type between $TCO_2$ and dissolved oxygen, which was attributable to photosynthesis and respiration of phytoplankton. Also, open ocean field study was performed to obtain vertical profile of $Alk_T$ and $TCO_2$ in C-C zone (Clarion-Clipperton Fracture Zone), Northeastern Pacific. Average concentrations of $Alk_T$ in the surface mixed layer (0~60 m) and deeper layer below 200 m were $2422.38{\mu}mol/kg$ (sd=78.73, n=20) and $2465.87{\mu}mol/kg$ (sd=57.68, n=103), respectively. And average concentrations of $TCO_2$ were $2134.47{\mu}mol/kg$ (sd=65.4, n=20) and $2431.87{\mu}mol/kg$ (sd=65.02, n=103) in the same depth ranges such as $Alk_T$. Vertical distributions of $Alk_T$ and $TCO_2$ concentrations tended to increase with depth, and analyzed concentrations showed slightly higher than those of previous studies in this area.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.225-233
• /
• 2020

By the standards and specifications for hygiene products, three test methods for formaldehyde are specified for each item type of hygiene product. After derivatization using acetylacetone and 2,4-dinitrophenylhydrazine (2,4-DNPH), formaldehyde is analyzed by spectrophotometer and high-performance liquid chromatography (HPLC). Validation of the three test methods was performed on tissue, diaper lining and waterproof layer, and panty liner products. The results of linearity (R²), limit of detection (LOD), limit of quantification (LOQ), recovery rate (%) and reproducibility (%), showed that all three methods are suitable for analyzing formaldehyde in hygiene products. After derivatization with 2,4-DNPH and cetylacetone, formaldehyde was analyzed at 0, 3, 6, 9, 24 and 48 hours by HPLC. Formaldehyde derivatized with 2,4-DNPH showed no statistically significant change in formaldehyde peak area over time (P>0.05). But, acetylacetone-derivatizated formaldehyde showed a negative correlation coefficient (r) over time (P<0.01). We investigated the residual amounts of formaldehyde in 205 hygiene products distributed in Busan. Among 74 disposable diaper products tested, 73 had low concentrations of formaldehyde (0.13-29.87 mg/kg). Moreover, formaldehyde was not detected in any of 78 tissue, 27 disposable paper towel, 12 disposable dishcloth, 7 paper cup, one brand of paper straw and 6 disposable napkin products.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.2
• /
• pp.171-177
• /
• 1982

Optical properties of sea water were studied in the western channel of the Korea Strait, based on the data obtained from fifteen oceanographic stations in July, 1980. Submarine daylight intensity was measured at intervals of 5m depth in the upper 70m layer by using the underwater irradiameter (Kahlsico $\#268_{WA}360$). The mean absorption coefficients of the sea water were shown as $0.098(0.063\sim0.183),\;0.129(0.090\sim0.270), 0.081(0.044\sim0.142),\;and 0.087(0.036\sim0,142)$ for clear, red, green, and blue color respectively. The transparency ranged from 11.5 to 24m(mean 18.3m). The mean water color in this area was $3.5(3\sim4)$ in Forel scales. The relation between absorption coefficient $(\kappa)$ and transparency (D) was $\kappa=1.72/D,\;\kappa=2.33/D,\;\kappa=1.41/D,\;and \kappa=1.44/D$ for clear, red, green, and blue color respectively. The rates of light penetration for clear, red, green, and blue color in four different depths were computed with reference to the surface light intensity respectively. The mean rates of light penetration in proportion to depths were as follows; clear : $57.90\% (5m),\;23.40\%\;(15m),\;6.23\%\;(30m),\;1.00\%\;(50m).$ $red\;:\;48.95\%\;(5m),\;14,81\%\;(15m),\;2.76\%\;(30m),\;0.28\%\;(50m).$ $green:\;63.20\%\;(5m),\;30.47\%\;(15m),\;10.03\%\;(30m),\;2.24\%\;(50m).$ $blue\;:\;62.70\%\;(5m),\;30.00\%\;(15m),\;9.75\%\;(30m),\;1.70\%\;(50m)$

• Journal of the Korean earth science society
• /
• v.35 no.1
• /
• pp.1-18
• /
• 2014

The purpose of this study was to analyze the sensitivity of meteorological fields and the variation of concentration of particulate matters (PMs) due to aerosol schemes and dust options within the WRF-Chem model to estimate Asian dusts affected on 29 May 2008 in the Korean peninsula. The anthropogenic emissions within the model were adopted by the $0.5^{\circ}{\pm}0.5^{\circ}$ RETRO of the global emissions, and the photolysis option was by Fast-J photolysis. Also, three scenarios such as the RADM2 chemical mechanism and MADE/SORGAM aerosol, the MOSAIC 8 section aerosol, and the GOCART dust erosion were simulated for calculating Asian dust emissions. As a result, the scenario of the RADM2 chemical mechanism & MADE/SORGAM aerosol depicted higher concentration than the others' in both Asian dusts and the background concentration of PMs. By comparing of the daily mean of PM10 measured at each air quality monitoring site in Seoul with the scenario results, the correlation coefficient was 0.67, and the root mean square error was $44{\mu}gm^{-3}$. In addition, the air temperature, the wind speed, the planetary boundary layer height, and the outgoing long-wave radiation were simulated under conditions of no chemical option with these three scenarios within the WRF or WRF-Chem model. Both the spatial distributions of the PBL height and the wind speed of u component among the meteorological factors were similar to those of the Asia dusts in range of 1,800-3,000 m and $2-16ms^{-1}$, respectively. And, it was shown that both scenarios of the RADM2 chemical mechanism and MADE/SORGAM aerosol and the GOCART dust erosion were interacted on-line between meteorological factors and Asian dusts or aerosols within the model because the outgoing long-wave radiation was changed to lower than the others.

• Korean Journal of Remote Sensing
• /
• v.32 no.2
• /
• pp.119-131
• /
• 2016

Descriptions are provided of the automated aerosol-type classification and mass concentration calculation algorithm for real-time data processing and aerosol products in Korea Aerosol Lidar Observation Network (KALION, http://www.kalion.kr). The KALION algorithm provides aerosol-cloud classification and three aerosol types (clean continental, dust, and polluted continental/urban pollution aerosols). It also generates vertically resolved distributions of aerosol extinction coefficient and mass concentration. An extinction-to-backscatter ratio (lidar ratio) of 63.31 sr and aerosol mass extinction efficiency of $3.36m^2g^{-1}$ ($1.39m^2g^{-1}$ for dust), determined from co-located sky radiometer and $PM_{10}$ mass concentration measurements in Seoul from June 2006 to December 2015, are deployed in the algorithm. To assess the robustness of the algorithm, we investigate the pollution and dust events in Seoul on 28-30 March, 2015. The aerosol-type identification, especially for dust particles, is agreed with the official Asian dust report by Korean Meteorological Administration. The lidar-derived mass concentrations also well match with $PM_{10}$ mass concentrations. Mean bias difference between $PM_{10}$ and lidar-derived mass concentrations estimated from June 2006 to December 2015 in Seoul is about $3{\mu}g\;m^{-3}$. Lidar ratio and aerosol mass extinction efficiency for each aerosol types will be developed and implemented into the KALION algorithm. More products, such as ice and water-droplet cloud discrimination, cloud base height, and boundary layer height will be produced by the KALION algorithm.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.357-370
• /
• 1982

Recent concern regarding price and availability of fossil fuels has spurred the interest in alternative sources for farm crop drying. Among the available options such as biomass energy, wind power, nuclear energy and solar energy etc., the increasing attention is being directed to the utilization of heat from solar energy especially for farm crop drying. Even though solar energy is dispersed over a large land area and only a relatively small amount of energy can be simply collected, the advantages of solar energy is that the energy is free, non-polluting. The study reported here was designed to help supply the informations for the development of simple and relatively inexpensive solar warehouse for farm crop drying and storage. Specifically, the objectives of this study were to determine the performance of the solar collector fabricated, to compare solar supplemented heat drying with natural air drying and to develop a simulation model of temperature in stored grain, which can be used to study the effects due to changes in ambient air temperature. For those above objectives, solar collector was fabricated from available materials. Corrugated steel galvanized sheet, painted flat black, was used as absorbers and clear 0.2mm polyethylene sheet was the cover material. The warehouse for rough rice drying and storage was constructed with concrete block, and the solar collector was used as the roof of warehouse instead of original roofing system of it. The results obtained in this study were as follows: 1. The thermal efficiency of the solar collector was average 26 percent and the overall heat transfer coefficient of the collector was approximately $25kJ/hr.m^2\;^{\circ}K$. 2. Solar heated air was sufficient to dry one cubic meter of rough rice from 23.5 to 15.0 percent in 7 days and natural air was able to dry the same amount of rough rice from 20.0 to 5 percent in l2 days. 3. Drying with solar heat reduced the required drying time to dry the same amount of rough rice into a half compared to natural air drying, but overdrying problems of the bottom layer were so severe that these problems should be thoroughly analyzed. 4. Simulation model of temperature in stored grain was developed and the results of predicted temperature agreed well with test results. 5. Based on those simulated temperature, changes in the grain-temperature were a large at the points of the wallside and the damage of the grain would be severe at the contact area of wall.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.500-510
• /
• 2008

Statement of problem: Recently researches about WC/C (Tungsten Carbide/Carbon) or TiN (Titanium Nitride) coating on abutment screws are going on. It decreases friction coefficient, resistance against corrosion and withdrawal of physical fragility when the coating is applied to the metal surfaces. It is reported that coated abutment screws improved abrasion, adaptability and detorque force. Purpose: This study is about the effects of coated abutment screws on loosening of screw and for the purpose of solving the loosening phenomenon of abutment screws which is clinical problem. Material and methods: Detorque force and surface changes are compared when 10 times of repeated closing and opening are applied to both uncoated titanium abutment screws (Group A) and coated abutment screws with WC/C (Group B) and TiN (Group C). Each group was made up of 10 abutment screws. Results: 1. Before repeated closing and opening, Somewhat rough surface with regular direction was observed in Group A. Coated granules were observed in group B and group C and overall coated layer appeared in regular and smooth form. 2. Before repeated closing and opening, The coated surface showed bigger and thicker size of coated granules in Group C than Group B. 3. After repeated closing and opening, abrasion and deformation of abutment screw surface was observed in Group A and Group B. Exfoliation phenomenon was observed in Group B. 4. Group A showed biggest range of decrease when the weight changes of abutment screws were measured before and after repeated closing and opening. Group C showed less weight changes than Group B but there was no statistical difference between two groups. 5. Group B and Group C showed higher average detorque force than Group A and there was statistical difference. 6. Group A showed more prominent decrease tendency of average detorque force than Group B and Group C. Conclusion: Coated abutment screws with WC/C or TiN did not show prominent surface changes than uncoated titanium abutment screws even though they were repeatedly used. And they showed excellent resistance against friction and high detorque force. Thus it is considered that adaptation of WC/C or TiN coating on abutment screws will improve the screw loosening problem.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.5
• /
• pp.266-280
• /
• 1989

Gonadal maturation of the Korean pomfrets, Pampus echinogaster (Basilewsky) and Pampus argenteus (Euphrasen) were histologically investigated based on the samples captured in the East China Sea from January 1987 to December 1988. Gonadosomatic index (GSI) of P. echinogaster began to increase from March, and reached maximum between May and July. It began to decrease from July and reached mini-mum between August and February. P. argenteus had a similar cycle, however, P. argenteus has higher values in April than P. echinogaster. Hepatosomatic index (HSI) were positively related to GSI. HIS of P. echinogaster and P. argenteus reached maximum in $April\~July$ and $April\~August$, respectively, Fatness coefficient of two Pampus species were low in the summer, and high in the winter. Ovary is of saccular structure, and testis is of lobular structure. From February, the early oocyte (ca. $100\mu$ in diameter grows) rapidly at the germinal epithelium of ovarian sacs. From March to April the oocytes grew up to cu $400\~500\mu$ in diameter. At this stage, the yolk globules are accumulated rapidly in the cytoplasmic layer. From May, the oocytes roached ca. $650\~850\mu$ in diameter, and they are spawned in $May\~July$. After spawning the residual follicles and remained ripe eggs degenerate. From February, spermatogonia grows into spermatocyte on the epithelium of the testicular lobuli. From May, spermatozoa appeared and spawning occurs. After spawning, the epithelium is thickened and the remained spermatozoa degenerate. Annual reproductive cycle of two Pampus species could be divided into four successive stages: Growing stage ($March\~April$), Mature stage ($April\~May$), Ripe and spent stage ($June\~July$) and Recovery and resting stage ($August\~January$). Absolute fecundity of P. echinogaster was $9,441\~135,294$, and that of P. argenteus was $50,678\~221,894$. Absolute fecundity of two Pampus species were positively related to body length and total weight. Relative fecundity was positively related to body length, while it was reversely related to total weight. The increasing rate of absolute fecundity of P. echinogaster was lower than P. argenteus. In P. echinogaster half of female and male reached first maturity at body length of $15.0\~$17.9cm and $12.0\~14.9cm$, respectively. All of females and males reached first maturity at body length of $18.0\~20.9cm$ and $21.0\~23.9cm, respectively. In P. argenteus all of females and males reached first maturity at body length of 18.6cm and 16.7cm$, respectively.

• Korean Journal of Environmental Biology
• /
• v.25 no.4
• /
• pp.303-312
• /
• 2007

In order to investigate the dynamics of phytoplankton standing crops affecting by environmental factors, biological and environmental factors, this study was examined in the marine ranching ground of Tongyeong coastal waters from 2000 to 2007. During the study, mean water temperature and salinity were 16.7$^{\circ}C$ and 32.9 psu, respectively. pH, DO and SS varied from 7.81$\sim$8.09, 3.02$\sim$8.97 mg $L^{-1}$ and 2.7$\sim$32.2 mg $L^{-1}$, respectively. Mean concentrations of dissolved inorganic nitrogen, phosphate and silicate were 21.75 ${\mu}M$, 0.90 ${\mu}M$ and 14.38 ${\mu}M$, respectively. Chlorophyll a concentrations varied from 0.02 ${\mu}g$ $L^{-1}$ to 25.29 ${\mu}g$ $L^{-1}$ with mean a value of 2.0 ${\mu}g$ $L^{-1}$. These factors did show significant differences on each layer and season, while did not show on the sampling stations. Phytoplankton standing crops varied from $4.21\times10^3$ cells $L^{-1}$ to $1.44\times10^6$ cells $L^{-1}$ with a mean value of $1.92\times10^5$ cells $L^{-1}$. Especially, variations of phytoplankton standing crops had an unimodal pattern as only bloomed in autumn rather than a bimodal pattern as generally bloomed in spring and autumn. In results of stepwise multiple regression analysis, the coefficient of determination $(R^2)$ for total standing crops was 0.35 and the standing crops were affected by water temperature, salinity, phosphate and silicate. The factors affected were different seasonally; water temperature in spring, salinity in summer, water temperature, salinity and silicate in autumn and water temperature, salinity and suspended solids in winter. Therefore, the results from the statistical analysis showed that the environmental factors influencing on the variations of the phytoplankton standing crops were predominantly water temperature and salinity.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1078-1086
• /
• 1996

The peroxo-polytungstic acid was formed by the direct reaction of tungsten powder with the hydrogen peroxide solution. Peroxo-polytungstic powder were prepared by rotary evaporator using the fabricated on to ITO coated glass as substrate by dip-coating method using $2g/10mL(W-IPA/H_2O)$ sol solution. A substrate was dipped into the sol solution and after a meniscus had settled, the substrate was withdrawn at a constant rate of the 3mm/sec. Thicker layer could be built up by repeated dipping/post-treatment 15 times cycles. The layers dried at the temperature of $65{\sim}70^{\circ}C$ during the withdrawn process, and then tungsten oxides thin film was formed by final heating treatment at the temperature of $230{\sim}240^{\circ}C$ for 30min. A linear rotation between the thickness of thin film and the number of dipping/post-treatment cycles for tungsten oxides thin films made by dip-coating was found. The thickness of thin film had $60{\AA}$ after one dipping. From the patterns of XRD, the structure of tungsten oxides thin film identified as amorphous one and from the photographs of SEM, the defects and the moderate cracks were observed on the tungsten oxides thin film, but the homogeneous surface of thin films were mostly appeared. The electrochemical characteristic of the $ITO/WO_3$ thin film electrode were confirmed by the cyclic voltammetry and the cathodic Tafel polaization method. The coloring bleaching processes were clearly repeated up to several hundreds cycles by multiple cyclic voltammetry, but the dissolved phenomenon of thin film revealed in $H_2SO_4$ solution was observed due to the decrease of the current densities. The diffusion coefficient was calculated from irreversible Randles-Sevick equation from the data obtained by the cyclic voltammetry with various scan rates.