• 제목/요약/키워드: Layer Defense

검색결과 253건 처리시간 0.025초

항공우주용 리오셀계 탄소/페놀릭 복합재료의 내열 성능 평가 (Evaluation of Heat Resistance of Lyocell-based Carbon/Phenolic for Aerospace)

  • 서상규;김연철;배지열;함희철;황태경
    • 한국항공우주학회지
    • /
    • 제49권5호
    • /
    • pp.355-363
    • /
    • 2021
  • 리오셀계 탄소/페놀릭 복합재료의 항공우주용 내열 부품 적용 가능성을 확인하기 위하여 내열성능 평가 및 열 해석을 수행하였다. 탄소/페놀릭의 열반응 평가는 내열성능평가모터(Thermal Protection Evaluation Motor, TPEM)로 수행되었다. 본 논문에서는 열 해석을 위해 유체의 경계층 해석을 고려한 경계층 적분 코드와 삭마 및 열분해를 고려한 MSC-Marc 2018 코드를 사용하였다. 추진기관의 압력 곡선, 연소 시험 후 절개된 목삽입재 시편을 통하여 삭마 및 단열성능을 분석하였고, 리오셀계 탄소/페놀릭 복합재료의 열반응은 레이온계 탄소/페놀릭 재료와 유사하였다. 연소시험을 통한 결과를 바탕으로 국산 리오셀계 탄소/페놀릭의 항공우주용 내열 부품으로의 적용 가능성을 확인하였다.

동시 경화 제작기법을 적용한 이종 수지 복합재의 열적/기계적 특성에 관한 실험적 연구 (Experimental Study on Thermal and Mechanical Characteristics of Two Resin Composites Using the Co-Curing Process)

  • 윤진영;최지덕;박철용;김영규
    • 한국군사과학기술학회지
    • /
    • 제23권5호
    • /
    • pp.475-484
    • /
    • 2020
  • Individual curing process of each layer in two resin composites can be caused the separation between two layers. In this study, co-curing process for two resin composites is suggested to improve the inter-layer bonding. Glass fiber reinforced composites with phenolic and epoxy resins were manufactured by co-curing process, and several types of glass/phenolic composites were considered to confirm the application on two resin composites. Experiments for smoke resistance, scratch resistance and flexural strength were carried out to verify requirements corresponding to thermal and mechanical environments. It was validated that two resin composites with phenolic resin impregnated prepreg exhibits good thermal and mechanical characteristics, and it can serve as highly effective composite structures in aerospace and many industry areas.

수리모형을 이용한 요격확률 및 비용 기반의 다층 방어 요격미사일 운용방법 연구 (A Study on Intercept Probability and Cost based Multi-layer Defense Interceptor Operating Method using Mathematical Model)

  • 서민수;마정목
    • 한국시뮬레이션학회논문지
    • /
    • 제29권2호
    • /
    • pp.49-61
    • /
    • 2020
  • 탄도미사일 위협에 대응하기 위해 제한된 수량의 요격미사일을 효율적으로 운용하는 것은 중요하다. 기존 요격미사일 운용방법은 방호목표에 적용하는 교전효과수준에 따라 요격미사일 수를 결정한다. 이는 요격확률에 비해 과도한 요격미사일 소모 또는 요격확률 감소를 초래할 수 있다. 따라서 탄도미사일 수와 요격확률 및 비용을 고려하여 요격미사일 운용방법을 결정해야한다. 본 연구는 요격미사일 운용방법을 개선하기 위한 수리모형을 제안한다. 또한, 요격확률과 비용의 절충을 위해 효율성 지표를 제시하였다. 시뮬레이션 결과 수리모형 기반 요격미사일 운용방법이 기존 요격미사일 운용방법에 비해 우수한 결과를 달성할 수 있었다.

전단농화유체 함침 다층직물의 방탄성능 및 거동 수치해석 (Numerical Analysis of the Ballistic Performance and Behavior of STF-Impregnated Multi-layer Fabrics)

  • 문상호;손권중;조희근;박종규;정의경;이만영;김시조
    • 한국군사과학기술학회지
    • /
    • 제19권3호
    • /
    • pp.330-338
    • /
    • 2016
  • Impregnation of shear-thickening fluid(STF) into high-strength fabrics makes a considerable improvement on the ballistic performance of fabric armors. Understanding dissipation augmentation due to shear thickening effects on yarn-yarn and yarn-projectile friction is of great importance in liquid armor research. This paper takes a shearthickening effect into account in numerical simulations by using a velocity-dependent friction model. Impact simulations were performed to validate the friction model as well as to evaluate the ballistic performance of STF-fabrics. Impact simulations on neat fabrics were also conducted to provide baseline results for comparison.

민.군 협력에 의한 중.장기 국방 표준화 로드맵 개발에 관한 연구 (A Study on Development of Mid and Long-term Roadmap of National Defense Standardization by the Commercial and Military Collaboration)

  • 박일광;공명복;성인철
    • 산업공학
    • /
    • 제22권3호
    • /
    • pp.287-301
    • /
    • 2009
  • The purpose of this study is to develop a mid and long-term roadmap for "Commercial and Military Collaboration Standardization(CMCS) program." We developed three layer's roadmap through systematical process. The roadmap is composed of four targets, eight projects and forty-six tasks. To evaluate the quality of the roadmap, we applied checklist method and statistical analysis. Consequently, the quality is positive and it shows that the roadmap could apply for CMCS program. In addition, it is expected to contribute to the standardization between military supplies and commercial products.

Analysis Method of Transmission Characterization for Multi-layered Composite Material Based on Homogenization Method

  • Hyun, Se-Young;Song, Yong-Ha;Jeoun, Young-Mi;Kim, Bong-Gyu
    • 항공우주시스템공학회지
    • /
    • 제15권6호
    • /
    • pp.59-65
    • /
    • 2021
  • In this paper, the transmission characteristics of the multi-layered composite material with wire mesh and honeycomb core for aircraft applications have been analyzed with the proposed method. The proposed method converts the conductive wire mesh into effective layer, while for the dielectric honeycomb core, effective permittivity has been derived based on volume fraction with the proposed method. The proposed method has been verified through comparison with full-wave simulation and revealed excellent. In addition, the calculation time of the proposed method is a few order of magnitude faster in comparison with the full-wave simulation.

다단계 방어기법을 활용한 DDoS 방어시스템 설계 (The Design of Anti-DDoS System using Defense on Depth)

  • 서진원;곽진
    • 정보보호학회논문지
    • /
    • 제22권3호
    • /
    • pp.679-689
    • /
    • 2012
  • 2009년 7.7 DDoS 공격은 기존 DDoS공격과는 달리 감염 PC별로 적은 용량의 패킷 전송으로 웹페이지를 마비시켰으며, 또한 HTTP Flooding이라는 공격기법을 활용하여 공격을 성공한 사례였다. DDoS 공격은 시스템을 손상시키는 것이 아니라 일시적으로 서비스의 가용성을 해치는 것이므로, 효과적인 방어를 위해서는 공격자의 공격보다 높은 가용성을 확보하거나, 정확한 방어전략을 실행하여 서비스 시스템의 가용성을 확보하는 방법 등이 있다. 본 논문에서는 기존의 가용량 증설을 통한 방어기법과 달리, DDoS 공격의 특성에 기반하여 공격을 차단하여 서비스 시스템의 가용성을 확보하는 다단계 방어기법을 활용한 웹사이트 전용 DDoS 방어시스템 구축 방안을 제안한다.

미세파편 및 입자를 활용한 극초음속 비행체 요격 연구 (A Study on the Interception using Fine Fragments and Particles to Hypersonic Vehicles)

  • 김인수;강봉주;김성표;윤종원;김성훈
    • 한국군사과학기술학회지
    • /
    • 제27권2호
    • /
    • pp.285-293
    • /
    • 2024
  • This paper describes the interception using fine fragments and particles to hypersonic vehicles which have a vulnerability in thermal and pressure during glide-phase flight. This interception concept is based on the fast relative velocity and the flight vulnerability of hypersonic vehicles. For the density calculation of fragmentation and particle in interception, error analysis of end-phase was performed including radar, intercept missile and target maneuvering errors. In relation to the vulnerability and error analysis, the penetration characteristics of fine fragments in high temperature were analyzed. Presented the interception in glide-phase could be applied to the concept of horizontal multi-layer defense to hypersonic vehicles.

계층적 방어를 위한 침입탐지 시스템 설계 (Design of an Intrusion Detection System for Defense in Depth)

  • 구민정;한우철;장영현
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2010년도 제42차 하계학술발표논문집 18권2호
    • /
    • pp.525-526
    • /
    • 2010
  • 2000년 대규모 DDoS 공격이래, 2009년 7월 7일 국가주요정부기관 및 인터넷 포털, 금융권 등의 웹사이트 대상으로 1차, 2차, 3차로 나누어 대규모 사이버 공격이 발생하였다. 지속적으로 발전되는 행태를 보이고 DDoS 공격에 대해 본 논문에서는 계층적인 침입탐지시스템을 설계하였다. 네트워크 패킷을 분석하기 위해 e-Watch, NetworkMiner등의 패킷, 프로토콜 분석도구를 이용하여 TCP/IP의 Layer별 공격을 분석한 후 패킷의 유입량, 로그정보, 접속정보, Port, Address 정보를 분석하고 계층침입에 대한 방어를 수행하도록 설계하였다. 본 논문은 DDoS(Distributed Denial of Service)에 대한 패킷 전송에 대해 계층적인 방어를 통해 보다 안정적인 패킷수신이 이루어진다.

  • PDF

Layer별 Scanning을 사용한 취약성 분석 방법 (Method of Vulnerability Analysis from Layer Scanning)

  • 천우성;박대우
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 춘계학술대회
    • /
    • pp.277-280
    • /
    • 2010
  • 네트워크에서 OSI 7 Layer를 기반으로 통신 프로토콜이 구현되고 있고, 인터넷은 TCP/IP Layer를 중심으로 취약성이 발견되고 공격을 당하고 있다. 본 논문은 Scanning 프로그램들을 사용하여 네트워크에 Layer별로 Scanning을 실시하고 그에 따른 취약성을 각 Layer별로 분석한다. 각 Layer별 취약점과 Scanning 프로그램에서 분석 결과들에 대한 차이점을 분석 연구한다. 분석된 결과들에 대한 Scanning 프로그램에 대한 특성을 반영한 Scanning방법에 대한 특장점을 연구하고, 각 Layer별로 보안 대응 방안을 제시한다. 본 연구의 결과는 해커의 공격에 대한 취약성을 분석과 방어를 위한 보안정책 수립에 대한 자료로 활용되어 네트워크의 보안을 강화하는데 기여 할 것이다.

  • PDF