• Journal of Welding and Joining
• /
• 제12권4호
• /
• pp.141-150
• /
• 1994

The residual stress is inevitably introduced into composites because of the mismatch of the coefficient of thermal expansion, and it is different in each phase. The X-ray technique can detect separately the stress in each phase, so will wield useful information for analyzing the toughening mechanisms of composites. In order to apply the law of mixture to alloy steels with composite microstructures, two phase stainless steel, consisted of ferrite (.alpha.-Fe) and austenite (.gamma.-Fe) structures, was selected. The tensile elastic deformation was loaded, and then the X-ray diffraction technique was used to measure the X-ray elastic constants, the X-ray stress constants and the phase stresses. The law of mixture was investigated and the separation of macrostress and microstress was carried out. The phase stresses (the residual stresses of phase) in each phase, which were measured by X-ray technique, was directly proportional to the applied stress. The macrostress calculated from the phase stresses by using the law of mixture was nearly equal to the applied stress.

• 응용통계연구
• /
• 제26권5호
• /
• pp.821-834
• /
• 2013

Law 등 (2004)은 군집분석에서 변수선택을 위해 정규분포기반 "두각 혼합모형(salient mixture model)"의 사용을 제안하였다. 본 논문에서는 이 모형의 적합 상의 문제점과 변수선택의 결함을 지적하고 그 대안을 제시한다. 모의자료와 실자료를 바탕으로 제안된 방법이 기존의 방법보다 유용함을 보였다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.131-140
• /
• 2012

In this study, using the governing equation for thermohydrodyamic lubrication involving the homogeneous mixture of incompressible fluid derived by based on the principle of continuum mechanics, it is discussed the effects of water within engine oil on the performance of high speed journal bearing of a turbocharger. The governing equations are the general equations being able to be applied on the mixture of Newtonian fluid and non- Newtonian fluid. Here, the fluid viscosity index, n of power-law non-Newtonian fluid is supposed to be 1 for the application of the journal bearing in a turbocharger lubricated with the mixture of two Newtonian fluid, for example, water within engine oil. The results related with the bearing performance are shown that the bearing friction is to decrease and the side leakage and bearing load increase as increasing the water content in an engine oil.

• Tribology and Lubricants
• /
• 제27권4호
• /
• pp.183-192
• /
• 2011

In this study, using the governing equations for thermohydrodyamic lubrication involving the homogeneous mixture of incompressible fluid derived by based on the principle of continuum mechanics, it is discussed the effects of water dispersed within engine oil on the performance of high speed journal bearing of a turbocharger. The governing equations are the general equations being able to be applied on the mixture of Newtonian fluid and non-Newtonian fluid. Here, the fluid viscosity index, n of power-law non-Newtonian fluid is supposed to be 1 for the application of the journal bearing on a turbocharger lubricated with the mixture of two Newtonian fluids, water dispersed within engine oil. The results related with the bearing performance are showed that the friction force and bearing load capacity decrease as increasing the volume percent of water.

• Tribology and Lubricants
• /
• 제27권2호
• /
• pp.77-87
• /
• 2011

In this study, using the governing equation for thermohydrodyamic lubrication involving the homogeneous mixture of incompressible fluid derived by based on the principle of continuum mechanics, it is discussed the effects of water within turbine oil on the performance of high speed journal bearing of a steam turbine shipping engine. The governing equation is the general equation being able to be applied on the mixture of Newtonian fluid and non-Newtonian fluid. Here, the fluid viscosity index, n of power-law non-Newtonian fluid is supposed to be 1 for the application of the journal bearing in a steam turbine shipping engine lubricated with the mixture of two Newtonian fluid, for example, water within turbine oil. The results related with the bearing performance are showed.

• International Journal of Safety
• /
• 제9권2호
• /
• pp.6-10
• /
• 2010

The flash point of liquid solution is one of the most important flammability properties that used in hazard and risk assessments. Minimum flash point behaviour (MFPB) is showed when the flash point of a liquid mixture is below the flash points of the individual components. In this paper, the lower flash points for the flammable binary system, n-decane+n-octanol, were measured by Pensky-Martens closed cup tester. This binary mixture exhibited MFPB. The measured flash points were compared with the values calculated by the Raoult's law and the optimization method using van Laar and UNIQUAC equations. The optimization method were found to be better than those based on the Raoult's law, and successfully estimated MFPB. The opimization method based on the van Laar equation described the experimentally-derived data more effectively than was the case when the prediction model was based upon the UNIQUAC.

• 한국가스학회지
• /
• 제20권6호
• /
• pp.31-36
• /
• 2016

인화점은 액체 용액의 가장 중요한 인화성 지표 중 하나이다. 인화점은, 가연성 증기의 공기 속 농도가 점화가 발생하기에 충분할 때의 온도 중 가장 낮은 온도이다. 본 연구에서는 삼성분계 액체 용액인, n-nonane+n-decane+n-dodecane acid 계의 인화점을 Seta flash 밀폐식 장치를 사용하여 측정하였다. 실험값은 라울의 법칙을 활용한 방법과 실험식에 의한 계산값과 비교되었다. 그 결과 실험식에 의한 계산값이 라울의 법칙에 의한 계산값 보다 측정값을 잘 모사하였다.

• 한국수소및신에너지학회논문집
• /
• 제23권1호
• /
• pp.65-72
• /
• 2012

Rankine cycle using ammonia-water mixture as a working fluid has attracted much attention, since it may be a very useful device to extract power from low-temperature heat source. In this work, the thermodynamic performance of regenerative ammonia-water Rankine cycle is thoroughly investigated based on the second law of thermodynamics and exergy analysis, when the energy source is low-temperature heat source in the form of sensible energy. In analyzing the power cycle, several key system parameters such as ammonia mass concentration in the mixture and turbine inlet pressure are studied to examine their effects on the system performance including exergy destructions or anergies of system components, efficiencies based on the first and second laws of thermodynamics. The results show that as the ammonia concentration increases, exergy exhaust increases but exergy destruction at the heat exchanger increases. The second-law efficiency has an optimum value with respect to the ammonia concentration.

• 의료법학
• /
• 제7권2호
• /
• pp.331-364
• /
• 2006

Medical supplies have contradiction of efficacy and side effect to the various diseases together. Therefore, people have tried to reduce the side effects and also provide various methods to cope with any damages from the medicine quickly. In the case of accidents by medical supplies, the victim can be protected with advantage by the Product Liability Law rather than the Torts. The limit of Product Liability Law's application depends on whether medical supplies belong to the product or not. According to Product Liability Law, the product should be processed. Therefore, medical supplied should be processed to be the category of product. It can be said that the medical supplies in pharmacy, Chinese medicine, medical herbs, biological medicine manufactures, blood manufactured medicine, cord blood, hemopoietic progenitior cell and stem cell belongs to the manufactured products. The mixture by the prescription of doctor or preparation of pharmacist can be recognized as the product because prescription or preparation is a manufacturing act. Therefore, applying Product Liability Law to manufacturer, doctor or pharmacist would achieve the goal which is protecting the victims extensively.

• 한국가스학회지
• /
• 제22권2호
• /
• pp.52-58
• /
• 2018

가연성 액체 혼합물의 화재와 폭발의 위험성을 규정하는 가장 중요한 성질 중 하나는 인화점이다. 본 논문에서는 삼성분계 액체 혼합물인, n-nonane+n-decane+n-tridecane 계의 인화점을 Seta flash 밀폐식 장치를 사용하여 측정하였다. 실험값은 라울의 법칙을 이용한 방법과 다중회귀분석법에 의해 계산된 값들과 비교되었다. 라울의 법칙에 의한 계산된 결과의 절대평균오차는 $0.6^{\circ}C$이었다. 다중회귀분석법에 의해 계산된 결과의 절대평균 오차는 $0.4^{\circ}C$이었다. 절대평균오차에서 알 수 있듯이 다중회귀분석법에 의한 계산값이 라울의 법칙에 의한 계산값에 비해 측정값을 잘 모사하였다.