• 제목/요약/키워드: Laterals

검색결과 38건 처리시간 0.028초

하상여과 모형에서 수평집수관의 조도계수 (Roughness Coefficient of Collector Well Lateral in a Model Riverbed Filtration)

  • 김우철;김승현
    • 대한환경공학회지
    • /
    • 제29권2호
    • /
    • pp.176-183
    • /
    • 2007
  • 안 등이 보고한 모형 하상여과정의 수평집수관에 대한 여러 가지 측정치를 해석하기 위해 집수관에서의 흐름을 모사하는 수학적 모델을 개발하였다. 집수관 각 부위에서의 여과수 유입율 측정치와 본 연구에서 개발된 모델 예측치를 비교하였으며, 두 값은 잘 부합하였다. 이 모델을 이용하여 수평집수관 내부의 흐름에 대한 저항 즉, 조도계수를 구했고, 여러 실험조건에서 얻은 집수관의 조도 계수를 분석한 결과 집수정 유입유속이 커짐에 따라 조도계수는 증가하지만 정상적인 하상여과의 경우에는 0.012-0.015로 거의 일정함을 알 수 있었다. 또한, 집수관의 직경이 커지면 조도계수는 감소함을 알 수 있었다.

20대 후반 여성의 상반신 뒷면 형상에 따른 저고리 원형 개발 (Jeogori Pattern Development for Female in Late 20s According to Shape of Upper Back)

  • 엄란이;이예진
    • 한국생활과학회지
    • /
    • 제23권6호
    • /
    • pp.1191-1204
    • /
    • 2014
  • Even though a Han-bok, or traditional Korean costume, should be inherited since it is invaluable part of our culture, research on Han-bok is scarce. Since the development of a Jeogori pattern, the upper garment of Korean traditional clothes, is done mostly based on the chest size, the design does not completely consider on wearer's body shape. Moreover, unless made by an expert, trial and error is almost always necessary to improve the fit of the clothes. In this research, a Jeogori pattern was suggested that improves the fit based on the shape of the upper back(straight or bent) of a female in her late 20s who often wears a Han-bok and is comfortable when moving. Using a 3D virtual clothing system, the optimum pattern was selected based on the body shape. The final selection was made, and each subjects tried the garment on to evaluate the comfort when moving, along with its appearance, based on a seven point Likert scale. As a result, for a straight body shape, the optimum ease for the front bust width was 2.5cm, and that for the back bust width was 2.0cm. The optimum center back dart was 1.0cm. The optimum Geodae width was 7.6cm, and the optimum back Geodae point was 2.0cm. For the bent body shape, the optimum ease for the front and back bust was 2.0cm. The optimum Geodae width was 8.4cm, and the optimum back Geodae point was 1.5cm. Furthermore, if the Hwajang slope was set at half of the vertical distance between the laterals of the neck and shoulder, a fitted silhouette appeared, which is preferred nowadays. In the appearance evaluation, the final pattern designed in this research received higher scores than the original design(straight; p<.001, bent; p<.05). The results of the evaluation of the comfort when moving also showed higher scores for the final pattern that was designed.

한국산 홍조 참보라색우무(Symphyocladia latiuscula (Harvey) Yamada)의 형태와 생식 (Morphology and Reproduction of Symphyocladia latiuscula (Harvey) Yamada (Rhodophyta, Rhodomelaceae) in Korea)

  • 최도성
    • Journal of Plant Biology
    • /
    • 제34권1호
    • /
    • pp.59-66
    • /
    • 1991
  • 홍조 참보라색우무(Symphyocladia latiuscula (Harvey) Yamada)의 형태적 식별형질들을 야외 및 실내배양 재료를 통해 검토하고 생활사를 밝혔다. 본 종은 엽체의 체장이 5-15 cm이고, 정단을 제외한 전 엽체에 피층이 발달하며, 주축과 측지의 유합정도는 5-7 절편에 달한다는 점에서 Symphyocladia속의 다른 종들과 구분된다. 생식기관의 형태와 발달과정은 속내의 다른 종들과 구분된다. 생식기관의 형태와 발달과정은 속내의 다른 종들과 유사하나 소측지의 변형에 의해 장상의 사분포자탁을 형성하는 것이 특징적이다. 본 종은 야외 및 실내배양 재료 모두에서 영양모상엽이 형성되어 S. pennata와 구분되었고, 따라서 지금까지 polysiphonieae족과 Pterosiphonieae족을 구별하기 위한 기본 식별형질로서 인식되어 왔던 영양모상엽의 존재 유무는 부류학적인 의의가 없음을 확인되었다. 실내배양에서 본 종의 Polysiphonia형 생활사를 반복하나 배우체의 체장이 포자체보다 상재적으로 작아 세대간 크기의 차이가 현저한 이형현상이 관찰되었다. 본 종은 한국 전 해안의 조간대 중부 이하의 지역에서 전 계절에 걸쳐 흔히 채집되며, 하계에 배우체의 출현비율이 높았다.

  • PDF

수평위치 결정을 위한 망조정 해석에 관한 연구 (A Study on the Network Adjustment Analysis for Planimetric Positioning)

  • 유복모;조기성;이현직;곽동옥
    • 한국측량학회지
    • /
    • 제9권2호
    • /
    • pp.37-48
    • /
    • 1991
  • 본 연구에서는 단열망 형태와 유심조합망 형태를 고려하여 기존 망조정 방법 및 조합 망조정 방법에 의해 계산된 각 점의 평균제곱근 오차와 표준오차 타원을 계산하여 자 방법을 비교 분석하였다. 본 연구 결과로써 기존의 망조정 방법에서는 삼변측량, 다가측량, 삼각측량의 순으로,.조합 망조정 방법에서는 다변측량, 조합 다각측량, 삼각 삼변측량의 순으로 정확도가 좋게 나타났으며, 중요한 신설점을 추가할 경우 망의 형태는 단열망 형태보다 유심조합망 형태로 구성하여 잉여관측수를 증가시킴으로써 정확도를 향상시킬 수 있었다. 또한, 조합 다각측량의 경우, 관측 가능한 측선거리를 추가시킴으로써 삼변측량의 성과에 준하는 정확도를 얻을 수 있었고, 시통이 양호하고 넓은 지역에는 다변측량 방법이 효과적이며, 도시 지역과 같은 시통이 어려운 시가지에서는 조합다각 측량을 이용하는 것이 바람직하다고 사료되었다.

  • PDF

주방오물분쇄기 사용 및 수세분뇨의 직투입에 따른 「새로운 공공하수도 서비스」제공을 위한 투자사업의 비용과 편익 항목 식별 (Identifying Cost and Benefit Items of Investment Projects to Offer New Public Services By the Use of Food Waste Disposers and the Direct Input of Feces in Sewers)

  • 오현택;박규홍;김성태;임병인
    • 융합정보논문지
    • /
    • 제10권5호
    • /
    • pp.117-125
    • /
    • 2020
  • 본 연구에서는 정화조 폐기와 주방용오물분쇄기 사용으로 수세분뇨와 음식물찌꺼기가 공공하수관로에 직접 투입되는 「새로운 공공서비스사업」(이하 사업)시행과정에서 발생하는 비용과 편익을 식별, 제시한다. 본 연구는 기존 문헌과 공학적인 관점에서 사업시행 과정에서 처리분구(소구역)별 소요비용과 사업 완료 이후 편익을 객관적인 통계자료로서 식별, 제시하는 방식으로 수행한다. 비용과 편익을 식별한 결과, 비용항목들은 하수관로 시설(배수설비, 정화조 폐쇄·관로배치 변경 등), 수질보전(우수 토실·토구, 하수저류시설 등), 공공하수처리시설(침사지와 최초침전지, 고도처리시설 등) 등에서, 편익항목에는 악취제거로 인한 건강개선, 슬러지 처리효율 제고로 에너지 생산성 증가, 음식물쓰레기 처리비용과 정화조 처리 및 유지관리비용 절감, 기존 분뇨처리시설투자 축소 등이 식별되었다. 이상의 비용과 편익항목들은 향후 사업 시행 여부를 결정하는 경제성 분석의 기초 자료로 활용될 것이다.

송이다듬기가 포도 'Muscat Bailey A'의 품질과 양조적성에 미치는 영향 (Berry thinning effects on the fruit and wine quality of grape 'Muscat Bailey A')

  • 정성민;장은하;박서준;정석태;노정호;허윤영;이한찬
    • 한국식품저장유통학회지
    • /
    • 제17권5호
    • /
    • pp.625-630
    • /
    • 2010
  • 송이다듬기는 포도의 품질을 높이기 위해 송이의 크기를 조절하고 송이모양을 변형시키는 유용한 재배방법이다. 포도 'MBA' 품종의 송이다듬기에 따른 과실 및 포도주의 품질 특성을 확인하기 위해 송이줄기의 곁가지를 제거하였는데, 상위지경부터 4, 5, 6지경을 남기고 절단 한 뒤 관행처리 대조구와 비교하여 수확기에 과방 및 와인의 품질을 조사하였다. 포도송이의 품질은 지경수가 작을수록 당도가 증가하고 총산이 감소하는 양상을 나타내었다. 포도주의 양조특성에 있어서는 송이다듬기 처리가 대조구에 비해 총 안토시아닌, 총 폴리페놀, 탄닌과 같은 성분이 높아져 포도주의 품질이 향상되었으며, 기호성 평가에 있어서도 송이다듬기 처리가 대조구보다 더욱 높은 점수를 나타내었다.

흙 수로내에서의 용수손실에 관한 연구 (Research on the Loss of Irrigation Water Flowing in the Earth Channel)

  • 김철회
    • 한국농공학회지
    • /
    • 제14권3호
    • /
    • pp.2703-2715
    • /
    • 1972
  • 본 실험 연구는 흙수로내에서의 용수손실에 관한 연구로서 물을 필요로 하는 논과 밭까지 필요한 시기에 필요한 양만큼을 보급해 주어야 하는 관개계획을 수립함에 있어 매년 높아져 가는 사수위에 늘어가는 필요 수량과의 함수관계를 해결하는 지표를 주는데 목표을 두었다. 시험은 용수계통인 간선, 지선, 분선수로로 구분하여 간선수로에서는 1,000m 구간을 잡아 유속계측정 방법으로 지선수로에서는 500m 구간을 잡아 상 하류에 파야샬후륨을 설치하여 측정하였으며 분선수로에서는 200m 구간을 상 하류에 사각예언웨어를 설치하여 손실을 측정하였으며 기타손실에 영향을 주는 제요인들도 조사하여 다음 결과를 얻었다. (1) 1,000m 구간의 간선수로에서는 9.64%의 통수손실을 보였으며, 500m 구간의 지선수로에서는 15.55%. 200m 구간의 분선수로에서는 12.34%의 통수손실율을 보였다. (2) 삼투량조사는 지선수로를 40m 간격으로 3번 반복조사에서 2.08cm/day 또 200m 간격의 지선수로에서는 1일 평균 3.37cm/day의 삼투량을 얻었다. (3) 단 1회의 결과치를 객관성 있게 취급은 곤난하며 종래에 사용해 온 결과치보다는 손실과 삼투가 공히 상당히 큰 값을 보여주고 있어 좀 더 자세한 연구가 필요하다.

  • PDF

Evaluating efficiency of automatic surface irrigation for soybean production

  • Jung, Ki-yuol;Lee, Sang-hun;Chun, Hyen-chung;Choi, Young-dae;Kang, Hang-won
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.252-252
    • /
    • 2017
  • Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.

  • PDF