• Structural Monitoring and Maintenance
• /
• 제1권1호
• /
• pp.131-157
• /
• 2014

Special track systems used to divert a train to other directions or other tracks are generally called 'railway turnout'. A traditional turnout system consists of steel rails, switches, crossings, steel plates, fasteners, screw spikes, timber bearers, ballast and formation. The wheel rail contact over the crossing transfer zone has a dip-like shape and can often cause detrimental impact loads on the railway track and its components. The large impact also emits disturbing noises (either impact or ground-borne noise) to railway neighbors. In a brown-field railway track where an existing aged infrastructure requires renewal or maintenance, some physical constraints and construction complexities may dominate the choice of track forms or certain components. With the difficulty to seek for high-quality timbers with dimensional stability, a methodology to replace aged timber bearers in harsh dynamic environments is to adopt an alternative material that could mimic responses and characteristics of timber in both static and dynamic loading conditions. A critical review has suggested an application of an alternative material called fibre-reinforced foamed urethane (FFU). The full-scale capacity design makes use of its comparable engineering characteristics to timber, high-impact attenuation, high damping property, and a longer service life. A field trial to investigate in-situ behaviours of a turnout grillage system using an alternative material, 'fibre-reinforced foamed urethane (FFU)' bearers, has been carried out at a complex turnout junction under heavy mixed traffics at Hornsby, New South Wales, Australia. The turnout junction was renewed using the FFU bearers altogether with new special track components. Influences of the FFU bearers on track geometry (recorded by track inspection vehicle 'AK Car'), track settlement (based on survey data), track dynamics, and acoustic characteristics have been measured. Operational train pass-by measurements have been analysed to evaluate the effectiveness of the replacement methodology. Comparative studies show that the use of FFU bearers generates higher rail and sleeper accelerations but the damping capacity of the FFU help suppress vibration transferring onto other track components. The survey data analysis suggests a small vertical settlement and negligible lateral movement of the turnout system. The static and dynamic behaviours of FFU bearers appear to equate that of natural timber but its service life is superior.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.303-314
• /
• 2018

Shear walls are a typical member under a complex stress state and have complicated mechanical properties and failure modes. The separated-elements model Genetic Evolutionary Structural Optimization (GESO), which is a combination of an elastic-plastic stress method and an optimization method, has been introduced in the literature for designing such members. Although the separated-elements model GESO method is well recognized due to its stability, feasibility, and economy, its adequacy has not been experimentally verified. This paper seeks to validate the adequacy of the separated-elements model GESO method against experimental data and demonstrate its feasibility and advantages over the traditional elastic stress method. Two types of reinforced concrete shear wall specimens, which had the location of an opening in the middle bottom and the center region, respectively, were utilized for this study. For each type, two specimens were designed using the separated-elements model GESO method and elastic stress method, respectively. All specimens were subjected to a constant vertical load and an incremental lateral load until failure. Test results indicated that the ultimate bearing capacity, failure modes, and main crack types of the shear walls designed using the two methods were similar, but the ductility indexes including the stiffness degradation, deformability, reinforcement yielding, and crack development of the specimens designed using the separated-elements model GESO method were superior to those using the elastic stress method. Additionally, the shear walls designed using the separated-elements model GESO method, had a reinforcement layout which could closely resist the actual critical stress, and thus a reduced amount of steel bars were required for such shear walls.

• 대한치과교정학회지
• /
• 제26권1호
• /
• pp.43-52
• /
• 1996

Snorer와 정상인의 상기도 부위 연조직의 차이를 비교하며, 자세의 변화에 따른 snorer와 정상인의 상기도 부위 연조직 크기의 변화를 알아보고자 여성에서 snorer군 25명과 정상군 20명을 대상으로 직립위와 앙와위에서 측모 두부방사선 계측 사진을 촬영한 후 연구개, 혀 및 상기도에 관한 거리와 면적을 계측하고 통계학적으로 분석하여 다음과 같은 곁과를 얻었다. 1. 직립위와 앙와위에서 snorer군은 정상군에 비해 혀의 길이가 길고 높이가 높았으며 기도가 좁고 길며 설골은 하방에 위치하였고 넓은 연구개와 좁은hypopharynx를 가졌다. 앙와위에서 snorer군은 이와 더불어 정상군보다 더 넓은 혀와 더 좁은 oropharynx를 가졌다. 2. 직립위에서 앙와위로 자세의 변화에 따라 정상군과 snorer군 모두에서 기도의 길이가 감소하였고 설골이 더 상방위치 되었다. snorer군에서는 이와 더불어 혀의 길이와 높이, 기도의 두께와 oropharynx 면적은 감소하였으며 혀와 연구개 면적은 증가하였다.

• 대한치과교정학회지
• /
• 제50권4호
• /
• pp.238-248
• /
• 2020

Objective: To investigate the effects of the long-term use of a maxillary protraction facemask with miniplate (FM-MP) on pharyngeal airway dimensions in growing patients with cleft lip and palate (CLP). Methods: The study included 24 boys with CLP (mean age, 12.2 years; mean duration of FM-MP therapy, 4.9 years), divided into two groups according to the amount of A point advancement to the vertical reference plane (VRP): Group 1, > 4 mm; Group 2, < 2 mm; n = 12/group. After evaluating the skeletodental and airway variables using lateral cephalograms acquired before and after FM-MP therapy, statistical analyses were performed. Results: Group 1 showed greater forward and downward displacements of the posterior maxilla (posterior nasal spine [PNS]-horizontal reference plane [HRP]; PNS-VRP), greater increase in ANB, more forward tongue position (tongue tip-Pt vertical line to Frankfort horizontal plane), and greater increase in the oropharynx (superior posterior airway space [SPAS]; middle airway space [MAS]) and upper nasopharynx (PNS-adenoid2) than did Group 2. While maxillary advancement (A-VRP and PNS-VRP) correlated with increases in SPAS, MAS, and PNS-adenoid2, downward displacement of the PNS (PNS-HRP) correlated with increases in SPAS, MAS, PNS-adenoid1, and PNS-adenoid2, and with a decrease in vertical airway length (VAL). Mandibular forward displacement and decrease in mandibular plane correlated with increases in MAS. Conclusions: FM-MP therapy had positive effects on the oropharyngeal and nasopharyngeal airway spaces without increases in VAL in Group 1 rather than in Group 2. However, further validation using an untreated control group is necessary.

• 치과방사선
• /
• 제25권1호
• /
• pp.39-49
• /
• 1995

This study was performed to determine the each location of lesions in the maxillary sinus and to evaluate the relationship between the floor of the antrum and the apical regions of teeth by the comparison of the panoramic view and panoramic sinus view. For this study, experimentally with two dry skulls, jelly balls of 8mm and 15mm in diameter containing a short wire for the radiopacity similar to the cyst and clinically 5 patients having mucosal cyst in the antrum and 10 patients having periapical lesion of molar were used. The experimental cystic lesions were simulated with jelly ball being attached in turn to each wall of the antrum. The radiolucent periapical lesions of upper molars were formed by using round bur and the radiopaque periapical lesions were simulated by filling the former lesions with lead foil. Each panoramic view and each panoramic sinus view of the experimental lesions and patients were obtained by using panoramic machine and analyzed. The obtained results were as follows : 1. On the panoramic sinus view, the innominate line was approximately coincided with the most lateral portion of the antrum and the posterior wall appeared as the narrow area at the mesial side of the innominate line. The anterior wall occupied totally the mesial side of the innominate line, and the medial wall occupied the mesial half of the antrum. 2. In all cases of experimental cystic lesion attached to each wall of the antrum, the location of each lesion was able to be determined by applying Tube shift technic. 3. The palatal root and mesiobuccal root of the molar appeared as being transposed each other mesiolaterally on the panoramic and panoramic sinus views. 4. The panoramic sinus view was superior to the panoramic view in revealing the relationship between the floor of the antrum and the periapical lesion.

• Archives of Plastic Surgery
• /
• 제42권5호
• /
• pp.596-600
• /
• 2015

Background The uptake of breast reconstruction is ever increasing with procedures ranging from implant-based reconstructions to complex free tissue transfer. Little emphasis is placed on scarring when counseling patients yet they remain a significant source of morbidity and litigation. The aim of this study was to examine the scarring preferences of men and women in breast oncoplastic and reconstructive surgery. Methods Five hundred men and women were asked to fill out a four-page questionnaire in two large Irish centres. They were asked about their opinions on scarring post breast surgery and were also asked to rank the common scarring patterns in wide local excisions, oncoplastic procedures, breast reconstructions as well as donor sites. Results Fifty-eight percent of those surveyed did not feel scars were important post breast cancer surgery. 61% said that their partners' opinion of scars were important. The most preferred wide local excision scar was the lower lateral quadrant scar whilst the scars from the deep inferior epigastric artery perforator (DIEP) flap were most favoured. The superior gluteal artery perforator flap had the most preferred donor site while surprisingly, the DIEP had the least favourite donor site. Conclusions Scars are often overlooked when planning breast surgery yet the extent and position of the scar needs to be outlined to patients and it should play an important role in selecting a breast reconstruction option. This study highlights the need for further evaluation of patients' opinions regarding scar patterns.

• Archives of Plastic Surgery
• /
• 제37권1호
• /
• pp.31-36
• /
• 2010

Purpose: The primary goal of palatoplasty is to enable normal speech with harmonious growth of face. Some children who had palatoplasty display typical findings of transverse maxillary deficiency requiring orthodontic widening of the maxilla. Levi (2009) described a cleft palate repair coupled with pedicled buccal fat pad flaps to cover bone exposed areas of the hard palate. Hence we report clinical experiences of cleft palate repair using pedicled buccal fat pad flap. Methods: Four Veau class II and a Veau class I cleft palate patients underwent palatoplasty with buccal fat pad flap by single surgeon from April 2009 to August 2009. Two patients received 2-flap palatoplasty and three patients 1-flap palatoplasty, respectively. After the cleft palate repair, sharp mosquito scissors was placed in the superior buccal sulcus just lateral to the maxillary tuberosity and inserted directly through the mucosa resulting in buccal fat pad extrusion. The elevated flap was moved to cover mucoperiosteal defect in hard palatal area. Results: Five patients underwent primary palatoplasty using buccal fat pad flap. Flap harvest and inset took on average 9 minutes per flap. Mucosal epithelization took 18 days on average. No patients had complications related to the buccal fat pad flap. Conclusion: Buccal fat pad pedicled flap has significant potential to function as an added vascularized tissue layer in cleft palate repair and we can expect better growth of maxilla with this method although longer duration of follow-up was unavailable.

• Archives of Plastic Surgery
• /
• 제36권4호
• /
• pp.503-506
• /
• 2009

Purpose: Unilateral breast reconstruction after mastectomy confront the challenges of recreating a natural appearing breast mound and achieving symmetricalness of the breasts. If the patient's remaining breast is large compared to reconstructed breast, the most common procedure is reduction mammoplasty of the large breast side. The authors experienced a new method of breast reconstruction using the excess breast tissue from the contralateral breast after breast reduction. Methods: The excess tissue from the contralateral breast after vertical reduction mammoplasty with superior pedicle and remaining lower breast tissue were transferred to the mastectomy site breast through the subcutaneous tunnel on the chest wall. The main blood supplies of the flap are perforator branches of the 4th, 5th and 6th anterior intercostal artery. After elevating and detaching the flap on the lower lateral area of the breast, the turn overed flap is fixed on the upper portion of the chest wall of the mastectomy site. Results: On two cases of the breast reconstructions, remaining excess breast tissue from reduction mammoplasty was transferred to the contralateral breast side as pedicles. Both patient and operator were satisfied with the outcome of the reconstruction as the breasts were symmetrical and natural shape. Conclusion: We have performed unilateral breast reconstruction using the excess breast tissue after reduction mammoplasty of the contralateral breast. As Oriental women's breasts are relatively smaller than that of Caucasian women, delayed breast reconstruction cases of Oriental women with large breasts(macromastia) seem to be ideal for this procedure.

• Archives of Plastic Surgery
• /
• 제44권1호
• /
• pp.34-41
• /
• 2017

Background The current indications of cardiac implantable electronic devices (CIEDs) have expanded to include young patients with serious cardiac risk factors, but CIED placement has the disadvantage of involving unsightly scarring and bulging of the chest wall. A collaborative team of cardiologists and plastic surgeons developed a technique for the subpectoral placement of CIEDs in young female patients via a transaxillary approach. Methods From July 2012 to December 2015, subpectoral CIED placement via an axillary incision was performed in 10 young female patients, with a mean age of 25.9 years and mean body mass index of $20.1kg/m^2$. In the supine position, with the patient's shoulder abducted, an approximately 5-cm linear incision was made along one of the deepest axillary creases. The submuscular plane was identified at the lateral border of the pectoralis major, and the dissection continued over the clavipectoral fascia until the subpectoral pocket could securely receive a pulse generator. Slight upward dissection also exposed an entrance to the subclavian vein, allowing the cardiology team to gain access to the vein. One patient with dilated cardiomyopathy underwent augmentation mammoplasty and CIED insertion simultaneously. Results One case of late-onset device infection occurred. All patients were highly satisfied with the results and reported that they would recommend the procedure to others. Conclusions With superior aesthetic outcomes compared to conventional methods, the subpectoral placement of CIEDs via a transaxillary approach is an effective, single-incision method to hide operative scarring and minimize bulging of the device, and is particularly beneficial for young female or lean patients.

• 감성과학
• /
• 제5권4호
• /
• pp.67-75
• /
• 2002

뇌기능 장애 환자에서 자세균형 제어능력의 저하는 보행 및 일상생활동작 수행 등에 어려움을 초래하며 이에 대한 정확한 평가 및 치료를 위하여 일상의 환경변화와 유사한 상황을 제공하고 이에 따른 자세균형 조절 능력을 파악하는 것이 중요하다. 본 연구는 뇌기능 장애 환자에서 가상적 움직이는 환경에 따른 자세균형 조절 기능을 정확히 평가하고 환경의 움직임이 자세균형 조절에 미치는 영향을 분석하였다. 15명의 뇌기능 장애 환자들과 정상인 15명을 대상으로 실생활과 유사한 환경의 조성을 위하여 HMD를 이용한 가상 환경 움직임(Virtual Moving Surround)을 네 가지 다른 패턴으로 제공하였다. 자세동요의 정도는 힘판을 이용하여 신체압력중심의 변화를 전체이동거리, 동요주파수, 최대 빈도 COP 위치로 측정하였으며 가상 환경의 차이에 따른 변화를 비교 분석하였다. 연구결과 검사 재검사 신뢰도평가에서 일관된 분석결과를 나타냈고 뇌 기능장애 환자와 정상인의 분석에서는 두 그룹간의 차이를 확인할 수 있었다. 특히 전후로 빠르게 변하는 가상 환경에서 가장 큰 자세동요를 나타내었고 통계적으로 유의한 차이가 있었다. 본 연구를 통해 뇌기능 장애 환자에서 가상 환경 변화가 자세균형 조절에 미치는 영향을 확인할 수 있었으며 이러한 환자들을 위한 치료와 평가 환경 조성 등에도 유용한 자료로 쓰일 수 있을 것으로 사료된다