• 자동차안전학회지
• /
• 제9권2호
• /
• pp.26-32
• /
• 2017

This paper presents the lateral stability criteria for integrated chassis control. To determine the intervention timing of chassis control system, the lateral stability criteria is needed. The proposed lateral stability criteria is based on velocity-yawrate gain domain to determine whether vehicle is stable. If the yawrate gain violates the proposed criteria, the stability of the vehicle is considered as unstable. Characteristic velocity and critical velocity are employed to distinguish lateral stability criteria. The inside of the two boundaries is stable and the outside is unstable. If yawrate gain of vehicle violates the lateral stability criteria, the chassis control begin to intervene. To validate the lateral stability criteria, both computer simulations and vehicle test are conducted with respect to circular turn scenario. The proposed lateral stability criteria makes it possible to reduce intervention of chassis control system.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.51-57
• /
• 2011

Information of the lateral velocity and the sideslip angle in a vehicle is very useful in many active vehicle safety applications such as yaw stability control and rollover prevention. Because cost-effective sensors to measure the lateral velocity and the sideslip angle are not available, reliable algorithms to estimation them are necessary. In this paper, a sliding mode observer is designed to estimate the lateral velocity. The side slip angle is estimated using the recursive least square with the disturbance observer and the pseudo integral. The estimated parameters from the combined estimation method are updated recursively to minimize the discrepancy between the model and the physical plant, and any possible effects caused by disturbances. The performance of the proposed monitoring system is evaluated through simulations and experiments.

• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.55-65
• /
• 2002

소성흐름을 발생시키는 측방유동 가능지반내에 설치된 매설관에 작용하는 토압에 대한 메카니즘을 규명하기 위해 파괴형상실험을 실시하고, 파괴형상실험을 토대로 지반변형속도를 고려하기 위해 Maxwell 점탄성 모델을 적용한 토압산정식을 제안하였다. 직접전단실험으로 구한 점성계수와 내부마찰각과 상재압을 고정하여 이론식으로 도출해낸 점성계수가 잘 일치하고 있음을 확인하였고 모형실험결과와 이론식에 의한 토압은 지반변형속도에 영향을 받으며 비교적 일치하며 지반변형이 없는 경우에도 정지토압을 받음을 알 수 있다. 또한, 지반의 지지력은 점성토에서는 관입전단파괴시의 값과 거의 일치하였다. 또한, 매설관 주변지반의 파괴모드는 매설관직경과 무관하게 지반변형속도에 영향을 받으며 작용토압은 균질한 지층의 경우 선형적으로 증가하고 조립질에 가까울수록 선형적 감소치를 보이므로 매설관주변지반의 매립재를 이용하여 매설관주변의 토압을 경감시킬 수 있음을 알 수 있다.

• 한국자동차공학회논문집
• /
• 제23권5호
• /
• pp.478-485
• /
• 2015

Availability of the climbing angle information is crucial for the intelligent vehicle system. However, the climbing angle information can't be measured with the sensor mounted on the vehicle. In this paper, climbing angle estimation system is proposed. First, longitudinal acceleration obtained from gyro-sensor is compared with the actual longitudinal acceleration of the vehicle. If the vehicle is in yawing motion, actual longitudinal acceleration can't be approximated from time derivative of wheel speed, because lateral velocity and yaw rate affect actual longitudinal acceleration. Wheel speed and yaw rate can be obtained from the sensors mounted on the vehicle, but lateral velocity can't be measured from the sensor. Therefore, lateral velocity is estimated using unknown input observer with nonlinear tire model. Simulation results show that the compensated results using lateral velocity and yaw rate show better performance than uncompensated results.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.504-507
• /
• 2011

The inertial migration of a two-dimensional elastic capsule in a channel flow was studied over the Reynolds number range $1{\leq}Re{\leq}100$. The lateral migration velocity, slip velocity, and the deformation and inclination angle of the capsule were investigated by varying the lateral position, Reynolds number, capsule-to-channel size ratio(${\lambda}$), membrane stretching coefficient(${\Phi}$), and membrane bending coefficient(${\gamma}$). During the initial transient motion, the lateral migration velocity increased with increasing Re and ${\lambda}$ but decreased with increases in ${\Phi}$, ${\gamma}$ and the lateral distance from the wall. The initial behavior of the capsule was influenced by variation in the initial lateral position ($y_0$), but the equilibrium position of the capsule was not affected by such variation. The balance between the wall effect and the shear gradient effect determined the equilibrium position. As Re increased, the equilibrium position initially shifted closer to the wall and then moved towards the channel center. A peak in the equilibrium position was observed near Re=30 for ${\gamma}=0.1$, and the peak shifted to higher Re as ${\gamma}$ increased. Depending on the lateral migration velocity, the equilibrium position moved toward the centerline for larger ${\gamma}$ but moved toward the wall for larger ${\Phi}$ and ${\gamma}$.

• Journal of Oral Medicine and Pain
• /
• 제22권1호
• /
• pp.167-181
• /
• 1997

The aim of this study was to investigate the relationship between velocity and factors which could affect the velocity of mandibular movement. For this study, 30 dental students without any masticatory signs and symptoms and 90 patients with temporomandibular disorders(TMD) were selected as the control group and the patients group, respectively. After determining Angle's classification and lateral guidance pattern of occlusion, clinical examination for TMD was perfomed. Velocity and distance of mandibular movements were recorded with BioEGN, reproducibility index of lateral excursions was evaluated by Pantronic(PRI) and BioEGN (BERI) activity in masticatory and cervical muscles were measured with BioEMG, and occlusal contact time and cross-arch unbalance(Total left-right statistics, TLR) on clenching were recorded with T-scan, respectively. The results of this study were as follows : 1. Velocity in the patients was faster than that in the controls in most mandibular movements, but on wide opening and closing movement, result was reverse. 2. Velocity on closing movements were faster than that on opening movements in the control group and a similar tendency was also shown in the patients group. 3. Patients with muscle disorders showed a tendency to have the highest value of velocity of all diagnostic subgroups, while patients with degenerative joint diseases showed a tendency to have the lowest value. 4. Patients with canine guidance showed a tendency to have the highest value of velocity in three subgroups by lateral guidance pattern, while patients with group function showed a tendency to have the lowest value. 5. BERI had a positive correlation with opening velocity on lateral excursion, while TLR had a negative correlation with opening velocity on swallowing. 6. EMG activity on clenching in masticatory muscles had negative correlation with opening velocity on border movements, and on swollowing, while the activity in rest correlated positively with opening velocity on border movements. 7. There were positive correlation between the velocity and the distance in long components of mandibular trajectory.

• 전자공학회논문지A
• /
• 제31A권1호
• /
• pp.54-60
• /
• 1994

In this paper, we present the analytical models for the change of the lateral electric field distribution and the velocity saturation region length with the electron trapping of stressed SC-PMOSFET in the saturation region. To derive the hot-electron-induced lateral electric field of stressed SC-PMOSFET. Ko's pseudo two dimensional box model in the saturation region which illustrates the analysis of the velocity saturation region is modified under the condition of electron trapping in the oxide near the drain region. From the results, we have the following lateral electric field in the y-direction, that is, E(y) ES1satT.cosh(y/l) qNS1tT.sinh(y/l)/lCox. It is shown that the trapped electrons influence the field in the drain region. decreasing the lateral electric field. Calculated velocity saturaion length increases with the trapped electrons. increasing the drain current of stressed SCPMOSFET. This results well explain the HEIP phenomenon of PMOSFET's.

• 한국항공우주학회지
• /
• 제31권6호
• /
• pp.45-51
• /
• 2003

본 논문에서는 소형 커나드 항공기인 Velocity-173의 가로안정성을 향상시키기 위한 방법에 대하여 연구하였다. Velocity-173의 세로안정성은 매우 우수한 반면, 가로안정성은 상대적으로 나쁘다. 가로안정성을 향상시키기 위해 수직미익의 면적을 증가시키는 작은 패널을 설계 및 제작하였다. 패널 설계 과정에서 AAA를 이용하여 패널 부착으로 인한 가로안정성의 변화를 예측하였다. 패널 부착 효과를 검증하기 위해 비행시험이 수행되었다. 또한, 비행시험 데이터로부터 안정/조종 미계수를 추출하기 위하여 최대공산추정법을 이용하였다. 본 연구를 통해 수직미익 아래에 부착된 패널의 효과를 확인할 수 있었다.

• 한국수자원학회논문집
• /
• 제35권2호
• /
• pp.195-201
• /
• 2002

본 연구에서는 자연하천의 만곡수로에서 종방향 유속으로 인해 현재보다 더 이상 횡 방향 경사의 변형이 일어나지 않아 세굴이 감소하고 하상이 횡방향으로 안정한 상태를 유지할 수 있는 적정 유속의 한계인 한계속도를 제시하였다. 한계속도의 이론 유도는 하상횡경모형의이론적 배경이 되는 운동량모멘트방정식으로부터 얻은 하상면 횡방향전단력성분과 이에 대응하는 하상전단력과의 힘의 평형으로부터 유도되었다. 이론식의 검증을 위해 4개 자연하천수로의 실측자료론 적용하여 계산치와 실측치를 비교한 결과 잘 일치하였다. 적용결과에서 보정계수와 만곡수로의 평균입자 Froude수는 밀접한 상관관계를 갖고 있는 것으로 나타났다.

• 자원환경지질
• /
• 제30권5호
• /
• pp.469-476
• /
• 1997

In the conventional velocity analysis, the peaks of a semblance panel are picked and the stacking velocities of the peaks are assumed as RMS velocities from which interval velocities are determined. This velocity analysis technique is correct only for horizontal homogeneous layes and incurs error in a layer whose velocity varies laterally. Tediousness of peak picking and error in velocity analysis can be reduced by automatic velocity analysis techniques. An automatic velocity analysis algorithm has been presented in order to improve these problems by considering the stacking velocity from the view point of interval velocity model and by relating the stacking velocity and the interval velocity with the traveltimes. In this paper, we apply the automatic velocity analysis method to simple models having lateral velocity anomaly to verify the effectivenesses and limits of this method. From the results of numerical experiments, we can determine the interval velocites without pickings of the stacking velocities in the one-dimensional velocity analysis and the general patterns of the laterally varying interval velocities appear in the two-dimensional case. However, the interval velocity and the depth of velocity anomaly determined by two-dimensional automatic velocity analysis are somewaht discrepant in those of the theoretical model.