• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.1-6
• /
• 1985

The purpose of this experiment lies in finding the most appropriate cutting condition of Taxus cuspidata Sieb. et Zucc. which has been considered valuable tree species in gardening. Statistical analysis was focused on the comparison of the average ratios of rooting between greenhouses and fields, based on the observation rooted autogenis. To conduct this survey, hardwood cutting of Taxus cuspidata Sieb. et Zucc. were performed at both places of experiment above on April 20, 1982 with rooting results calculated on October 31, 1982. After formation of cuttings, it was soaked in IBA 200 ppm for 12 hours and than put in a bed. A summary of the result is presented as follows; 1) Cutting at the greenhouse showed higher average rate of rooting than at fields. Same tendency was found regardless of the differences in treatment. 2) It was clear that IBA-treatment contributed remarkably to causing higher average rooting rate. As an evidence, when twenty centimeter cuttings were inserted sandy media, IBA-treated area resulted in eighty six percent of average rooting rate, as compared with only twenty three percent in nontreatment case. In case of field cutting, IBA-treatment brought about fifty three percent of rooting in comparison with eleven percent nontreatment. 3) When sandy soil, loam and brown soil were separately used as cutting media, the highest rooting rate was found in case of sandy soil, without any difference between the two experimental places above. 4) As a result of the analysis to seek the impact of the length of cuttings on rooting, the range of length form fifteen to twenty centimeter was apparently most appropriate. It was also found that the rate of rooting declined beyond twenty five centimeter. 5) Two kinds of rooting pattern were observed. One was the case that callus cell lump was created on the lower cut side of cuttings. Importantly, root radical were formed inside the lump to influence the germination of root system. The other relates to the case that adventitious root which look like lateral roots appeared at the stem region. In abstract, first, sandy soil was effectively recommended in case of hardwood cutting in April. Second, the most appropriate length of cuttings ranged between fifteen and twenty centimeters. Third, high density IBA treatment was clearly effective. Forth, for proper environmental management, both pre-disinfection of sail by sterilizer and maintenance of high relative humidity were essentially required.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.252-252
• /
• 2017

Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.339-348
• /
• 2006

Objective: With development of the skeletal anchorage system, orthodontic mini-implant (OMI) assisted on masse sliding retraction has become part of general orthodontic treatment. But compared to the emphasis on successful anchorage preparation, the control of anterior teeth axis has not been emphasized enough. Methods: A 3-D finite element Base model of maxillary dental arch and a Lingual tipping model with lingually inclined anterior teeth were constructed. To evaluate factors influencing the axis of anterior teeth when OMI was used as anchorage, models were simulated with 2 mm or 5 mm retraction hooks and/or by the addition of 4 mm of compensating curve (CC) on the main archwire. The stress distribution on the roots and a 25000 times enlarged axis graph were evaluated. Results: Intrusive component of retraction force directed postero-superiorly from the 2 mm height hook did not reduce the lingual tipping of anterior teeth. When hook height was increased to 5 mm, lateral incisor showed crown-labial and root-lingual torque and uncontrolled tipping of the canine was increased.4 mm of CC added to the main archwire also induced crown-labial and root-lingual torque of the lateral incisor but uncontrolled tipping of the canine was decreased. Lingual tipping model showed very similar results compared with the Base model. Conclusion: The results of this study showed that height of the hook and compensating curve on the main archwire can influence the axis of anterior teeth. These data can be used as guidelines for clinical application.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.298-305
• /
• 2016

The maxillary anteriors play an important role in esthetics. Therefore after extraction, it is crucial to preserve the hard tissue and soft tissue in order to promote esthetics of restoration. There are several challenges when restoring the maxillary anteriors via implant. Some of the challenges are be maintaining consistency with neighboring teeth in terms of shade, form, and texture : as well as having harmonious emergency with the gingival margin. In this case, a traumatized patient with crown-root fracture of the maxillary central and lateral incisors is presented. The cracked teeth were extracted, and implants were inserted with bone grafts to compensate the volume of damaged area of the maxillary anterior. Cantilever implant prosthetics were planned while precise adjustments to the gingival area were made using customized impression coping to perform the esthetic restorations. The final outcome of the treatment was satisfying in both esthetic and utilitarian perspective.

• The korean journal of orthodontics
• /
• v.47 no.6
• /
• pp.375-383
• /
• 2017

Objective: The purpose of this study was to evaluate the dental and skeletal effects of the modified C-palatal plate (MCPP) for total arch distalization in adult patients with Class II malocclusion and compare the findings with those of cervical pull headgear. Methods: The study sample consisted of the lateral cephalograms of 44 adult patients with Class II Division 1 malocclusion, including 22 who received treatment with MCPP (age, $24.7{\pm}7.7years$) and 22 who received treatment with cervical pull headgear (age, $23.0{\pm}7.7years$). Pre- (T1) and post-treatment (T2) cephalograms were analyzed for 24 linear and angular measurements. Multivariate analysis of variance was performed to evaluate the changes after treatment in each group and differences in treatment effects between the two groups. Results: The mean amount of distalization at the crown and root levels of the maxillary first molar and the amount of distal tipping was 4.2 mm, 3.5 mm, and $3.9^{\circ}$ in the MCPP group, and 2.3 mm, 0.6 mm, and $8.6^{\circ}$ in the headgear group, respectively. In addition, intrusion by 2.5 mm was observed in the MCPP group. In both groups, the distal movement of the upper lip and the increase in the nasolabial angle were statistically significant (p < 0.001). However, none of the skeletal and soft tissue variables exhibited significant differences between the two groups. Conclusions: The results of this study suggest that MCPP is an effective treatment modality for total arch distalization in adults.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.209-217
• /
• 1999

This study was concerned with comparing the measured values of labial alveolar bone through the lateral cephalometric radiography and mandibular incisor cross-sectional tomogram between two groups, one group of mandibular prognathism patients who needed an orthognathic surgery as an experimental group and the other group who had normal molar relationships as a control group. The purpose of the study was to find out the predisposing factor of bone resorption and gingival recession before orthodontic treatment. The results were as follows: 1. The cross-sectional area of labial alveolar bony plate in mandibular prognathism was significantly smaller than that of control group. 2. In mandibular prognathism, the distance between cementoenamel junction and alveolar crest was significantly greater than control group. 3. There were negative correlations between area of labial alveolar bony plate and distance from cementoenamel junction to alveolar crest, and positive correlations between area of labial alveolar bony plate and distance from alveolar crest to root apex. 4. In mandibular prognathism, there were positive correlations between IMPA and thickness of symphysis, and negative correlations between IMPA and the alveolar bony height. The results of the present study suggest the mandibular prognathism patients are prone to the gingival recession due to the small amount of labial alveolar bone around lower incisors.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.519-525
• /
• 2010

Ectopic eruption means the eruption of the tooth in an abnormal position due to multiple factors, which found most frequently in maxillary fist permanent molars, mandibular lateral incisors and maxillary permanent canines. Ectopic eruption of the maxillary first permanent molar occurs when the molar erupts with a more mesial angulation than normal, and locks itself in an atypical resorption on the distobuccal root of the second primary molar. The maxillary first permanent molar plays important roles for mastication and occlusion, so ectopically erupted maxillary first permanent molars should be relocated into proper position. Treatment options are separation by insertion of the brass wire or elastic rings, preparation of distal aspect of the maxillary second primary molar, using fixed or removable appliance with finger spring, and placement of space maintainer or space regainer after extraction of the maxillary second primary molar. We report three cases treated of ectopically erupted maxillary first permanent molar by re-setting of stainless steel crowns, placement of brass wire and using active plate. We could find out distal movement of maxillary first permanent molars into proper position and normal occlusion.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.482-486
• /
• 2004

Benzyladenopurine (BA), a synthetic chemical commonly used for bean sprout culture, should be minimized for wellbeing foods or not be applied. The study was done to check the effect of different BA concentrations treated during 5 hour imbibition on growth and morphological characters of mungbean sprouts. The mungbean seeds of 3 cultivars (Keumseongnogdu, Owoolnogdu, and Zhong Lu 1) were imbibed for 5 hours in the solutions with different BA concentrations (0, 25, 50, 75, and 100 ppm) before 3 hour aeration. On the 6th day after culture, the mungbean sprouts were classified by 4 categories on the base of hypocotyl length; > 7cm, 4 to 7cm, < 4cm, and non-germination, and their morphological characters, fresh and dry weights were measured. Regardless of cultivars the composition rate of hypocotyls of longer than 7cm was decreased with increased BA concentration over 50 ppm while the reverse result was true in the rate of shorter than 4cm. In the rate of 4 to 7cm. cv. Owoolnogdu showed the highest rate in its 50 ppm concentration although cv. Keumseongnogdu and Zhong Lu 1 showed similar result to the above two rates. Formation rate and its number of lateral roots were largely changed around 50 ppm concentration but the roots was not formed in over its 75 ppm concentration. Hypocotyl and root lengths of all the cultivars were shortened with increased BA concentration. In the diameter of middle part of hypocotyl, 3 cultivars showed nearly the same responses as the rate of 4 to 7cm hypocotyls. Hypocotyl and total fresh weights per sprout were heavier in BA treated sprouts than in no treated ones but the weights of the former sprouts were not influenced by its different concentrations.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.232-237
• /
• 2003

Benzyladenopuyine (BA) commonly used for soybean sprout production is of high price. The study was carried out to determine the effect of BA treatment time during seed imbibition on growth and development of soybean sprouts and to analyse its treatment cost. The soybean seeds of 4 cultivars were soaked in 4 ppm BA solution during the first 5.5 hour imbibition (EFHI), the second 5.5 hour imbibition (SFHI) immediately after 0.5 hour aeration, or whole 11.0 hour imbibition (WFHI) intervened by aeration. On the 6th day after culture, the soybean sprouts were classified into 4 categories on the base of hypocotyl length; ＞ 7cm, 4 to 7cm, ＜ 4 cm and not germinated, and their morphological characters, fresh and dry weights were measured. Water absorption of the seeds was sharply reduced after it was almost done for the first 5.5 hours. The percentage of sprouts with hypocotyls of longer than 4cm was higher in FFHI treatment than in the other two ones. Regardless of BA imbibition time and periods, the lateral roots were not observed. WFHI treatment showed shorter hypocotyl and root lengths but thicker hypocotyl and hook diameters than FFHI and SFHI treatments. All component fresh and dry weights except cotyledon fresh weight were nearly same. Treatment cost of BA was the lowest in SFHI treatment. It is concluded that BA treatment during SFHI is the best time because its treatment time did not affect sprout growth but its treatment cost.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.1
• /
• pp.35-43
• /
• 2000

Objective : Percutaneous lumbar approaches such as arthroscopic discectomy, laser discectomy, and nucleotome remain controversial and have technical limitations to free fragment disc, bony pathology and access to L5-S1, The purpose of this study was to determine efficacy of this new endoscopic system and to report techniques and tactics. Methods : From July 1997 to May 1998, we treated 40 consecutive patients(43 levels) with the MED system. Mean age was 32 years(range ; 18 to 62). There were 30 males and 10 females. All patients had sciatica with SLRT limitation. There were 23 patients with disc herniation at L4-5 and 14 patients at L5-S1. Three patients had 2 level disc herniations. There was one far lateral disc herniation at L4-5. Results : Using modified MacNab criteria, there were 37 excellent results and 3 good result. Most patients were discharged within 3-4 days except 2 patients with dural tearing. There were no other complications. Mean operation time was 1.5 hours(range : 40 minutes to 2.5 hours). Conclusion : The MED system is a reliable approach to lumbar disc herniations. This system combines the advantages of conventional open surgery and a minimally invasive technique. As tactics for the doctors who wish to attempt, "palpate" the lamina by first dilator, identification of interlaminar space by removal of overlying soft tissue and confirmation of the shoulder portion of nerve root before discectomy are important to this procedure. We conclude that lumbar disc herniations can be successfully treated with MED approach.