• 콘크리트학회논문집
• /
• 제20권1호
• /
• pp.35-41
• /
• 2008

플랫플레이트 시스템은 주로 전단벽과 가새 골조와 같은 횡력저항 시스템과 함께 중력저항 시스템으로 사용된다. 따라서 지진과 같은 횡하중이 작용할 때, 중력저항 시스템은 중력하중에 대한 전달 능력을 유지하면서 일체로 연결된 횡력저항 시스템의횡변위를 견딜 수 있어야 한다. 또한 플랫플레이트 시스템은 지진에 대한 특별 상세조건에 만족하면 중간 모멘트 골조로써 횡력저항 시스템으로도 사용할 수 있다. 그러나 횡하중이 작용하는 경우 플랫플레이트 시스템은 횡변위와 불균형모멘트로 인한 뚫림 전단의 위험성은 더욱 커지게 된다. 따라서 플랫플레이트 시스템을 중력 저항 또는 횡력 저항 시스템으로 설계하는 모든 경우에 중력하중뿐만 아니라 횡하중하의 설계 내력 (모멘트와 전단력)과 변위 등의 합리적인 예측은 매우 중요하다. ACI 318 (2005)에서는 중력하중에 대한 해석시 직접설계법과 등가골조법을 제시하고 있으며, 횡하중에 대한 해석으로 유한요소법, 유효보폭법, 등가골조법을 허용한다. 이러한 해석법은 각각 장단점을 갖고 있으며, 매우 광범위한 해석 결과를 보인다. 따라서 구조 설계자들은 적절한 해석법의 선택과 해석 결과를 분석하는데 어려움을 갖는다. 본 연구의 목적은 플랫플레이트 해석법에 대한 구조 설계자들이 적절한 해석법을 선택할 수 있도록 하고, 횡하중에 대한 해석 방법으로 수정된 등가골조법의 실용성을 검증하고자 하였다. 이를 위하여 중력하중과 횡하중을 받는 7층의 플랫플레이트 구조물에 대한 내부력과 횡변위를 대상으로 유한요소해석을 수행하고 각 골조해석법의 결과를 비교하였다. 또한 각 골조해석법의 정확성은 기존 플랫플레이트 슬래브 구조물의 실험 결과와 비교하여 검증하였다.

• 콘크리트학회지
• /
• 제20권2호
• /
• pp.14-18
• /
• 2008

• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.3-14
• /
• 2000

Structural performance of the walls subjected to lateral load reversals depends on various parameters such as loading history, sectional shape, reinforcement, lateral confinement, aspect ratio, axial compression, etc. Thus, the performance of the shearwall for wall-type apartment should be evaluated properly considering above parameters. This study investigates the effect of sectional shape on the structural performance of the wall. Sectional shape of the specimen is rectangular, barbell and T. Based on this experimental results, all specimens behaved as ductile fashion and failed by concrete crushing of the compression zone. Deformation index of those specimens evaluated better than 3 of ductility ratio, and 1.5% of deformability specified by seismic provision. Moreover, the performance of the rectangular shaped specimen, whose compression zone was confined with U-bar and cross tie, was as good as the barbell shaped specimen. Therefore, if we considered construction practice such as workmanship and detailing, shearwall with rectangular section may be more economical lateral load resisting system.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.1133-1153
• /
• 2016

In this article, an additive performance ratio method using structural analysis of both 2D and 3D is introduced to mitigate the complexity of work evaluating structural performances of numerous steel outrigger alternatives in multi-story buildings, especially high-rise buildings. The combined structural analysis process enables to be the design of economic, safe, and as constructional demanding structures by exploiting the advantages of steel, namely: excellent energy dissipation and ductility. First the approach decides the alternative of numerous steel outriggers by a simple 2D analysis module and then the alternative is evaluated by 3D analysis module. Initial structural analyses of outrigger types are carried out through MIDAS Gen 2D modeling, approximately, and then the results appeal structural performance and lead to decide some alternative of outrigger types. ETABS 3D modeling is used with respect to realization and evaluation of exact structural behaviors. The approach reduces computational burden in compared to existing concepts such as full 3D analysis methods. The combined 2D and 3D tools are verified by cycle and displacement tests including comprehensive nonlinear dynamic simulations. The advantages and limitations of the Additive Performance Ratio Approach are highlighted in a case study on a high rise steel-composite building, which targets at designing the optimized alternative to the existing original outrigger for lateral load resisting system.

• KIEAE Journal
• /
• 제10권5호
• /
• pp.151-157
• /
• 2010

This study is connected with evaluation of the progressive collapse resisting capacity for sustainable RC super tall building design. As the progressive collapse is not considered in current design codes in Korea, differences between linear static and dynamic analysis based on the GSA guidelines was analyzed for better evaluation, and the analysis model of flat plate system was determined. Finally, the progressive collapse resisting capacity was evaluated for structural system of super tall building. According to this study, the results by linear dynamic analysis were underestimated than the results by linear static analysis. Thus, the dynamic coefficient value of 2 provides conservative approach. The Effective Beam Width's model, currently used in field, is useful for the analysis about lateral force, but this model does not consider the effect of load redistribution by the slab. Hence, finite element analysis considering slab element will be needed for progressive collapse resisting capacity of the flat plate system. Finally, analysis model of 80-story building designed based on KBC(Korea Building Code) shows the weakness against progressive collapse because the DCR value is over 2. Thus, the countermeasure for alternative loading path such as installment of spandrel beam and reinforcements around slab is required to prevent the progressive collapse.

• Advances in Computational Design
• /
• 제3권1호
• /
• pp.17-34
• /
• 2018

Tall buildings are categorized as important structures because of the large number of occupants and high construction costs. The choice of competent lateral load resisting systems in tall buildings is of crucial importance. Bracing systems have long been an economic and effective method for resisting lateral loads in steel structures. However, there are some potential adverse aspects to bracing systems such as the limitations they inflict on architectural plans, uplift forces and poor performances in compression. in order to eliminate the mentioned problems and for cost optimization, in this paper, six 20-story steel buildings and frames with different types of bracing, i.e., conventional, mega-scale and buckling-restrained bracing (BRB) were analyzed. Linear and modal push-over analyses were carried out. The results pointed out that Mega-Scale Bracing (MSB) system has significant superiority over the conventional bracing type. The MSB system is 25% more economic. Some other advantages of MSB include: up to 63% less drift ratio, up to 38% better performance in lateral displacement, up to 100% stiffer stories, and about 50% smaller uplift forces. Moreover, MSB equipped with BRB attests even a better seismic behavior in the aforementioned parameters.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.618-623
• /
• 2008

Due to recent trends of the atypical plan shapes and the zoning construction in high-rise buildings, the building stability under construction is arising as an important issue for design and construction plan. To ensure the stability under construction, the differential column shortening and the lateral movements with unbalanced distributions of self-weight of structure members and the load flows before completion of member connections and lateral load resisting system should be checked by construction sequence analysis. This paper presents the scheme of zone-based construction sequence analysis, to check the stability of high-rise building under construction. This scheme is applied to the construction sequence analysis for real high-rise building under construction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.241-244
• /
• 2008

RC 플랫 플레이트 골조는 중력저항 시스템으로 설계하고, 횡력저항 시스템인 전단벽이나 모멘트 골조를 같이 사용하는 것이 일반적이다. 그러나 지진하중과 같은 횡하중은 횡력저항 시스템의 변형을 일으키며 일체로 연결된 중력저항 시스템도 예상치 않았던 횡변위가 발생하여, 접합부에서 큰 불균형 모멘트가 발행하게 된다. 따라서 횡하중에 의해 유발된 불균형모멘트의 고려가 필요하며, �躍꼭患� 파괴를 정확하게 예측할 수 있어야 한다. 본 연구는 RC 플랫 플레이트 골조의 내진성능평가를 위하여 슬래브-기둥 접합부의 비선형 거동을 예측하기 위한 해석모델을 개발하였다. 해석모델의 검증을 위하여 중력전단비가 다른 2개의 2경간 플랫 플레이트 구조물의 실험결과와 해석모델의 결과를 비교하였다. 그 결과 개발된 해석모델은 실험체의 뚤림전단파괴 및 파괴모드를 잘 예측하는 것으로 나타났다.

• 한국지진공학회논문집
• /
• 제21권4호
• /
• pp.163-170
• /
• 2017

The need for eco-friendly building materials such as engineered wood has increased to reduce carbon emissions. Although the range and height of engineered wood buildings are gradually increasing in North America and Europe, engineered wood is mainly used for low-rise residential buildings in Korea. In order to reduce carbon emissions more, therefore, it needs to expand the use of engineered wood by applying it to various buildings with different uses or more stories. With this background, the aim of this study is to investigate the applicability of engineered wood for 9-story office buildings. Since a 9-story building with engineered wood only is not allowed in KBC, an example building has RC ordinary shear walls as the lateral force resisting system while engineered wood is only used for gravity load resisting moment frames. Another example building is also used for comparison where both lateral and gravity load resisting systems are designed by RC. The applicability of engineered wood is investigated by comparing the seismic performance and the amount of carbon emission of both buildings. The result shows that the seismic performance of both buildings was not significantly different while the amount of carbon emission of the engineered wood building was much less then the RC building. Based on this result, engineered wood is sufficiently applicable to 9-story office buildings even though it still needs to pay attention to the shear design of reinforce concrete walls.

• 국제초고층학회논문집
• /
• 제9권2호
• /
• pp.167-173
• /
• 2020

W-Project is 60-story mixed-use residential building complex project in Daegu, the third biggest city in South Korea. There are lots explorable items to be solved to secure structural safety and meet the serviceability requirements. This paper describes what kind of structural system is optimized based on the architectural requirements and structural components design and the grade of concrete strength altered on floors. The defining process of lateral resisting system of outrigger compared to the core ratio of typical plan is illustrated in detail.