• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.429-439
• /
• 2003

Counter-current two-phase flows of air- water in narrow rectangular channels with offset strip fins have been experimentally investigated in a 760 mm long and 100 mm wide test section with 3.0 and 5.0 mm gap widths. The two-phase flow regime, channel-average void fractions and two-phase pressure gradients were studied. Flow regime transition occurred at lower superficial velocities of air than in the channels without fins. In the bubbly and slug flow regimes, elongated bubbles rose along the subchannel formed by fins without lateral movement. The critical void fraction for the bubbly-to-slug transition was about 0.14 for the 3 mm gap channel and 0.2 for the 5 mm gap channel. respectively. Channel-average void fractions in the channels with fins were almost the same as those in the channels without fins. Void fractions increased as the gap width increased, especially at high superficial velocity of air. The presence of fins enhanced the two-phase distribution parameter significantly in the slug flow, where the effect of gap width was almost negligible. Superficial velocity of air dominated the two-phase pressure gradients. Liquid superficial velocity and channel gap width has only a minor effect on the pressure gradients.

• Fisheries and Aquatic Sciences
• /
• 제10권4호
• /
• pp.196-199
• /
• 2007

The spermatozoa of Leiocassis nitidus are relatively simple cells composed of a spherical head, a short midpiece, and a tail, as in most Siluriformes. The ultrastructure is characterized by the following features: Acrosome absent, as in most teleosts; around nucleus about $1.8\;{\mu}m$ long, with a deep nuclear fossa containing the proximal and distal centrioles and mitochondria. Two centrioles approximately $180^{\circ}$ from each other; 10 or more mitochondria surrounding the axoneme (with a 9+2 microtubular pattern), arranged in two layers in the postnuclear cytoplasm and separated from the axoneme by the cytoplasmic canal. Two lateral fins on the same plane as the two central microtubules; doublets 3 and 8, which are ultrastructural characteristics of the sperma tail unlike other siluroids laking the lateral fins.

• 한국수산과학회지
• /
• 제30권6호
• /
• pp.1005-1012
• /
• 1997

Fine structural changes of the germ cells during spermatogenesis in the goldeye rockfish, Sebastes thompson; were examined by means of the transmission and scanning electron microscopy. A spermatogonium has a large nucleus with a single nucleolus in the interphase. Primary spermatocytes are characterized by the formation of chromatin clumps and presence of the synaptonemal complex in the nucleus. The nucleoplasm of secondary spermatocytes is more condensed than that of primary spermatocytes, and the cytoplasm contains numerous mitochondria, endoplasmic reticulum and Golgi complex. The nuclei of spermatids in metamorphosis show sickle-like shape as the nucleoplasm becomes more condensed. In the cytoplasm of spermatids, the proacrosomal granules are not found at all. A spermatozoon consists of head, neck and tail. The acrosome is absent in the head. Four to five cytoplasmic collars are observed in the posterior portion of the head of spermatozoon. The well developed axonemal lateral fins are observed in the flagellum of spermatozoon.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.13.1-13.1
• /
• 2005

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.97-100
• /
• 2008

Various flyers in nature have attracted great interests with a recent need for developing versatile and small-size flight vehicles. In the present study, we focus on the flying fish which has been observed to glide a long distance just above a seawater surface. Since previous studies have depended on the field observation or measurement of the physical parameters only, quantitative data of the flying fish flight has not been provided so far. Therefore, we evaluate the wing performance of the flying fish in gliding flight by directly measuring the lift, drag and pitching moment on real flying fish models (Cypselurus hiraii) in a wind tunnel. In addition, we investigate the roles of wing morphology like the enlarged pectoral and pelvic fins, and lateral dihedral angle of pectoral fins. With both the pectoral and pelvic fins spread, the lift-to-drag ratio is larger and the longitudinal static stability is enhanced than those with the pelvic fins folded. From the glide polar, we find that the wing performance of flying fish is equivalent to those of medium-size birds like the petrel, hawk and wood duck. Finally, we examine the effect of water surface underneath the flying fish and find that the water surface reduces the drag and increases the lift-to-drag ratio.

• Applied Microscopy
• /
• 제28권1호
• /
• pp.39-48
• /
• 1998

동자개 정자는 구형의 두부와 짧은 중편 및 긴 편모를 가지고 있으며 비교적 그 구조가 단순하고 그 길이는 $76{\mu}m$이다. 대부분의 경골어류에서와 같이 첨체를 가지고 있지 않으며, $1.67{\mu}m$의 직경을 가진 핵에는 $1.0{\mu}m$ 정도로 깊이 함입된 핵와가 있고 그 속에 기부 및 말단 중심립이 들어있었다. 두 중심립은 서로 약 $160^{\circ}$의 각도로 배열되어 있으며, 말단부 중심립의 삼중미세소관과 핵 기부에 있는 축사의 이중미세소관 각각으로부터 부수체가 핵막을 항해 접선방향으로 배열되어 있었다. 약 20개 정도의 미토콘드리아가 중편 세포질에 2층 또는 3층으로 배열되어 있으며 축사와는 세포질관에 의해 분리되어 그 주위를 둘러싸고 있었다. 축사의 이중미세소관의 A소관에는 디네인 외완이 관찰되지 않았다. 한 쌍의 lateral fins는 중심미세소관의 축에 평행하게 측면으로 돌출되어 있는데 이것은 동자개 정자 꼬리의 특징으로서 다른 메기류에서는 보고되지 않았다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.530-533
• /
• 2010

This paper presents numerical analysis and design optimization of various turbine blade cooling techniques with three-dimensional Reynolds-averaged Navier-Stokes(RANS) analysis. The fluid flow and heat transfer have been performed using ANSYS-CFX 11.0. A fan-shaped hole for film-cooling has been carried out to improve film-cooling effectiveness with the radial basis neural network method. The injection angle of hole, lateral expansion angle of hole and ratio of length-to-diameter of the hole are chosen as design variables and spatially averaged film-cooling effectiveness is considered as an objective function which is to be maximized. The impingement jet cooling has been performed to investigate heat transfer characteristic with geometry variables. Distance between jet nozzle exit and impingement plate, inclination of nozzle and aspect ratio of nozzle hole are considered as geometry variables. The area averaged Nusselt number is evaluated each geometry variables. A rotating rectangular channel with staggered array pin-fins has been investigated to increase heat transfer performance ad to decrease friction loss using KRG modeling. Two non-dimensional variables, the ratio of the eight diameter of the pin-fins and ratio of the spacing between the pin-fins to diameter of the pin-fins selected as design variables. A rotating rectangular channel with staggered dimples on opposite walls are formulated numerically to enhance heat transfer performance. The ratio of the dimple depth and dimple diameter are selected as geometry variables.

• 대한기계학회논문집B
• /
• 제27권3호
• /
• pp.347-356
• /
• 2003

The characteristics of near wakes of circular cylinders with serrated fins are investigated experimentally using a hot-wire anemometer for various freestream velocities. Near wake structures of the fin tubes are observed using a phase average technique. With increasing fin height and decreasing fin pitch. oscillation of streamwise velocity increases. It file oscillation of lateral velocity decreases. The time averaged V-component velocity distribution of the finned tube is contrary to that of the circular cylinder due to the different strength of entrainment flow. This strength is affected by the distance of (equation omitted) = 1.0 contour lines. (equation omitted) = 1.0 contour line approaches to the wake center line when the fin density is increased. When the distance between (equation omitted) = 1.0 contour lines comes close the shear force should be increased and the flow toward the wake center line can be more strengthened because of the shear force. Factors related to the velocity recovery in the near wake of the finned tube are attributed to tile turbulent intensity, the boundary layer thickness. the position and strength of entrainment process.

• 한국어류학회지
• /
• 제21권2호
• /
• pp.81-86
• /
• 2009

한국산 동자개 Pseudobagrus fulvidraco의 정세포변형과 성숙한 정자의 미세구조를 주사 및 투과전자현미경으로 관찰하였다. 정세포변형은 측면에서 발생되는 편모, 핵의 회전, 염색물질로 채워진 핵의 함입과 핵와의 형성이 특징적이었다. 성숙한 정자의 구조는 첨체가 없는 둥근두부와 짧은중편 그리고 긴 편모로 구성되어 있었다. 짧은 중편에는 다수의 미토콘드리아가 있으며 cytoplasmic canal에 의하여 편모와 분리되어 있었다. 편모는 전형적인 9+2 구조이며 axonemal fins를 가지고 있었다. Axonemal fins는 동자개과에서 공통적으로 나타나는 형질로 여겨지며 그 외 다른 특징을 경골어류에서 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.537-541
• /
• 2003

In order to control the missiles by aerodynamics, control surfaces sometime called fins are used. Deflection angles of these fins are the right control variables of the aerodynamics, but aerodynamicists prefer to use analytic variables called aileron, elevator and rudder instead of these physical variables, because these three analytic variables dominantly influence on the roll, pitch and yaw channels of the missile maneuver, respectively, and each can be assumed a linear combination of four fin deflection angles. On that basis, roll, pitch and yaw autopilots for controlling the attitudes or lateral acceleration of the missile are designed, and as a consequence outputs of each autopilot are aileron, elevator and rudder commands, respectively. In the existing fin control scheme for the typical tail-fin controlled cruciform missiles, firstly these outputs are distributed to four fin defection commands, and after that four fins are actuated by fin controllers so that their deflections follow the commands. This paper shows that performance of such control schemes can be degraded significantly when fin actuators have certain physical constraints such as slew rate, voltage or current limit, uncertainty of actuator dynamics, and so on, and propose a new control scheme which alleviates such problems. This scheme can be widely applied to various fin actuation systems. But in this paper, for convenience, tail-fin controlled cruciform missile is taken as an example, and it is shown that a proposed control scheme gives better performance than the existing one.