• Anatomy & Biological Anthropology
• /
• v.31 no.4
• /
• pp.167-170
• /
• 2018

Axillary arch is relatively common variation of muscle in the axilla. There were several attentions on axillary arch due to its anatomical and surgical importance. During educational dissection, a variant muscle was found in right arm of 68-year-old female cadaver. The variation of muscle originated from the lateral edge of the latissimus dorsi muscle as muscular form. And then, it crossed the axillary artery and median nerve as tendinous form. Finally it became wide as muscular form and inserted into the pectoralis major. We reported this variant muscle and discussed its clinical significances.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.3
• /
• pp.261-268
• /
• 2021

Hemophilia A is a hemorrhagic disease caused by coagulation factor VIII deficiency. In head and neck cancer surgery, especially during a reconstructive one, complications can occur. These include hematomas due to bleeding which can then lead to flap ischemia, necrosis, and impaired wound healing. There are fewer cases of reconstructive surgery in patients with hemophilia A. Here in we report, a reconstructive surgery that involved mass resection, partial glossectomy (right), selective neck dissection (right, Levels I, II, III, IV), and reconstruction at the lateral arm free flap (left) in a 25-year-old man with hemophilia A. The surgery was successfully performed without any complications after pretreatment with Factor VIII concentrate, which has not been reported earlier.

• The Journal of Korean Physical Therapy
• /
• v.34 no.6
• /
• pp.317-320
• /
• 2022

Purpose: This study aimed: to confirm the balance ability of patients with spinal cord injury in the sitting state through a functional reach test using an elastic aid; and to propose a balance improvement plan. Methods: The study evaluated seven patients with spinal cord injury who could maintain a sitting posture through minimum assistance. A functional reach test was performed before and after wearing an elastic aid while sitting on a chair, and the effects before and after use of the elastic aid were compared and analyzed through a motion analyzer. Results: In the functional reach test, the forward movement distance of the hand was 97.45 mm before wearing the elastic aid, but significantly increased to 131 mm after wearing the aid (p<0.05). Corresponding forward movement distances for the shoulder were 81.26 mm and 113 mm (p<0.05 for the increase). There was no statistically significant change in lateral functional arm extension. Conclusion: It was confirmed, through a functional reach test, that trunk stability in patients with spinal cord injury increased with use of an elastic aid. In future, more efficient rehabilitation treatment programs will be possible if trunk stability in patients with spinal cord injury is improved by using elastic aids, and if various exercise treatments are also included in the rehabilitation programs.

• Structural Engineering and Mechanics
• /
• v.86 no.4
• /
• pp.503-518
• /
• 2023

In tall constructions, the outriggers are regarded as a structural part capable of effectively resisting lateral loads. This study analyses the efficacy of hybrid outrigger system in high rise RCC building for various structural parameters identified. For variations in α, which is defined as the ratio of the relative flexural stiffness of the core to the axial rigidity of the column, static and dynamic analyses of hybrid outrigger system having a virtual and a conventional outrigger at two distinct levels were conducted in the present study. An investigation on the optimal outrigger position was performed by taking the results from absolute maximum inter storey drift ratio (ISD_max), roof acceleration (acc_roof), roof displacement (disp_roof), and base bending moment under both wind and seismic loads on analytical models having 40, 60 and 80 storeys. An ideal performance index parameter was introduced and was utilized to obtain the optimal position of the hybrid outrigger system considering the combined response of ISD_max, acc_roof, disp_roof and, criteria required for the structure under wind and seismic loads. According to the behavioural study, increasing the column area and outrigger arm length will maximise the performance of the hybrid outrigger system. The analysis results are summarized in a flowchart which provides the optimal positions obtained for each dependent parameter and based on ideal performance index which can be used to make initial suggestions for installing a hybrid outrigger system.

• Anatomy and Cell Biology
• /
• v.57 no.1
• /
• pp.18-24
• /
• 2024

The origin and distribution of median nerve varies among the different individuals. The median nerve variations in axillary region were reported by many authors previously. Understanding of these variations is especially necessary for clinicians to prevent iatrogenic nerve damage. The current work aimed to evaluate the possible anatomical variations of median nerve in the axillary region in a sample of the Iranian cadavers (Shiraz, Fars). We dissected 26 upper limbs from 13 male cadavers to investigate the different variations of median and musculocutaneous nerves according to Venieratos and Anagnostopoulou classification. In 23.07% of specimens (n=6), the medial root united with 2 lateral roots and formed the median nerve proximal to the coracobrachialis muscle. In one case, a communicating branch separated from the musculocutaneous nerve distal to the coracobrachialis and connected to the median nerve in upper arm. Our results suggest that there are anatomical variations of the median nerve in terms of its origin and its communication with the musculocutaneous nerve in the population of southern Iran. The anatomical knowledge of the median nerve variations is important for clinicians to improve patient health outcome. Theses variations of the median nerve should be considered during surgical procedures of the axillary region and nerve block of the infra clavicular part of the brachial plexus.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.2
• /
• pp.237-247
• /
• 2020

Objective : Fixation of the C1-2 segment is challenging because of the complex anatomy in the region and the need for a high degree of accuracy to avoid complications. Preoperative 3D-computed tomography (CT) scans can help reduce the risk of complications in the vertebral artery, spinal cord, and nerve roots. However, the patient may be susceptible to injury if the patient's anatomy does not match the preoperative CT scans. The intraoperative 3D image-based navigation systems have reduced complications in instrument-assisted techniques due to greater accuracy. This study aimed to compare the radiologic outcomes of C1-2 fusion surgery between intraoperative CT image-guided operation and fluoroscopy-guided operation. Methods : We retrospectively reviewed the radiologic images of 34 patients who underwent C1-2 fusion spine surgery from January 2009 to November 2018 at our hospital. We assessed 17 cases each of degenerative cervical disease and trauma in a study population of 18 males and 16 females. The mean age was 54.8 years. A total of 139 screws were used and the surgical procedures included 68 screws in the C1 lateral mass, 58 screws in C2 pedicle, nine screws in C2 lamina and C2 pars screws, four lateral mass screws in sub-axial level. Of the 34 patients, 19 patients underwent screw insertion using intraoperative mobile CT. Other patients underwent atlantoaxial fusion with a standard fluoroscopy-guided device. Results : A total of 139 screws were correctly positioned. We analyzed the positions of 135 screws except for the four screws that performed the lateral mass screws in C3 vertebra. Minor screw penetration was observed in seven cases (5.2%), and major pedicle screw penetration was observed in three cases (2.2%). In one case, the malposition of a C2 pedicle screw was confirmed, which was subsequently corrected. There were no complications regarding vertebral artery injury or onset of new neurologic deficits. The screw malposition rate was lower (5.3%) in patients who underwent intraoperative CT-based navigation than that for fluoroscopy-guided cases (10.2%). And we confirmed that the operation time can be significantly reduced by surgery using intraoperative O-arm device. Conclusion : Spinal navigation using intraoperative cone-beam CT scans is reliable for posterior fixation in unstable C1-2 pathologies and can be reduced the operative time.

• Journal of Acupuncture Research
• /
• v.17 no.3
• /
• pp.125-139
• /
• 2000

Study of the fourteen meridians that include name of P'ung(風) point. The results were summarized as follows. 1. Pyongp'ung(秉風) is located middle of the supraspinatous fossa(Small intestine Meridian, 手太陽小腸經). we can cute the local area disease and also use to cure the pathway of the Arm greater yang small intestine which is attacked by P'ung(風) disease. 2. Yep'ung(翳風) is located behind the lobule of the auricle, in the depression between the mastoid process and the mandible(Triple Energizer Meridian, 手少陽三焦經). we can cure the local area disease especially hyper yang disease and also use to cure the pathway of the Arm lesser yang triple energizer which is attacked by P'ung(風) and Yo'l(熱) disease. 3. P'ungmun(風門) is located 1.5 chon beside the lower end of the spine of the second thoracic vertebra(Bladder Meridian, 足太陽膀胱經). we can cure the local area disease and also use to cure the pathway of the Leg greater yang bladder which is attacked by P'ung(風) disease. 4. P'ungbu(風府) is located 1 chon above the middle of natural line of the hair at the back of the head, in the depression below the occiptal protuberance(Governor meridian, 督脈). It connects (Liver meridian, 足厥陰肝經) and Yin Link Vessel(陽維脈). we can cure the rigidity and pain in head and nape which is related Yin Link Vessel(陽維脈). 5. P'ungshi(風市) is located on the lateral part of the thigh, 7 hon above the patella(From the greater trochanter to the knee joint is 19 chon, Gallbladder Meridian (足少陽膽經). we can cure the local area disease(leg, knee, etc). 6. P'ungji(風池) is located Below the occipital bone, in the depression on the outer part of the trapezius muscle(Gallbladder Meridian, 足少陽膽經) on a level with P'ungbu(風府) (Governor vessel, 督脈). we can cure the local area disease and also use to cure the pathway of the Leg lesser yang gall bladder which is attacked by P'ung(風) disease.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1153-1163
• /
• 2015

The purpose of this study is to investigate the effects of task-oriented activities on hand functions in patients with hand injuries. From December 2011 to October 2012, sixteen patients with hand injuries at C Hospital in Changwon, Gyeongsangnam-do, Korea were randomly divided into two groups. One group was subjected to task-oriented activity and the other to general exercise. Two groups performed each activity once a day, three times a week, for four weeks. The group with the task-oriented activities was provided with the tasks according to subject-preference based on the result of Canadian Occupational Performance Measure (COPM). To verify the effect of intervention, the following hand function measures were used: grip strength, pinch strength, and the range of opposition and abduction, Purdue pegboard test and Disabilities of the Arm, Shoulder and Hand (DASH). Both groups showed significant increase in all of the hand function measures after 4-week activities(p<.05). The task-oriented activity group was significantly different from the control group in powers for tip pinch, lateral pinch and three-jaw chuck pinch, Purdue pegboard test and DASH(p<.05) except in grip strength and the range of opposition and abduction suggesting better improvement in hand functions. This study shows that task-oriented activities improve the hand functions more effectively in patients with hand injuries.

• The Journal of Korean Physical Therapy
• /
• v.17 no.4
• /
• pp.537-557
• /
• 2005

The purpose of this study was to investigate the effect of pelvic traction and muscle energy technique(MET) for hemiplegic patients on static standing balance. The scale for static standing balance is measured by using mean balance(%), frequence(Hz), sway area($mm^2$), sway path(mm), max sway velocity(mm/s), ant/post sway angle($^{\circ}$), lateral sway angle($^{\circ}$), sway number, change of pelvic height is measured in relation to the height of ASIS and PSIS. The subjects of this study were thirty hemiplegic patients: 15men and 15 women, with an average ages of 50.80 years. The thirty subjects were divided into 3 group of 10 at random ; ten subjects had pelvic traction after bobath therapy (the pelvic traction group), ten subjects had muscle energy technique after bobath therapy (the MET group), and ten subjects had only bobath therapy (the control group). Static standing balance was measured using BPM (balance performance monitor; data print software version 5.3), pelvic height was measured using height measuring with an adjustable horizontal arm. In order to assure the statistical significant of the result, an one-way ANOVA, the paired t-test, and a person's correlation were applied at the.05 level of significance. The results of this study were as follows: 1) The change in pelvic height were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 2) The change in affected and non-affected on weight bearing were not statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p>.05). 3) The change in frequency were statistically significant between the MET group, the control group and the pelvic traction group on pre-treatment and post-treatment(p<.05). 4) The change in sway area were statistically significant between the MET group, the control group and the pelvic traction group on pre-treatment and post-treatment(p<.05). 5) The change in sway pa1h were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 6) The change in max sway velocity were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 7) The change in ant/post sway angle were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 8) The change in lateral sway angle were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 9) The change in sway number were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). In conclusion, there was a difference between the experimental group and the control group. In the future, we have to study continuously about pelvic traction and muscle energy technique in hemiplegic patients.

• Fashion & Textile Research Journal
• /
• v.22 no.3
• /
• pp.368-377
• /
• 2020

This study provided basic data to develop functional and fitness cycling wear for cyclists. We analyzed the domestic and overseas cycling wear brand patterns for tops and tights as well as compared pads attached to tights. The results were as follows. The tops of the cycling wear were designed with cutting lines in the lateral or yoke in the back to reflect cycling posture. It is necessary to study if there is a difference in the air resistance or fitness of the athlete. The sleeve hem band affected by arm movement during cycling, proper sewing and band pressure are also important. The tights have a brand that does not insert a band in front of the waist in consideration of the cyclist's breathing. It should take into account methods of constructing a proper garment pressure that does not interfere with cycling. Analyzing the cycling pad indicated that the three-dimensional shape and size of the pad show many differences for each brand, indicating a difference in cycling movement suitability. In addition, many of the cutting lines should account for the productive aspects because of the high consumption of the fabric in order to design a pattern considering the cycling posture.