• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.903-909
• /
• 2023

The purpose of this study is to compare and analyze the effect of changes in the patient's central position on the exposure dose and image quality of surrounding organs during a chest lateral examination using an Auto Exposure Control(AEC). The experiment was conducted on a human body phantom. A needle was attached to the lower part of the center of the coronal plane of the phantom, and a lead ruler was attached to the lower part of the detector so that the 50 cm point was located at the lower center of the AEC ion chamber. The exposure conditions were 125 kVp, 320 mA, the distance between the source and the image receptor was 180 cm, and the exposure field size was 14 × 17 inches. Only one AEC ion chamber was used at the bottom center, and the density was set to '0' and sensitivity to 'Middle', and the central X-ray was incident vertically toward the 6th thoracic vertebra. With AEC mode applied, the 50 cm point of the needle and lead ruler were aligned and the phantom was moved 5 cm toward the stomach (F5) and 5 cm toward the back (B5), and the dose factor was analyzed by measuring ESD. The ESD of the thyroid gland according to the change in patient center position was 232.60±2.20 μGy for Center, 231.22±1.53 μGy for F5, and 184.37±1.19 μGy for B5, and the ESD of the breast was 288.54±3.03 μGy for Center, F5 was 260.97±1.93 μGy, B5 was 229.80±1.62 μGy, and the ESD of the center of the lung was 337.02±3.25 μGy for Center, F5 was 336.09±2.29 μGy, and B5 was 261.76±1.68 μGy. As a result of comparing the average values of dose factors between each group, the difference in average values was statistically significant (p<0.01), and each group appeared to be independent. As a result of the study, there was no significant difference in the dose to the thyroid, breast, and center of the lung according to the change in the patient's central position, except for the breast (10%) when the patient moved forward about 5 cm. However, movement of about 5 cm posteriorly resulted in an average dose reduction of 23.7%. Additionally, when the patient's central position was moved to the rear, image quality deteriorated.

• Journal of Radiation Protection and Research
• /
• v.24 no.4
• /
• pp.195-203
• /
• 1999

It is difficult to determine dosimetric characteristics for small field photon beams since such small fields do not achieve complete lateral electronic equilibrium and have steep dose gradients. Dosimetric characteristics of small field 4, 6, and 10 MeV photon beams have been measured in water with a diamond detector and compared to measurements using small volume cylindrical and plane parallel ionization chambers. Percent depth dose (PDD) and beam profiles for 6 and 10 MeV photon beams were measured with diamond detector and cylindrical ion chamber for small fields ranging from $1{\times}1\;to\;4{\times}4cm^2$. Total scatter factors($S_{c,p}$) for 4, 6, and 10 MeV photon beams were measured with diamond detector, cylindrical and plane parallel ion chambers for small fields ranging from $1{\times}1\;to\;4{\times}4cm^2$. The $S_{c,p}$ factors obtained with three detectors for 4, 6, and 10 MeV photon beams agreed well ($\pm1.2%$) for field sizes greater than $2{\times}2,\;2.5{\times}2.5,\;and\;3{\times}3\;cm^2$, respectively. For smaller field sizes, the cylindrical and plane parallel ionization chambers measure a smaller $S_{c,p}$ factor, as a result of the steep dose gradients across their sensitive volumes. The PDD values obtained with diamond detector and cylindrical ionization chamber for 6 and 10MeV photon beams agreed well ($\pm1.5%$) for field sizes greater than $4{\times}4\;cm^2$. For smaller field sizes, diamond detector produced a depth-dose curve which had a significantly shallower falloff than that obtained from the measurements of relative depth-dose with a cylindrical ionization chamber. For the measurements of beam profiles, a distortion in terms of broadened penumbra was observed with a cylindrical ionization chamber since diamond detector exhibited higher spatial resolution. The diamond detector with small sensitive volume, near water equivalent, and high spatial resolution is suitable detector compared to ionization chambers for the measurements of small field photon beams.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.205-218
• /
• 2004

The aims of this study were to investigate the differences in the early craniofacial morphology of Class III malocclusions with good, fair and poor occlusal stability and to elucidate a key determinant for distinguishing the cases. Lateral cephalograms of 30 subjects with Class III malocclusion in the mixed dentition were analyzed at the start of treatment (mean age of $8.58\pm1.47$). All subjects were reevaluated after a mean period of $7.50\pm1.94$ years comprising active treatment and retention. At this time, the samples were divided into three groups: good (10 subjects), fair (10 subjects) and poor (10 subjects) occlusal stability groups. According to the results of ANOVA, there were significant morphological differences in the early stage among the good, fair and poor occlusat stability groups, especially in variables that represented the vertical skeletal relationships. As well, there were already more dental compensations in the poor occlusal stability group. Stepwise discriminant analysis on the measurements at the time of first observation identified only one predictive variable: AB to mandibular plane angle(AB-MP). With this discriminant function, $83.3\%$of the original grouped cases were correctly classified and the canonical correlation coefficient was 0.857. In conclusion, AB-MP can be a possible predictor for the eventual prognosis of early Class III treatment. If it is below 60, the prognosis of early Class III treatment is expected to be poor, while if it is above 65, a good prognosis is expected.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.41-49
• /
• 2003

This study examined the relations between degree of posterior dental compensation and skeletal discrepancy in Class III malocclusion. The pretreatment lateral cephalogras and dental casts of 87 skeletal Class III adults were selected to provide a random sampling of skeletal Class III malocclusion. Skeletal discrepancy was described with ANB angle, Wits appraisal, SN-Mn plane angle, FMA and ratios of basal arch width. Degree of posterior dental compensation was described with maxillary intermolar angle, mandibular interolar angle and sum of intermoloar angle. The relationships between skeletal discrepancy and degree of posterior dental compensation were analyzed with simple correlation analysis, stepwise multiple regression analysis. The results were as follows 1. A strong association was found between the variation in the anteroposterior measure, ANB angle and the variation of posterior dental compensation measures, sum of intermolar angle and mandibular intermolar angle in skeletal Class III malocclusion. 2. There was no statistically significant relationship between the variation in the vertical measures and the variation of posterior dental compensation measures in skeletal Class III malocclusion. 3. There was no statistically significant relationship between the variation in the anteroposterior and vortical measures and degree of basal arch width discrepancy.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.1
• /
• pp.185-199
• /
• 1999

The purpose of the present study was to investigate craniofacial patterns in Korean male and female adults, and to compare morphologic differences between different facial types. In order to get configurational groupings, standardized lateral and P-A cephalograms of 174 Korean adults were measured and analyzed with seven angular, nineteen linear, four ratio, and two index measurements. Ward's minimum variance cluster analysis was employed to divide the sample into groups having similar craniofacial morphology, and thereafter, inductive statistics(t-test) was used to characterize morphologic differences of the divided groups. And also, Pearson correlation coefficients were calculated to assess correlation between the cranial dimensions and upper/lower anterior facial height(UAFH, LAFH) in each facial types for both male and female The results were as follows; 1. There existed sexual dimorphism in most of variables except SN-FH angle, palatal plane angle, facial axis angle, facial index, lower anterior facial height ratio and upper facial height ratio. 2. A brachycephalic headform ($0.84{\pm}0.05$) with leptoprosopic facial form ($0.92{\pm}0.05$) was appeared in male, and a mesocephalic headform ($0.86{\pm}0.06$) with leptoprosopic facial form ($0.92{\pm}0.04$) was exhibited in female. 3. Facial types in both male and female subjects were divided into two groups, Group A (mesoprosopic facial type) and Group B (leptoprosopic facial type). The morphologic differences between Group A and Group B were as follows: a. Cranial measurements including index, angular and linear measurements were not found to be different between Group A and Group B in both sexes. b. Increased UAFH, LAFH, and upper/lower anterior dental heights were exhibited in Group Bs of both male and female. c. In both male and female, ramus height and mandible length showed no difference between Group A and Group B. However, genial angle was found to be larger in Group B than Group A. Therefore, the morphologic differences between two groups in male and female were closely related to less favorable anatomic morphology of the mandible. 4. LAFH and UAFH showed no relationships with cranial dimensions in male and female.

• The korean journal of orthodontics
• /
• v.40 no.2
• /
• pp.77-86
• /
• 2010

Objective: The purposes of this study were to evaluate the reproducibility and reliability of head posture obtained by registering outer canthus as a soft tissue landmark with the Outer Canthus Indicator (OCI). Methods: Twenty-one adults with normal facial morphology were enrolled in this study (mean age $27.5\;{\pm}\;1.72$ years). To register initial head posture, height of the outer canthus from the ear rod plane was measured using OCI. Head posture was reproduced by moving the head upwards and downwards until the outer canthus was in a straight line with the indicator set at a registered height. After the head posture is reproduced by two operators after two days, lateral photographs were taken. Computerized photometric analyses of the photographs were performed. Results: The head rotations around the transverse axis were $0.69\;{\pm}\;0.43^{\circ}$, $0.98\;{\pm}\;0.65^{\circ}$ from each of the two operators. Standard errors were $0.09^{\circ}$ and $0.14^{\circ}$ each, which were similar to results from past research findings. There were no significant differences between the data from the two operators (p > 0.05). There were no correlations between the head rotation around the horizontal and vertical axes (p > 0.05). Conclusions: The present study suggests that OCI-registered head posture may minimize errors from vertical head rotation in cephalometry and photometry.

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.303-315
• /
• 1999

The aim of this study was to evaluate the morphology of the mandibular symphysis and anterior alveolar and skeletal relationship under the influence of the rotational growth pattern of mandible in skeletal Class III malocclusion. A total of U untreated adult subjects were divided into two groups-forward rotational growth pattern group, backward rotational growth pattern group-according to the suggestion of Skieller et al.. The antero-posterior position, vertical relationship, mandibular symphysis and anterior alveolar and skeletal relationship were assessed on lateral cephalometric radiographs. Mandibular symphysis and anterior alveolar and skeletal relationship in each subject were studied and the following conclusions were drawn : 1. Concerning the antero-posterior position, forward rotational growth pattern group showed significantly larger SNA, SNB. Conceming the vertical relationship, all measurements showed statistically significant differences. 2. Forward rotatioal growth pattern group showed significantly larger IMPA, MnAD, backward rotational growth pattern group showed significantly larger MxABH. 3. There was no statistically significant difference in symphysis ratio to mandibular plane between forward and backward rotational growth pattern group. 4. In the correlative analysis of rotational growth pattern of mandible and mandibular symphysis, anterior alveolar and skeletal relationship, statistically significant correlations in overbite, IMPA, MnAD, symphysis width were showed.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.796-803
• /
• 2002

T-shaped walls have different strength, stiffness and ductility in the two opposite directions parallel to the web when subjected to horizontal in-plane loads. When the flange is in tension, the extent that the flange reinforcement contributes to the flexural strength will be subjected to shear-lag effect. Because of this shear-lag effect, the flange may not participate fully in the action with the web, and the effective flange width is needed for predicting the actual strength and stiffness of structures. The objective of this paper is to evaluate the effective flange width and actual strength of the T-shaped wall with Korean code specified detailing of the wall web. Three specimens were tested with cyclic lateral loading applied at top of the wall. A constant axial load of approximately 0.1f$\_$ck/$.$A$\_$g/ is maintained during the testing. Test results show that the effective flange width increases with increasing drift level, such that the entire overhanging flange of h/3 is effective at the maximum strength level. Therefore, the use of PCI or KBC(Korean Building Code) value of h/10 is unconservative with respect to detailing at the wall web boundary.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.1
• /
• pp.23-27
• /
• 2007

Purpose: Scarf osteotomy can provide the simultaneous correction of the hallux valgus angle (HVA), 1-2 intermetatarsal angle ($IMA_{1-2}$), DMAA and the plantar displacement of the fragment. The study was conducted to understand the multi-dimensional correction of the hallux valgus. Materials and Methods: Fourty eight patients who had undergone Scarf osteotomy with hallux valgus at more than $30^{\circ}$ of HVA and more than $15^{\circ}$ of $IMA_{1-2}$ were studied. Before an osteotomy, a reference K-wire was inserted to the 1st metatarsal head. After the osteotomy, the plantar fragment was moved laterally and the proximal end of the fragment was forced beyond the distal end which resulted in an internal rotation of the head fragment to correct the DMAA. Results: The HVA improved an average of $33.3^{\circ}$ to $7.7^{\circ}$ with the IMA1-2 respectively from $15.4^{\circ}$ to $6.5^{\circ}$. The DMAA improved an average of $19.5^{\circ}$ ($5.2-30.9^{\circ}$) to $4.5^{\circ}$ ($0.4-13.8^{\circ}$). By checking the angle, which was at an average of $25^{\circ}$ between the plantar surface of the foot and the osteotomy plane, the average distance of 1.9 mm (1.18-3.1 mm) of plantar displacement was measured using the value of sine (sin 25 = 0.422). Conclusions: It is possible to correct the HVA, IMA1-2 and DMAA simultaneously with one osteotomy making the lateral shift, the internal rotation and the plantar displacement of the plantar head fragment as desired. Despite the technicality and difficulty of the Scarf osteotomy, once familiarized through myriad procedures, all disadvantages are outweighed by the success and satisfaction of both patient and surgeon.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.248-261
• /
• 1999

In order to define a current set of Korean children norm with mixed dentition, following study was done. The subjects were 102 healthy dentition contestants(48boys, 54girls). Standardized lateral head roentgenograms were taken, and Ricketts analysis was done. Results were as follows: 1. Length of anterior cranial base, posterior facial height, corpus length were longer in male than in female(p<0.05), and Porion was located posteriorly in male than in female(p<0.01). 2. Through facial depth, Pogonion of male was more forwardly positioned(p<0.05), mandible was significantly steeper in female, and maxillary anterior teeth were significantly tipped forward in male(p<0.05). 3. Variables such as length of anterior cranial base, upper molar position(p<0.01) and corpus length(p<0.05) were significantly changed by age. 4. Maxillary height, facial depth, mandibular plane angle, convexity were changed by age, but not significantly(p>0.05).