• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.247-261
• /
• 1995

The purpose of this study was to quantitate differences in the nature of the correction of Angle's Class II div 1 malocclusion dependent on the patient's age at the time of treatment. The sample consisted of 27 female patients in the adolescent group with a mean initial records age of 11.8 years and 25 female patients in the adult group with a mean starting age of 21.1 yrs. Lateral cephalometric head films were taken before and after orthodontic treatment with four bicuspid extraction. The results were obtained as follows. 1. None of maxillary skeletal parameters exhibited a significantly different in treatment change between adolescents and adults. But, in mandibular skeletal measurements, there were significant differences between two groups. (P<0.05) 2. Measures of vertical dimension in the adults remained unchanged during treatment, reflecting the effective absence of growth. 3. The steepness of occlusal plane in the adults changed significantly.(P<0.05) In contrast, the adolescents displayed stability of the occlusal plane. 4. According to the Johnston analysis, there was a significant difference in the total molar correction between two groups.(P<0.05) 5. According to the Johnston analysis, differential mandibular growth in the adolescents contrubuted $63\%$ of the total molar correction, with orthodontic tooth movement accounting for the remaining $37\%$. In the adults, dental movement comprised $99\%$ of the correction.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.61-71
• /
• 2009

Anchorage control is important in orthodontic treatment. Recently miniscrew is widly used as maximum anchorage in orthodontic treatment, and then it is important to install miniscrew safely without damaging adjacent anatomic structure. In a view of Miniscrew's stability, maxilla is unfavorable than mandible, and moreover maxillary soft buccal bone has disadvantage on stability. so palatal area comes into notice for installation area. We measured distance between palatal roots and bone thickness at midpalatal area using 3D computed tomography, and have found following results. 1. On the comparison of distance between palatal roots, the distance between 2nd premolar and 1st molar was significantly longest and the distance between premolars was significantly shortest. 2. Going toward lateral area from midpalatal suture and posterior area from zero point, bone thickness significantly became shorter and shorter. And 5.0mm palatal sagittal plane has more significance decrease of bone thickness than 2.5mm palatal sagittal plane. According to these results, we can conclude that the palatal installation of miniscrew between 2nd premolar and 1st molar is safest. And it is more safe that comes closer to midpalatal suture and to anterior area in regard to incisive canal.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.3
• /
• pp.319-329
• /
• 2000

Prediction of the soft tissue changes following hard tissue movement is very important from the esthetic view point for patients who have orthognathic surgery. There are many cephalometric analysis of facial bone and soft tissue on the lower lip and chin region but few soft tissue analysis on the midface after mandibular setback surgery. This study was performed to obtain whether the mandibular posterior movement has influence on the midface and the predictable ratio of post-operative measurement values of the soft tissue changes following mandibular setback surgery. Fifteen patients (8 males and 7 females) who had undergone mandibular setback surgery were selected and analyzed the soft tissue movement on the upper lip and the cheek region. Post-operative changes of the soft tissue measurements after mandibular surgery were examined on pre- and post-operative cephalometrics and the ratio of changes were analyzed after drawing the reference line on the face with the barium sulfate solution. The reference lines were perpendicular to the intercanthal line from infraorbital foramen and lateral canthus. The results obtained were as follows : 1. There were tendancy of anterior movement of soft tissue adjacent the nose after mandibular surgery 2. There were incerased tendancy of the amount of anterior movement from the nasal crease to the cheek region. 3. The amount of anterior movement of the soft tissue was larger below the palatal plane compared with above the palatal plane in the cheek region. 4. The upper lip length was increased and moved posterior direction after mandibular setback surgery 5. The lower lip was moved posterior direction by posterior movement of the mandibular structure 6. Soft tissue of the midface around the nose moved anterior direction after mandibular setback surgery but there was no correlation between the amount of mandibular setback and the amount of the soft tissue changes

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.21-33
• /
• 1997

The purpose of this study was to investigate the factors affecting the postsurgical mandibular stability for both one- and two jaw surgery. 18 for one-jaw surgerys and 24 for two-jaw surgerys among skeletal class III malocclusion patients who experienced orthodontic treatment and orthognathic surgery at Pusan National University Hospital were selected. Lateral cephalograms taken at the first visit, after presurgical orthodontic treatment, immediately after surgery and follow-up over 6 months, were traced. Based ANOVA, multiple linear regression analysis was completed for one-jaw surgery with postsurgical stability as the criterion and the magnitude of mandibular setback, the change of mandibular incisor height during surgery, the changes of mandibular plane angle and mandibular incisor angle during presurgical orthodontic treatment as affecting factors. Same analysis was completed for two-jaw surgery with postsurgical stability as the criterion and the magnitude of mandibular setback as affecting factor. The results were as follows : 1. In the one-jaw surgery cases, the magnitude of mandibular setback, the change of mandibular incisor height during surgery, the changes of mandibular plane angle and mandibular incisor angle during presurgical orthodontic treatment explained the variability in postsurgical stability with a significant $R^2$ value of 0.84. 2. In the two-jaw surgery cases, the magnitude of mandibular setback explained the variability in postsurgical stability with a significant $R^2$ value of 0,28.

• The Journal of Korean Medicine
• /
• v.40 no.3
• /
• pp.198-223
• /
• 2019

Objectives: The purpose of this study was to investigate the effect of Korean medicine treatment on facial asymmetric treatment in 5 cases of facial asymmetry correction by non - surgical treatment such as acupucture, chuna treatment, FCST (Functional cerebrospinal technique) and cranial osteopathy. Methods: We analyzed the initial charts of 5 patients who had undergone facial asymmetry in a Korean medicine clinic and measured the position and distance using the photograph, lateral cephalograms, and whole body radiograms. The results were as follows. Results: To quantify both soft and hard tissues to confirm the results of Korean medicine treatment of facial asymmetry, soft tissues quantitatively measure the displacement of the face, the slope of the left and right eyes, and the slope of the lip in order to grasp the positional displacement of the mandible. As a result, on the average, the correction effect as measured by the angle difference between A and C is $1.8{\pm}0.57$, the correction effect as measured by the angle difference between B and C is $1.4{\pm}0.89$, and the angle difference between D and the horizontal plane is $1.9{\pm}0.89$, and the angle difference between E and the horizontal plane is $1.9{\pm}0.89$. The result of reduced angle difference between A and C means that the head position shifted from the center of the body to the unilateral side was shifted to the center. The decrease in the angle difference between B and C means the restoration of the maxillary distortion relative to the mandible. In hard tissues, numerical values were measured based on the skull standard. The average distortion of the skull was $1.9{\pm}0.67$, and the distortion of the lower eye was $1.4{\pm}0.41$. Conclusion: General studies on facial asymmetric treatment are limited to treatments such as surgery and orthodontics. However, this study confirmed the possibility that facial asymmetry could be corrected by Korean medical treatment consisting of reversible non-surgical treatment rather than irreversible treatment such as surgery or orthodontic treatment. In particular, Korean medicine treatment is effective for muscular asymmetry, soft asymmetry, functional asymmetry, etc. The facial asymmetric treatment of Korean medicine is not limited to the face-centered correction, but the asymmetry of the whole body may be corrected as well.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.293-299
• /
• 2018

Steel truss outriggers can be replaced by reinforced concrete walls to control the lateral drift of tall buildings. When reinforced concrete outrigger walls are connected to perimeter columns, not only axial forces but also shear forces and moments can be induced on the perimeter columns. In this study, the shear force of the perimeter column due to the rotation of the outer edge of the outrigger wall is derived as analytic equations and the result is compared with the finite element analysis result. In the finite element analysis, the effects of connecting beams at each floor and the effect of modeling shear walls and outriggers with beam element and plane stress element was analyzed. The effect of the connecting beam was almost negligible and the plane stress element was determined to have greater stiffness than the beam element. The inter-story rotation and the shear force of the perimeter column due to the rotation of the outer edge of the outrigger wall was considerably smaller than the allowable value. Therefore, even if the outrigger wall made of reinforced concrete is applied to a tall building, it is considered that there is no need to study the shear force and moment induced in the perimeter columns.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.125-132
• /
• 2019

This paper presents a seismic reliability analysis method for an offshore wind turbine with a twisted tripod support structure under earthquake loading. A three dimensional dynamic finite element model is proposed to consider the nonlinearity of the ground-pile interactions and the geometrical characteristics of the twisted tripod support structure where out-of-plane displacement occurs even under in-plane lateral loadings. For the evaluation of seismic reliability, the failure probability was calculated for the maximum horizontal displacement of the pile head, which is calculated from time history analysis using artificial earthquakes for the design return periods. The application of the subset simulation method using the Markov Chain Monte Carlo(MCMC) sampling is proposed for efficient reliability analysis considering the limit state equation evaluation by the nonlinear time history analysis. The proposed method can be applied to the reliability evaluation and design criteria development of the offshore wind turbine with twisted tripod support structure in which two dimensional models and static analysis can not produce accurate results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.84-91
• /
• 2022

This study investigated the behavior of out-of-plane skewed moment connections that were designed as IMFs, as per the Korean standards. A total of 14 finite element models were constructed with the consideration of two types (single- and double-sided connections) and four levels of skew angle (0°, 10°, 20°, and 30°). The results indicated that the skewed connections considered in this study met the acceptance criteria for IMFs given by the codes. However, the load-carrying capacities of skewed connections were decreased as the skew angle increased. For the connection with a skew angle of 30°, the peak load was noted to be 13% less and the energy dissipation capacity could be 26% less than that of non-skewed connection. In addition, because of the skewed nature, the stress distribution in the skewed beam flange near the connection was asymmetric and the stresses were concentrated on the beam inner flange. Column twisting induced by the skewed configuration was very small and negligible in the beam and column combination considered in this study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.4
• /
• pp.414-424
• /
• 2021

The purpose of this retrospective study was to evaluate the skeletal and dental maturity according to the vertical facial type and sex in Korean children in the developmental stage. In total, 184 participants aged 8 - 14 years were selected and divided into three groups based on the mandibular plane angle. For the comparison between the sexes, the three groups were each divided into male and female subgroups. The skeletal and dental maturity were assessed using lateral cephalograms, hand-wrist radiographs and panoramic radiographs. The vertical growth group showed significantly greater cervical vertebral and hand-wrist maturity than that in the horizontal growth group. Dental maturity was the highest in the vertical growth group. Girls showed greater skeletal maturity than boys, and no distinct difference was observed between the dental maturity of the sexes. Analysis of the vertical facial type in children can provide ancillary indicators that may help determine the optimal timing for orthodontic treatment initiation. Earlier initiation of orthodontic treatment may be considered for patients with vertical facial growth patterns.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.85-94
• /
• 2022

This retrospective study aimed to evaluate the difference in measurement between conventional orthodontic analysis and artificial intelligence orthodontic analysis in pediatric and adolescent patients aged 7 - 15 with the mixed and permanent dentition. A total of 60 pediatric and adolescent patients (30 mixed dentition, 30 permanent dentition) who underwent lateral cephalometric radiograph for orthodontic diagnosis were randomly selected. Seventeen cephalometric landmarks were identified, and 22 measurements were calculated by 1 examiner, using both conventional analysis method and deep learning-based analysis method. Errors due to repeated measurements were assessed by Pearson's correlation coefficient. For the mixed dentition group and the permanent dentition group, respectively, a paired t-test was used to evaluate the difference between the 2 methods. The difference between the 2 methods for 8 measurements were statistically significant in mixed dentition group: APDI, SNA, SNB, Mandibular plane angle, LAFH (p < 0.001), Facial ratio (p = 0.001), U1 to SN (p = 0.012), and U1 to A-Pg (p = 0.021). In the permanent dentition group, 4 measurements showed a statistically significant difference between the 2 methods: ODI (p = 0.020), Wits appraisal (p = 0.025), Facial ratio (p = 0.026), and U1 to A-Pg (p = 0.001). Compared with the time-consuming conventional orthodontic analysis, the deep learning-based cephalometric system can be clinically acceptable in terms of reliability and validity. However, it is essential to understand the limitations of the deep learning-based programs for orthodontic analysis of pediatric and adolescent patients and use these programs with the proper assessment.