• 제목/요약/키워드: Lateral Earth Pressure at Rest

검색결과 15건 처리시간 0.035초

지중에 매설된 박스구조물에 작용하는 토압 산정 (Estimation of Earth Pressures Acting on Box Structures Buried in Ground)

  • 홍원표;윤중만;송영석
    • 한국지반신소재학회논문집
    • /
    • 제14권2호
    • /
    • pp.23-33
    • /
    • 2015
  • 개착식 터널공법으로 시공된 지하철 건설현장을 대상으로 각종 계측시스템을 적용하여 지하 박스구조물에 작용하는 토압을 측정하였다. 이를 토대로 기존 이론식으로 산정된 측방토압과 현장에서 계측된 실측토압을 비교 검토하고, 실제 지하구조물에 작용하는 토압분포를 조사하였다. 조사결과에 의하면 지하 박스구조물에 작용하는 연직토압은 주로 성토고에 큰 영향을 받고 있으며, 측방토압은 흙막이구조물(버팀보, 흙막이벽)의 존치여부에 큰 영향을 받는 것으로 나타났다. 현장에서 측정된 지하 박스구조물 상단에 작용하는 연직토압은 Bierbaumer의 이론토압에 가장 근사하게 나타나고 있으며, 측방토압은 정지토압보다 주동토압에 가깝게 작용하고 있다. 그리고, 토압계수는 토사층의 경우 평균 0.35정도로 나타났으며 연암층의 경우 평균 0.21정도로 토사층에서 크게 나타나고 있다. 따라서, 지하 박스구조물이 토사층에 설치되는 경우, 지하 박스구조물에 작용하는 측방토압은 정지토압보다는 주동토압과 정지토압의 평균치를, 암반층에 설치되는 경우에는 주동토압을 사용하는 것이 보다 합리적이라고 판단된다.

정지토압계수 측정에 관한 연구 II (A Study on Measuring the Coefficient of Earth Pressure at Rest II)

  • 송무효
    • 한국해양공학회지
    • /
    • 제18권6호
    • /
    • pp.58-69
    • /
    • 2004
  • In order to investigate the characteristics of the lateral earth pressure at rest, under hysteretic $K_o-loading/unloading$ conditions, seven types of multi-cyclic models have been studied, using dry sand. For this study, the new type of $K_o-oedometer$ apparatus was developed, and the horizontal pressure was accurately measured. The multi-cyclic models consist of primarily 3 cases: (i) $K_o-test$ under the same loading / unloading condition, (ii) multi-cyclic loading / unloading $K_o-test$ exceeding the maximum pre-vertical stress, and (iii) multi-cyclic loading / unloading $K_o-test$ within the maximum pre-vertical stress. Results fromthe multi-cyclic model indicated that a single-cyclic model could be extended if the exponents for the unloading condition $(\alpha\;and\;\alpha^*)$ and the reloading coefficients $(m_r,\;and\;m_r^{\ast})$ were primarily dependent upon the type of model, number of cycles, and the relative density.

보강토 옹벽의 철도 구조물 적용에 관한 실험적 연구 (Experimental Study on the application of reinforced retaining walls to the railroad)

  • 김용준;김준영;김경택;염형진
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 춘계학술대회 논문집
    • /
    • pp.1020-1025
    • /
    • 2004
  • This research reviews the characteristics of earth pressure incurred by GRS-RW mainly used in the railroad design in order to resist large lateral load caused by train and additional load induced by facilities such as noise barrier fences, electric poles, etc. The results of test shows the existence of arching effect that horizontal earth pressure increases in the backfill while earth pressure applying to the wall reduced under GRS-RW system. In both cases, unreinforced wall and GRS-RW system, the coefficient of earth pressure (K) is about 0.4 at the rest. However, after lateral displacement occurs, the earth pressure nearly reduce down to zero under GRS-RW system while the earth pressure decreases up to 0.12 in case of unreinforced retaining wall.

  • PDF

정지토압계수의 측정장치 개발에 관한 연구 (A Study on the Development of Measuring Equipment for Coefficient of Earth Pressure at Rest)

  • 송무효
    • 한국해양공학회지
    • /
    • 제13권2호통권32호
    • /
    • pp.159-167
    • /
    • 1999
  • For exisiting $K_0$-oedometer, the lateral wall of the ring is cut thinly to make space and by filling the space with space with water or mercuty to keep the balance to the lateral pressure of a specimen, the pressure of the fluid is checked for the pressure of the specimen. But the devices to keep the balance to the lateral pressure of a specimen are complicated, difficult to manufacture and expensive. As newly developed $K_0$-oedometer is equipped with the load cell which can resist higher pressute than the lateral pressure of the specimen, there is nearly no deformation due to the lateral pressure of the specimen. And the measuting is cheap and easy as there are fewer accessories.

  • PDF

점토의 일차원 압밀과정중 작용하는 수평토압과 간극수압 (Lateral Stress and Pore Pressure During One-dimensional Consolidation of Clay)

  • 김재영
    • 한국지반공학회논문집
    • /
    • 제20권6호
    • /
    • pp.5-10
    • /
    • 2004
  • 일반적으로 일차원 압밀상태에 있는 정지토압계수 $K_0$값은 삼축시험에서 구해지지만, 압밀중의 간극수의 흐름이 방사류이고, 공시체의 변형이 3차원적이므로, 얻어진 값의 신뢰성에는 의문이 있다. 여기서는, 일차원 압밀시험기를 개량하여, 압밀링 중앙높이에 배치한 압밀링 요소를 토압감지부로 하며, 감지부 중앙에서는 간극수압을 측정하였다. 내경 6cm의 압밀링은 부동(浮動)링 형식으로 높이 4cm의 공시체 중앙높이가 항상 같은 위치를 유지하는 구조이다. 직경 6cm의 공시체와 샘플링후 시료변형을 고려한 압밀링 내경보다 직경이 약간 작은 공시체에서 얻은 압밀종료시의 $K_0$값은 공시체직경과 압밀압력에 상관없이 거의 0.5를 나타내었다.

철도하부 비개착공법의 벽면배면토사의 미소변형에 따른 수평토압 및 응력이완영역에 관한 연구 (A study on the lateral Earth Pressure and Stress Relaxation Region According to the Infinitesimal Deformation of the Wall and Backside Earth Built by Non-excavation Method Under Railroad)

  • 박윤식;이준석;조국환
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.2393-2399
    • /
    • 2011
  • In the case where the bottom of railroad is penetrated by non-excavation construction method, the design is performed based on the assumption that there is no displacement and no change of stress However, measurement data showed that reduction of earth pressure and relaxation of stress take place by the displacement. In this study, we investigated the earth pressure on the structure under the railroad constructed by a non-excavation method and the stress relaxation region. The design based on earth pressure is non-economical because it is an over design. Relaxation of stress may lead to road base settlement and rail irregularly due to the reduced railroad supporting stiffness, to ballast crack in the case of concrete roadbed. The result showed that it is reasonable to set the stress on the structures as active earth pressure not as earth pressure at rest. Additionally, the study on the stress relaxation region identified the regions that should be supported in future construction by a non-excavation method.

  • PDF

블록식 보강토 옹벽에서의 시공단계별 보강재 타입에 따른 거동비교 (The Comparative Experiment of Geogrid Reinforcement Types with Construction Stage on Segmental Retaining Walls)

  • 이성혁;이진욱;최찬용
    • 한국지반신소재학회논문집
    • /
    • 제11권4호
    • /
    • pp.1-8
    • /
    • 2012
  • 본 논문에서는 실대형 실험을 통해 블록식 보강토옹벽에서 보강재의 타입에 따른 수평토압, 변위, 보강재의 변형률의 특성을 비교하였다. 본 연구를 통해 보강재의 타입에 따라 토압과 변위관계에서 서로 다른 거동특성을 보이고 있으며, 보강토체 내에 배치된 보강재가 연직토압 감소 및 변체변위 억제 효과 등 보강 성능이 있음을 확인할 수 있었다. 수평토압은 보강재의 특성과 변형에 따라 상단부와 하단부에서 주동토압이나 정지토압보다 크게 발생할 수 있으며, 수평토압과 벽체변위는 서로 상관성이 매우 높은 관계를 가지는 것으로 나타났다. 블록식 보강토 옹벽에서 보강재의 등고변형률선 분포는 중앙부분에서 가장 큰 변형이 발생하는 것을 확인하였다.

Effects of freezing and thawing on retaining wall with changes in groundwater level

  • Kim, Garam;Kim, Incheol;Yun, Tae Sup;Lee, Junhwan
    • Geomechanics and Engineering
    • /
    • 제24권6호
    • /
    • pp.531-543
    • /
    • 2021
  • Freezing and thawing of pore water within backfill can affect the stability of retaining wall as the phase change of pore water causes changes in the mechanical characteristics of backfill material. In this study, the effects of freezing and thawing on the mechanical performance of retaining wall with granular backfill were investigated for various temperature and groundwater level (GWL) conditions. The thermal and mechanical finite element analyses were performed by assigning the coefficient of lateral earth pressure according to phase change of soil for at-rest, active and passive stress states. For the at-rest condition, the mobilized lateral stress and overturning moment changed markedly during freezing and thawing. Active-state displacements for the thawed condition were larger than for the unfrozen condition whereas the effect of freezing and thawing was small for the passive condition. GWL affected significantly the lateral force and overturning moment (Mo) acting on the wall during freezing and thawing, indicating that the reduction of safety margin and wall collapse due to freezing and thawing can occur in sudden, unexpected patterns. The beneficial effect of an insulation layer between the retaining wall and the backfill in reducing the heat conduction from the wall face was also investigated and presented.

Experimental and numerical study on the earth pressure coefficient in a vertical backfilled opening

  • Jian Zheng;Li Li
    • Geomechanics and Engineering
    • /
    • 제36권3호
    • /
    • pp.217-229
    • /
    • 2024
  • Determining lateral earth pressure coefficient (EPC) K is a classic problem in geotechnical engineering. It is a key parameter for estimating the stresses in backfilled openings. For backfilled openings with rigid and immobile walls, some suggested using the Jaky's at-rest earth pressure coefficient K0 while other suggested taking the Rankine's active earth pressure coefficient Ka. A single value was proposed for the entire backfilled opening. To better understand the distributions of stresses and K in a backfilled opening, a series of laboratory tests have been conducted. The horizontal and vertical normal stresses at the center and near the wall of the opening were measured. The values of K at the center and near the wall were then calculated with the measured horizontal and vertical normal stresses. The results show that the values of K are close to Ka at the center and close to K0 near the wall. Furthermore, the experimental results show that the horizontal stress is almost the same at the center and near the wall, indicating a uniform distribution from the center to the wall. It can be estimated by analytical solutions using either Ka or K0. The vertical stress is higher near the center than near the wall. Its analytical estimation can only be done by using Ka at the center and K0 near the wall. Finally, the test results were used to calibrate a numerical model of FLAC2D, which was then used to analyze the influence of column size on the stresses and K in the backfilled opening.

Measurement of K0 and K'0 during loading and unloading of loose sand

  • Shay Nachum;Mark Talesnick;Sam Frydman
    • Geomechanics and Engineering
    • /
    • 제32권1호
    • /
    • pp.97-110
    • /
    • 2023
  • The coefficient of lateral earth pressure at rest in loose sand during virgin loading, K0 , and during unloading, K'0 , have been determined from laterally confined load-unload tests. The tests included measurement of lateral pressure with null pressure gauges, side wall friction with newly designed friction meters and applied pressure and base pressure with load cells. The importance of accounting for side-wall friction when evaluating the distribution of vertical pressure over the height of the soil specimen was demonstrated. Relatively uniform friction was observed during loading, but this was not the case during unloading unless friction reduction measures were employed. While the measured value of K0 was found to be close to, if slightly higher than the value commonly estimated on the basis of friction angle, φ', the ratio of K'0 to K0 was found to reasonably fit an expression of the form K'0/K0 = 1 + C·log(OCR), with C equal to 1 in the present tests.