• 제목/요약/키워드: Lateral Displacement Rates

검색결과 12건 처리시간 0.015초

The seismic performance of steel pipe-aeolian sand recycled concrete columns

  • Yaohong Wang;Kangjie Chen;Zhiqiang Li;Wei Dong;Bin Wu
    • Earthquakes and Structures
    • /
    • 제26권1호
    • /
    • pp.77-86
    • /
    • 2024
  • To investigate the seismic performance of steel pipe-aeolian sand recycled concrete columns, this study designed and produced five specimens. Low-cycle repeated load tests were conducted while maintaining a constant axial compression ratio. The experiment aimed to examine the impact of different aeolian sand replacement rates on the seismic performance of these columns. The test results revealed that the mechanical failure modes of the steel pipe-recycled concrete column and the steel pipe-aeolian sand recycled concrete column were similar. Plastic hinges formed and developed at the column foot, and severe local buckling occurred at the bottom of the steel pipe. Interestingly, the bulging height of the damaged steel pipe was reduced for the specimen mixed with an appropriate amount of wind-deposited sand under the same lateral displacement. The hysteresis curves of all five specimens tested were relatively full, with no significant pinching phenomenon observed. Moreover, compared to steel tube-recycled concrete columns, the steel tube-aeolian sand recycled concrete columns exhibited improved seismic energy dissipation capacity and ductility. However, it was noted that as the aeolian sand replacement rate increased, the bearing capacity of the specimen increased first and then decreased. The seismic performance of the specimen was relatively optimal when the aeolian sand replacement rate was 30%. Upon analysis and comparison, the damage analysis model based on stiffness and energy consumption showed good agreement with the test results and proved suitable for evaluating the damage degree of steel pipe-wind-sand recycled concrete structures.

삼축압축 하에서 지중연속벽 주변 방콕 연약 점토의 거동 (Behaviors of Soft Bangkok Clay behind Diaphragm Wall Under Unloading Compression Triaxial Test)

  • Le, Nghia Trong;Teparaksa, Wanchai;Mitachi, Toshiyuki;Kawaguchi, Takayuki
    • 한국지반공학회논문집
    • /
    • 제23권9호
    • /
    • pp.5-16
    • /
    • 2007
  • 비배수 상태에서의 변수 $S_u,\;E_u$, n의 함수로 표현되는 단순한 선형 완전점탄성 모델은 굴착 중에 연성 토양에 시공되는 지중연속벽의 변위를 예측하는데 사용된다. 그러나 유한요소해석에서의 이러한 모델은 굴착이 잠시 중단되었거나 완료된 후 지중연속벽의 측방향 변위를 연속적으로 예측하는 데 한계가 있다. 굴착이 이루어지지 않는 동안의 지중연속벽 주변 토양의 변형 거동특성을 연구하기 위하여, 지중연속벽 주변 토양에 작용하는 응력상태를 가정한 '방콕 연약 점토'에 대한 일련의 삼축압축시험이 모사되었다. 본 연구에서는 세 가지 다른 조건에서의 삼축압축시험이 실시되었는바, 압밀 비배수 조건에서의 재하($CK_0UC$), 압밀 배수 및 비배수 조건에서의 재하 및 제하($CK_0DUC$$CK_0UUC$)의 조건에서 시험이 실시되었다. 시험으로부터 일련의 $CK_0DUC$ 시험에서 얻은 전단강도는 $CK_0UC$ 시험에서의 잔류강도와 같음을 알 수 있었다. $CK_0DUC$ 시험에서 시험편에 가해지는 수평압력을 점진적으로 감소시키면서 측정한 탄성계수는 편차응력의 증가와 더불어 감소함을 알 수 있었다. 또한 $CK_0UC$$CK_0DUC$시험에서 한계상태 관계의 기울기가 동일하게 나타났다. 더욱이, $CK_0DUC$시험에서 수평압력을 점진적으로 감소시킬 경우의, 축방향 및 반경방향 변형율 증가율을 시간, 한계상태 관계의 기울기, 편차응력과 평균 유호응력의 비의 함수로 표현할 수 있었다. 이 연구는 삼축압축시험의 제하 과정에서 얻은 시험 결과가 굴착 중 지중연속벽의 변형을 예측하는데 사용될 수 있음을 보였다.AFM)과 Scanning Electron Microscopy(SEM)을 통해 관찰한 GST 다층박막시료의 고온 열처리 전후 표면미시거칠기 변화도 PRAM 기록기를 사용할 때에는 in-situ 타원계를 사용할 때보다 1/10 정도의 크기를 보여주어 PRAM 기록기와 분광타원계를 사용하여 결정한 GST의 고온광학물성의 신뢰성을 확인하여 주었다.>, 여자 $179.1{\pm}37.2%$이었다. 평균필요량에 비해 가장 낮은 양을 섭취한 영양소는 엽산으로서 남자 $60.1{\pm}10.8%$, 여자 $54.6{\pm}9.9%$로 조사되었다. 칼슘의 섭취량은 평균필요량에 비해 전체 $74.9{\pm}31.9%$로 나타났다. 에너지 섭취량에 있어서 남자 노인들은 모두가 필요추정량의 75% 미만을 섭취하고 있었고 여자 노인의 경우에도 97%가 필요추정량의 75% 미만을 섭취하여 에너지 섭취량이 매우 낮았다 반면에 단백질 섭취량에 있어서는 남자 노인의 경우 100%가 평균필요량의 125%를 초과하였고, 여자 노인의 경우에는 91%가 평균필요량의 125%를 초과하여 대조적이었다. 비타민 A와 E는 각각 평균필요량과 충분섭취량의 125%를 초과하는 비율이 높게 나타난 반면에 비타민 $B_2$는 특히 남자 노인에서 평균필요량의 75%미만을 섭취한 비율이 높게 나타났다. 엽산 섭취량에 있어서는 평균필요량의 75% 미만을 섭취한 비율이 전체 96%로 나타나 심각한 부족상태로 조사되었다 반면에 철의 섭취량은 남녀 모두 100%가 평균필요량의 125%를 초과하여 섭취한 것으로 나타났다. 아연의 섭취량은 남자 17%,여자 15%가 평균필요량의 75% 미만을 섭취한 것으로 조사되었다. 에너지와 엽산은 모든 노인들에서 평균필요량에 미달되게 섭취한