• Analytical Science and Technology
• /
• v.35 no.3
• /
• pp.129-135
• /
• 2022

We tested the pre-treatment of alumina, leucine, alumina mixed with leucine at ratios of 9:1 (Al-Leu (9:1)) and 5:1 (Al-Leu (5:1)), and alumina mixed with sodium lactate at a ratio of 5:1 (Al-Lac (5:1)) on aged fingerprints (1, 7, 14, and 30 days after natural fingerprinting) before cyanoacrylate (CA) fuming to improve the development efficacy. As a result of the experiment, fingerprints with pre-treatment of alumina, leucine, Al-Leu (9:1), Al-Leu (5:1), and Al-Lac (5:1) showed better development efficacy (area and minutiae) than fingerprints without pre-treatment. Therefore, this modified CA fuming method improved the development efficacy with five pretreatments.

• Analytical Science and Technology
• /
• v.35 no.1
• /
• pp.1-7
• /
• 2022

This study suggests a new one-step fluorescent cyanoacylate-fuming method for developing fingerprints by using a CAB mixed with dimethylaminobenzalde (DMAB) and cyanoacylate (CA) in a specific ratio. CAB is prepared by mixing 2.5 % (w/w) DMAB with CA and fumigated at 180 ℃. Under these conditions, developing fingerprints showed the best results. The fuming method using CAB develops latent fingerprints into fluorescence and has a higher sensitivity than CA, and it showed comparable or better contrast to existing fluorescence enhancement methods. It was also applicable on a variety of non-porous surfaces that can be encountered at ordinary times. This method is more useful than conventional fluorescent dyeing methods in that it minimizes damage to fingerprints or samples, makes it easy to manufacture, saves time, and can use existing current equipment as it is.

• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.333-341
• /
• 2020

Since thermal paper is widely used in daily life such as convenience store receipts, lottery tickets and ATM receipts, it is important to develop fingerprints on thermal papers because it can be easily found in crime scenes. This study compared the ability of fingerprint development between vacuum metal deposition(VMD) and 1,2-indanedione(SOON-100) in order to evaluate the effectiveness of VMD, which some literatures have stated to be effective in thermal papers. As a result, in the case of SOON-100, clear ridges of fingerprints that enable individual identification were observed after an hour of deposition, although the fresh fingerprints were faint. In the case of VMD, the fingerprints gradually spread and the quality of the ridges deteriorated rapidly after 6 hours of deposition. This results is consistent with the principle of VMD. Considering the principles of VMD and the characteristics of the surface of thermal paper, VMD is not suitable for the development of potential fingerprints on the thermal paper.

• Analytical Science and Technology
• /
• v.33 no.4
• /
• pp.197-207
• /
• 2020

The current comparison methods with scoring systems that are used to compare visualized latent fingerprints (LF) have disadvantages. Evaluators using these methods are prone to make errors and fail to discriminate LFs correctly to notice the differences among those LFs. Therefore, a comparative and quantitative evaluation method that is capable of obtaining more objective and quantitative results is needed. Densitometric image analysis (DIA) is used in other fields as a reliable semi-quantitative comparison method. To apply DIA to LFs, the potential variables that can occur during the DIA process were tested. The visualized ridges of LFs can be compared using the concentration of dots against the background to make it possible to analyze the ridges with DIA. The variables that can be present during the DIA process include the thickness of the analysis line, the number of ridges to be taken, the number of divided zones within each of the fingerprints, and the angles of the analysis line against the ridge lines that were selected. From the analysis of the inked fingerprints and circular lines that are similar to fingerprints, the angle of the analysis lines with the ridge line was the most significant variable. The preliminary test result was applied to the comparison of LFs that were developed with the powder method and then compared with the AFIS analysis. A similar trend was found, and a more detailed and semi-quantitative comparison of the visualized LFs was possible. In the future, it is necessary to check the evaluative ability of the DIA method by analyzing the visualized LFs with other various development methods. However, DIA is currently an option that can be used as an objective comparative evaluation method during fingerprint studies with supplementary role.

• Analytical Science and Technology
• /
• v.34 no.3
• /
• pp.122-127
• /
• 2021

A mixture of polyvinylpyrrolidone and 1,2-indanedione (PVP-IND) is known to be the best reagent for developing latent fingerprints deposited on the surface of a thermal paper. However, no study has evaluated whether PVP-IND could enhance fingerprints in blood deposited on the surface of thermal paper. Therefore, in this study, the ability of PVP-IND to enhance the fingerprints in blood was investigated. Furthermore, aqueous amido black solution, which is known to be the best reagent for enhancing fingerprints in blood deposited on the surface of thermal paper, was used for comparison with PVP-IND. Therefore, while enhancing the fingerprints in diluted blood, PVP-IND enhanced the quality of fingerprints compared to aqueous amido black solution. The ridge diffused when the undiluted fingerprints in blood were enhanced with PVP-IND because PVP reacted with amino acids in blood; however, amido black solution yielded better results. When treated with PVP-IND, it is presumed that the ridge diffused due to the reaction of PVP and amino acids contained in the blood.

• The Journal of the Korea Contents Association
• /
• v.16 no.9
• /
• pp.247-253
• /
• 2016

Some previous studies had proven that ninhydrin or its analogues are not effective in developing fingermarks on some types of paper. This study has evaluated the efficiency of four reagents for detecting latent fingermarks on six unusual paper surfaces. Among the six types of paper surfaces, none of the reagents worked on the newspaper. The 1,2-IND/Zn developed fingermarks on most of the surfaces tested.

• Analytical Science and Technology
• /
• v.34 no.2
• /
• pp.56-67
• /
• 2021

Due to the difficulty of grading visualized fingerprints with previously known evaluation methods for the comparison of split fingerprints, a preliminary study was performed with the densitometric image analysis (DIA) method as a potential quantitative and supplementary evaluation method. Each image of inked split fingerprints was divided into 4 zones for analysis. Weekly intra- and inter- analysis by two analysts with three whole fingerprints that were constructed by combining inked split fingerprints showed that the average area values and the ranges of difference fluctuation were not significantly different between strong fingerprints and strong-weak pairs, while they were different in weak fingerprints and weak-weak pairs. In the case of weak fingerprints, the exact acquisition of ridges was difficult and this seemed to influence the results. An additional study is needed for the improved reliability using DIA method with weak fingerprints such as 8 zones division rather than 4 zones. In addition, the analysis results performed by several analysts at different times should be used to improve the reliability of the analysis method further. Based on the above result, it can be judged that utilizing the DIA method as a secondary evaluation method of the existing scoring system would be effective with the additional studies especially on weak fingerprints.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.331-336
• /
• 2021

Vacuum metal deposition(VMD) using gold and zinc is known as a very sensitive technique of developing latent fingerprints on nonporous surfaces by excellent malleability and ductility of gold. However, VMD produces empty print which cannot be identified. There is only presumption about the cause of occurrence of empty print, the exact cause is not known. In this study, we experiment on the freshness of fingerprints and sensitivity of techniques that are estimated as the factors causing empty print, based on this, we suggest cyanoacrylate fuming is effective to redevelop empty print.

• Analytical Science and Technology
• /
• v.27 no.3
• /
• pp.147-152
• /
• 2014

RUVIS(Reflective Ultraviolet Imaging System) is an effective equipment that detects the location of latent fingerprint at crime scene using short wavelength ultraviolet of 254 nm. In this study, the degree of DNA damage in biological samples was compared depending on the distance and time of processing using four commonly used RUVIS. 50% of DNA was damaged by treating 10 seconds at 10 cm distance in 3 types of RUVIS such as Police RUVIS, SIRCHIE mini light and SIRCHIE RUVIS. In addition, the degree of DNA damage was increased as the distance was closer and the treatment time was longer. It showed that short wavelength UV could cause DNA damage when used close to the samples at crime scene. Therefore, it was suggested to use RUVIS at a distance of at least 1 m. The degree of DNA damage was not significant by Polilight which used long wavelength ultraviolet of 350 nm. As a result, the choice and usage of which UV light and RUVIS were critical for detection of fingerprint and successful DNA typing.

• Analytical Science and Technology
• /
• v.30 no.6
• /
• pp.303-311
• /
• 2017

A new method for obtaining the photoluminescence of footwear impression by using 1,2-indandione (1,2-IND) solution, which is a latent fingerprint-developing reagent, was studied. A binary complex of DL-alanine and 1,2-IND was prepared by spraying a DL-alanine solution and the 1,2-IND solution (an amino acid sensitive reagent) onto dry or wet origin footwear impression deposited on the surface of printed A4 paper. This binary complex reacts with the trace metal component in the footwear impression to form a ternary complex that exhibits photoluminescence. However, when 5-methylthioninhydrin (5-MTN) solution was used instead of 1,2-IND, no consistent photoluminescence was observed even under identical treatment conditions. In addition, when footwear impressions treated with DL-alanine and 1,2-IND solutions were stored under various temperature conditions (30, 40 and $50^{\circ}C$) and various humidity conditions (30 %, 40 %, 50 % and 60 % RH), the contrast between the footwear impression and the background decreased. Optimal footwear impression photoluminescence was obtained when the footwear impressions treated with DL-alanine and 1,2-IND solutions were stored at $30^{\circ}C$ and 30 % RH for 1 h. The sensitivity of the developed method was ccompared with the sensitivities of three known methods - black gelatin lifting, 2,2'-dipyridyl treatment, and 8-hydroxyquinoline treatment. The results showed that the sensitivity of the developed method was worse than that of the black gelatin lifting method but better than that of 2,2'-dipyridyl or 8-hydroxyquinoline treatment method.