• 대한토목학회논문집
• /
• 제29권4B호
• /
• pp.357-363
• /
• 2009

일반적으로 사용되는 관수로의 평균유속을 구하려면 Darcy-Weisbach의 마찰손실수두공식을 사용하면 되나, 그러나 이 식의 마찰손실계수 f는 Reynolds수와 상대조도(${\varepsilon}$/d)의 함수이므로 사용하기에 매우 불편하며 따라서 보다 편리한 식이 요구된다. 이에 본 연구에서 Chiu 유속공식의 신뢰성과 정확성을 증명하기 위하여 관수로에서 비삽입식 유속측정 장치인 레이저 유속계(Laser Doppler Velocimeter: LDV) 및 초음파 유량계(Ultrasonic Flowmeter: U/F), 삽입식 유속측정장치인 피토관 (Pitot Tube)을 이용하여 실측한 유속측정 자료와 Chiu의 공식을 이용한 유속분포가 매우 잘 일치함을 증명하였다. 유량의 증감에 관계없이 실험실 수로에서의 최대유속과 평균유속간의 이론적인 선형관계를 증명함으로써 관수로내 유속의 평형상태, 즉 엔트로피 파라미터 M값에 대응하는 평형상태에 도달하려 하고 이 평형상태를 지속적으로 유지하려고 하는 경향이 있음을 증명하였다. 또한, 한 단면을 대표하는 엔트로피 파라미터 M값이 결정되면 최대유속이 발생하는 지점에서의 유속 측정만으로 단면 전체의 평균유속을 쉽게 구할 수 있고 이로부터 간단히 유량을 산정할 수 있음을 증명하였으며, 이는 추후 관수로 설계 및 운영관리 시 가장 중요한 평균유량을 측정할 수 있는 이론적인 도구로 사용될 수 있음을 의미하는 것이다.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1378-1386
• /
• 2002

In the present study, velocity profile and wall shear stress distributions of developing turbulent oscillatory flows in an oscillator connected to straight duct located in exit region of a curved duct was investigated experimentally. The experimental study for air flows was conducted to measure axial velocity profiles, shear stress distributions by using the Laser Doppler Velocimetry(LDV) system with the data acquisition and processing system of Rotating Machinery Resolver(R.M.R) and PHASE software. The results obtained from experimental studies are summarized as follows. The critical Reynolds number for a change from transitional oscillatory flow to turbulent flow was about 7500, in the 60region of dimensionless axial position which was considered as a fully developed flow region. The turbulent oscillatory flow, velocity profiles of the inflow period in the entrance region were gradually developed, but those of the outflow period were not changed nearly. Velocity profiles of inflow and outflow were shown as a symmetric form in a fully developed flow region. The wall shear stress distributions of turbulent oscillatory flow increase rapidly as the flow proceeds to downstream and flow was in good agreement with the theoretically.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.675-684
• /
• 2002

Two-dimensional, angle-resolved LDV(Laser Doppler Velocimetry) measurements of the turbulent rotating flow field in a confined cylinder have been performed. The configurations of interest are flows between a rotating upper disk with a rod attached by a disk or impeller($\theta$ = 45$^{\circ}$, 90$^{\circ}$) and a stationary lower disk in a confined cylinder. The mean flow velocity as well as the turbulent intensity of the flow field have been measured. The results show that the flow is strongly dependent on the position of the impellers or the disk, negligibly affected by the Reynolds number in turbulent flow. It is observed that the mixing effect of the axial flow impeller($\theta$ = 45$^{\circ}$) is better than that of the radial flow impeller($\theta$ = 90$^{\circ}$) or a disk.

• 대한조선학회지
• /
• 제26권3호
• /
• pp.1-8
• /
• 1989

유동의 가시화 혹은 물체주위의 유동장 측정을 위하여 적당한 크기의 소형 회로수조를 실험실에서 제작, 레이저 유속계를 사용하여 그 유동장 특성을 조사하였다. 수직형 회로수조는 유동이 굽어진 부분을 지나면서 실험측정 부분에서 평균속도분포가 균일하지 못하며, 균일한 유동장을 얻기 위해 수축부 다음에 표면 유동 가속기를 설치하였다. 적당한 표면유동가속으로 안정되고 균일한 속도분포를 얻을 수 있으며, 이 표면유동가속기의 최적점을 찾는 함수로는 단순 평균속도 뿐만 아니라 난류강도도 중요한 요소임이 실험적으로 밝혀졌다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.179-184
• /
• 2001

A shrouded rotating disk airflow has a simple figure on geometric basis, but has various and complicated forms of flow. This flow type can be applied to many turbo devices such as information storage device(optical disk). Circumferential velocity frequency in the middle plane between disk and shroud wall is measured using laser Doppler velocimeter. Solid body region of flow was founded when low Reynolds number relatively. Through the informations of the experimental results. we could examine the number and distribution of the vortices. When Reynolds number $3.80{\times}10^5$ there is a dominant frequency of which vortices number is 5.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1966-1970
• /
• 1991

The self-mixing type semiconductor laser Doppler velocimeter(SM-LDV) is applied to measure two simultaneously moving targets with different velocities in the same direction as a prototype target for multiscatterers. The measured beat waveform is found to be a composite wave of each beat waveform measured fran each of only moving target. In the composite waveform, each one-cycle wave has a feature of the sawtooth wave. This fact shows a possibility to discriminate the flow direction of fluid containing multiscatterers with distributed velocities by cooperating an improved version of the direction discrimination circuit already devised by the authors.

• 한국전산유체공학회지
• /
• 제6권4호
• /
• pp.8-14
• /
• 2001

The phenomena of two-phase suspension flows appear widely in nature and industrial processes. Hence, it is of great importance to understand the mechanism of the gas-solid two-phase flows. In the present study, the numerical simulation has been approached by utilizing the Eulerian-Lagrangian methodology for describing the characteristics of the fluid and particulate phases in a vertical pipe and a 90°square-sectioned bend. The continuous phase(gas phase) is described by the Eulerian formulation and a κ-ε turbulence model is employed to find mean and turbulent properties of the gas phase. The particle properties(velocity and trajectory) are then described by a Lagrangian approach and computed using the mean velocity and turbulent fluctuating velocity of the gas phase. The predictions are compared with measurements by laser-Doppler velocimeter for the validation. As a result, the calculated results show good agreements.

• 오토저널
• /
• 제14권3호
• /
• pp.80-89
• /
• 1992

An experimental study of in-cylinder of flow and combustion characteristics in two gasoline engines of different intake ports which are denoted as original port and masked shroud head (MSH) ports is presented. The flows generated by the MSH and the original port are invest- igated by laser Doppler velocimeter(LDV) under steady flow and motoring (non-firing) condit -ions. Combustion characteristics with different swirl levels produced by two intake ports are analyzed by combustion pressure measurement and statistical calculation. The swirl inside the cylinder of the MSH port engine is found to be much higher than the original port, and the MSH has a large eddy motion of cylinder diameter size. Using ensemble average method to valuate engine turbulence under motoring condition, the MSH port engine is shown to have h -igher turbulence intensity than the original port, so that the effect of the MSH port on fast burn is shown. Also the cyclic variations of peak pressure and the reaching time in the MSH port are apparently reduced.

• 기계저널
• /
• 제34권4호
• /
• pp.253-261
• /
• 1994

이글은 LDV의 단일실현형 데이터로부터 얻어지는 여러 통계치의 정확한 추정을 위해 기존에 발표된 논문들을 정리함으로써 난류유동장에 대한 실험에서 정밀한 실험값을 얻고자 하는데 목 적을 두었다. LDV로부터 얻어지는 데이터열로부터 추정되는 통계값은 머리말에서 언급되었듯이 다른 여러 가지 편의들에 의해서도 영향을 받는다. 또한 속도 편의의 존재여부에 대해 실험을 근거로 한 논란은 계속되어 왔는데 이는 가우시안 형태의 레이저 빔이 갖는 강도분포에 의해 나타난다고 알려져 있다. 즉, 측정체적을 지나는 산란입자에 대한 광감지기에서 검출되는 산란 광전자는 속도편의와 상반되는 효과를 나타내며 이를 진폭편의(amplitude biss)라 한다. 이 속 도편의와 진폭편의의 상대적인 양은 실험자가 입자 도착 시간간격에 대한 확률분포함수 등을 사용해서 결정해야 한다. 결론적으로 산란입자에 의한 여러 가지 통계 추정량의 편의오차를 줄 이기 위해서는 제편의문제에 대한 이해와 실험치를 바탕으로 한 실험연구인들의 적절한 판단이 필수적이다.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.763-770
• /
• 1995

Gas flow characteristics within the cylinder is important factors in impoving lean combustion stability. This paper shows the effects of various flow fields generated by a swirl control valve(SCV) on combustion process in a 4-valve spark ignition engine. An impulse swirl/tumble meter was used to elucidation the steady-state flow characteristics, and a rotating grating type LDV was developed to measure the mean velocity and tunbulence intensity in relation to the crank angle. These methodologies were applied to clarify the correlation between gas flow characteristics and combustion stability at a lean air fuel ratio. An analysis of the correlation revealed the gas flow conditions required to optimize a lean-burn system.