• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.290-295
• /
• 2004

Mircolens and microlens V-groove are realized using a novel fabrication technology based on the exposure of a resist, usually PMMA, to deep X-rays and subsequent thermal treatment and inclined deep X-ray lithography, respectively. The fabrication technology is very simple and produces microlenses and microlens V-groove with good surface roughness of several nm. The molecular weight and glass transition temperature of PMMA is reduced when it is irradiated with deep X-rays. The microlenses were produced through the effects of volume change, surface tension, and reflow during thermal treatment of irradiated PMMA. Microlenses were produced with diameters ranging from 30 to $1500\mu\textrm{m}$. The surface X-ray mask is also fabricated to realize microlens arrays on PMMA sheet with a large area. The size of the micro V-groove is fabricated in the range of 12~$60\mu\textrm{m}$.

• Journal of the Korean Ceramic Society
• /
• v.30 no.6
• /
• pp.485-491
• /
• 1993

Porous glass in the ZrO2.SiO2 system containning up to 30mol% zirconia were prepared by the sol-gel method from metal alkoxides and their pore characteristics with reaction parameters were investigated. The gels were made by hydrolyzing and condensation of the mixed metla alkoxides and were converted into the porous glass by heating up to $700^{\circ}C$. As a results, the mean pore radius became larger with increasing contents of HCl, H2O and hydrolysis temperature, and an alcohol with a large molecular weight for making the porous glass. In the case of 20ZrO2.80SiO2 porous glass with heated at $700^{\circ}C$, HCl and H2O content was 0.3mol and 4mol, the specific surface area was 284$m^2$/g, average mean pore radius was about 19.4$\AA$, porosity was 22.55% and pore characteristics depended on heating temperature.

• KSBB Journal
• /
• v.15 no.1
• /
• pp.22-26
• /
• 2000

Kraft Lignin which is produced abundantly in pulp industry, was chemically degraded into small oligomers and polymerized using horseradish peroxidase. Lignin acidolysis was optimized by controlling reaction time and HCI concentration. Acidolyzed lignin was polymerized and copolymers of acidolyzed lignin and phenol or p-cresol were synthesized. 70% of kraft lignin was degraded after acidolysis. Number average molecular weight of all lignin polymers were from 8,500 to 14,000 and did not show large difference. Differential scanning calorimeter analysis showed that acidolyzed lignin did not show any melting temparature under $300^{\circ}C$, which indicates that newly synthesized lignin polymers can be used in industry under mild condition.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1025-1029
• /
• 2003

We studied the cross-sectional profiles of deformed thermoplastics in hot embossing process and compared with melt flow index for various embossing conditions such as embossing temperature, embossing pressure and initial thickness of the thermoplastics. The fastest embossing times for complete penetration of the cavities were obtained at temperature greater than $60^{\circ}C$ above glass transition temperature (Tg). When the melt flow index of polymer is low, the penetration ratio does not become large even if the embossing pressure increases. The complete occupation of the cavities was easier obtained with high melt flow index polymer than low melt flow index polymer at the same process condition. We believe these results can be very useful for optimizing nanostructured hot embossing also known nanoimprinting process conditions.

• Preventive Nutrition and Food Science
• /
• v.21 no.4
• /
• pp.398-405
• /
• 2016

The objective of this study was to evaluate the characteristics of melanoidins formed from black garlic (BG) after different thermal processing steps. The melanoidins formed from BG during thermal processing were produced in large amounts, and the initial (280 nm), intermediate (360 nm), and final stage product (420 nm) had similar tendencies. Compounds like degraded proteins, peptides, and phenolic acids were present in the melanoidins during thermal processing. All the melanoidin samples showed different absorptions in the UV-visible spectra, although these had similar shapes. Moreover, the carbon, hydrogen, and oxygen content of melanoidins formed from BG during thermal processing decreased initially, and then increased. However, the nitrogen content increased during thermal processing. As thermal processing progressed, the molecular weight of all the melanoidin samples showed increasing intensities, whereas the major peaks of each melanoidin sample had different retention times. Furthermore, the melanoidins formed from BG after different thermal processing steps contained -OH, -CH, amide I, and III groups. The crystallinity of the melanoidins was majorly formed at $31.58^{\circ}$ and $43.62^{\circ}$ ($2{\theta}$).

• Journal of Microbiology and Biotechnology
• /
• v.12 no.5
• /
• pp.760-765
• /
• 2002

Mucor miehei KCTC 6011, which grew successfully in ginseng-steaming effluents and produced a large amount of chitosan efficiently, was selected from various fungi. Approximately 120 mg of chitosan per g-dry mycelium was maximally produced in 84 h at $25^{\circ}C$ when grown in the ginseng-steaming effluent (pH 8.0) supplemented with 0.5% yeast extract and 0.002% CuSO$_4$. Chitosan produced by Mucor miehei KCTC 6011 was identified by the IR-spectra to have deacety lated approximately 56%. Viscosity and molecular weight of the chitosan were 80 cps and $1.07\times10^3$ kDa, respectively. The chitosan at 1.5 mg/ml inhibited 73.9% of the mycelium growth of Rhizoctonia solani in 60 h.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.75-81
• /
• 1997

o-Aminobenzene sulfone-N-ethylanilide, the diazo component of C.I. Acid Red 57, is currently being diazotised by the use of nitrosylsulphuric acid because of its high molecular weight and weak basicity. However, this method has many problems such as complicated manufacturing process and discharge of large volume of strong acidic effluent. In this study, the possibility of replacing nitrosylsulphuric acid method by direct method, which is simpler and produces less effluent, has been checked and the optimum process condition was studied. The effect of HCl concentration, the amount of sodium nitrite and particle size of diazo component on diazotisation yield was investigated. The optimum pH condition for coupling reaction was also evaluated.

• Journal of Ginseng Research
• /
• v.14 no.1
• /
• pp.14-20
• /
• 1990

In An invertase (EC 3.2.1.26) was extracted from Korean giseng (Panax ginseng C.A. Meyer) with distilled tvater The ginseng invertase was purified about 62.6 folds purified by procedures including ammonium sulfate fractionation , DEAE-cellulofine chromatography and gelfiltrations through Sephadex G-75 and the recovery of enzyme activity was 11.1%. The homogeneity of the purified enzyme was probed by polyacrylamide gel disc electrophoresis. The purifled enzyme was divided into two different subunits by treating with a mixture of SDS and 2-mercautoethanol, and the molecular weight of the large subunit was estimatedtobe 116,000 and that of the small one to be 14,000. The optimal VH and temperature of the enzyme were pH 6 and 45$^{\circ}C$, respectively. The enzyme hydrolyzed specifically the hydrolyzation of the -fructofuranosides such as sucrose, raffinose and inulin. The Km values of the enzyme for sucrose and raffinose were determined to be 0.85 and 0.6 mM, respectively.

• Elastomers and Composites
• /
• v.50 no.4
• /
• pp.286-291
• /
• 2015

Polyvinylacetate (PVAc) was prepared using thermal initiation and redox initiation via emulsion polymerization at $80^{\circ}C$. The polymerization conditions had a significant effect on the properties of the synthesized PVAc. When hydrogen peroxide and tartaric acid as the initiator for redox polymerization were used, the synthesized PVAc had a low molecular weight. In comparison with thermal polymerization, smaller PVAc particles were formed during the redox polymerization due to relatively faster polymerization rate, which in turn resulted in improved adhesion property. It is considered that the rapid generation of smaller particles induces the formation of a large surface area.

• Radiation Oncology Journal
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2016

Overexpression of human epidermal growth factor receptor 2 (HER2) is found in about 20% of breast cancer patients. With treatment using trastuzumab, an anti-HER2 monoclonal antibody, systemic control is improved. Nonetheless, the incidence of brain metastasis does not be improved, rather seems to be increased in HER2-positive breast cancer. The mainstay treatment for brain metastases is radiotherapy. According to the number of metastatic lesions and performance status of patients, radiosurgery or whole brain radiotherapy can be performed. The concurrent use of a radiosensitizer further improves intracranial control. Due to its large molecular weight, trastuzumab has a limited ability to cross the blood-brain barrier. However, small tyrosine kinase inhibitors such as lapatinib, has been noted to be a promising agent that can be used as a radiosensitizer to affect HER2-positive breast cancer. This review will outline general management of brain metastases and will focus on preclinical findings regarding the radiosensitizing effect of small molecule HER2 targeting agents.