• 한국추진공학회지
• /
• 제8권3호
• /
• pp.10-16
• /
• 2004

원통 다발형 그레인의 연소시험 결과 저주파 불안정 현상이 나타났다. 그 원인은 원통 그레인 내면의 압력과 외면의 압력차(압력 비평형)가 주원인임을 알 수 있었으며, 그레인 반경방향으로 홀을 뚫어 그레인 내면에 상승된 압력을 외면으로 빠르게 확산되도록 하여 안정된 연소현상을 얻을 수 있었다. 그러나 고온 조건에서도 안정된 연소 현상을 얻기 위하여 직경 3mm 흘 7개를 뚫게 됨에 따라 가스발생량의 증가가 많이 둔화되어 격자를 사용하는 방법을 연구하게 되었다. 격자를 사용함으로써 큰 와류(large vorticity)를 소멸시켜 그레인에 홀을 뚫지 않고도 안정된 연소를 얻을 수 있었으며 가스 발생량도 점진적으로 증가시킬 수 있었다. 가로${\times}$세로 격자는 5${\times}$5, 그레인은 격자에 고정시키지 않을 때 가장 좋은 결과를 얻을 수 있었다.

• 한국지반공학회논문집
• /
• 제29권7호
• /
• pp.47-55
• /
• 2013

조립재료의 요소시험에서 장비에 허용되는 조립재료의 입자크기가 실제 현장에서 사용되는 입자크기에 비해 작은 경우가 종종 발생하기 때문에, 이러한 경우에는 시험에 사용되는 재료의 최대입경을 시험장치의 가용 크기까지 축소시켜 시험을 수행하게 된다. 본 연구에서는 이처럼 최대입경 크기를 축소시켜 입도를 조정했을 때, 저변형률에서의 탄성계수에 미치는 영향을 평가하기 위해 대형반복삼축압축시험을 수행하였다. 본 연구 대상재료의 시험 결과, 입도 조정된 시편들은 원입도 시편의 탄성계수를 과소평가하는 경향이 있었으며, 그 차이는 저변형률에서 더 크게 발생되었다.

• 한국재료학회지
• /
• 제31권3호
• /
• pp.139-149
• /
• 2021

In this study, three kinds of bainitic steels are fabricated by controlling the contents of vanadium and boron. High vanadium steel has a lot of carbides and nitrides, and so, during the cooling process, acicular ferrite is well formed. Carbides and nitrides develop fine grains by inhibiting grain growth. As a result, the low temperature Charpy absorbed energy of high vanadium steel is higher than that of low vanadium steel. In boron added steel, boron segregates at the prior austenite grain boundary, so that acicular ferrite formation occurs well during the cooling process. However, the granular bainite packet size of the boron added steel is larger than that of high vanadium steel because boron cannot effectively suppress grain growth. Therefore, the low temperature Charpy absorbed energy of the boron added steel is lower than that of the low vanadium steel. HAZ (heat affected zone) microstructure formation affects not only vanadium and boron but also the prior austenite grain size. In the HAZ specimen having large prior austenite grain size, acicular ferrite is formed inside the austenite, and granular bainite, bainitic ferrite, and martensite are also formed in a complex, resulting in a mixed acicular ferrite region with a high volume fraction. On the other hand, in the HAZ specimen having small prior austenite grain size, the volume fraction of the mixed acicular ferrite region is low because granular bainite and bainitic ferrite are coarse due to the large number of prior austenite grain boundaries.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2008년도 High Temperature Superconductivity Vol.XVIII
• /
• pp.87-87
• /
• 2008

• Journal of Biosystems Engineering
• /
• 제3권1호
• /
• pp.33-46
• /
• 1978

To get the goal of self-supply of food grain, improvement of post-harvest grain operations in rural area is under consideration as an important task of agriculture in Korea. This is study is focused on elimination of losses and deteriorations of grain and reduction of labour requirements and funds for post-harvest grain operations. The purpose of this study are presentation of basic data referring to conventional post-harvest grain operations in rural area and suggestion of improving methods for the operations, and also finding out reasonable operating processes of the operations. The result of this study are follows; 1. Grain drying in-the-filed which is performed before threshing has major factors of grain loss during drying, and so should be restrained as possible. Combine harvesting system is recommended among other king of mechanized harvesting systems for restraining in-the-field drying and securing available labors for drying. 2. It is predicted that mechanical grain drying could be prevalent when combine harvesting is taken place. Recommended grain drier for pre-combine harvesting system and for combine harvesting system is batch-type drier and circulating -type drier, respectively. 3. As existing farm storages for grain have insufficient spaces and offer poor conditions for grain storing , it is greatly needed to build up new storage which store only grains. And it is concluded that storing grain in community common storages in desirable. 4. Power supplying system for milling machinery in local milling plants, that a large capacity prime mover supplies power to 4 to 6 kinds of milling machinery simultaeously, should be converted to a system of several small capacity prime movers supplying power to each machiner y for the purpose of reducing extra consumption of energy. 5. Governmental grain, of which Korean farms produced, should be milled and stored in the local milling plant successively for the purpose of reducing transportation fee and stroing facilities. 6. Furture post-havest grain operations-drying, storing and milling should be periormed successively in he community common plant. And average optimum processing capacity of the plant is estimated about 300 metric ton of grain every year.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.146-146
• /
• 2010

Electrical properties of Large-grain-size TIT with 7/7 ${\mu}m$ channel width and length which gate insulator is made of 20nm $SiO_2$ and 80nm $SiN_x$. was fabricated and measured with Large-grain-size technic(MICC) and compared to ELA technic's data. The field-effect mobility was decreased from 106.78 to $88.74\;cm^2$/Vs and threshold voltage also decreased from -1.8382 to -0.9529 V, when TFT process is changed from ELA technic to MICC technic. Subthreshold swing, also, increased from 0.22 to 0.32 V/dec and $I_{on/off}$ ratio decreased from $1.12{\times}10^8$ to $5.75{\times}10^7$.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.19-23
• /
• 2019

A large grain YBCO bulk superconductor is fabricated by the top-seeded melt growth (TSMG) method. In the TSMG process, the seed crystal is placed on the top surface of a partially melted compact and therefore the seed crystal is frequently tilted during the melt process due to intrinsic unstable nature of Y211 particle +liquid phase mixture. In this work, we report the successful growth of single-domain YBCO bulk superconductors by a bottom-seeded melt growth (BSMG) method. Investigations on the trapped magnetic field and the microstructures of the synthesized specimens show that a bottom-seeded melt growth method has hardly affected on the crystal growth behavior, the microstructure development and the magnetic properties of the large grain YBCO bulk superconductors. The bottom-seeded melt growth method is clearly beneficial for the stable control of seed orientation through the melt process for the fabrication of a large grain YBCO bulk superconductor.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.716-719
• /
• 1995

Pd/(Pt/Co/Pt) modulated multilayer films have been deposited on various substrates with Pd/Pt buffer layers. Films grown at different temperatures have very distinct magnetic properties and surface microstructures. Atomic force(AFM) and scanning tunneling (STM) microscopies studies of these films reveal that films deposited at room temperature have small grain structures with an average grain size of about $140\;{\AA}$. However, much larger grains of about $1200\;{\AA}$ in size are observed in the films grown on buffer layers which were deposited at $500^{\circ}C$. These large grains are found to actually consist of smaller grains of about $170{\AA}$ in diameter. SQUID magnetic and Kerr hysteresis loop measurements indicate that multilayer films with large grains exhibit high magnetic coercivities of around 5 kOe. A subgrain growth model is proposed to understand the observed grain structures in the multilayers.

• 연구논문집
• /
• 통권27호
• /
• pp.183-200
• /
• 1997

We have calculated the energy of three distinct grain configurations, namely completely connected, partially connected and unconnected configurations, evolving during a spheroidization of polycrystalline thin film by extending a geometrical model due to Miller et al. to the case of spheroidization at both the surface and film-substrate interface. "Stabilitl" diagram defining a stable region of each grain configuration has been established in terms of the ratio of grain size to film thickness vs. equilibrium wetting or dihedral angles at various interface energy conditions. The occurrence of spheroidization at the film-substrate interface significantly enlarges the stable region of unconnected grain configuration thereby greatly facilitating the occurrence of agglomeration. Complete separation of grain boundary is increasingly difficult with a reduction of equilibrium wetting angle. The condition for the occurrence of agglomeration differs depending on the equilibrium wetting or dihedral angles. The agglomeration occurs, at low equilibrium angles, via partially connected configuration containing stable holes centered at grain boundary vertices, whereas it occurs directly via completely connected configuration at large equilibrium angles except for the case having small surface and/or film-substrate interface energy. The initiation condition of agglomeration is defined by the equilibrium boundary condition between the partially connected and unconnected configurations for the former case, whereas it can, for the latter case, largely deviate from the equilibrium boundary condition between the completely connected and unconnected configurations because of the presence of a finite energy barrier to overcome to reach the unconnected grain configuration.

• Journal of Welding and Joining
• /
• 제20권5호
• /
• pp.78-86
• /
• 2002

A metallurgical model for the prediction of prior austenite grain size considering the dissolution kinetics of M$_3$C precipitates at the heat affected zone of SA508-cl.3 was proposed. The isothermal kinetics of grain growth and dissolution were respectively described by well-known equation, $dD/dT=M({\Delta}F_{eff})^M$ and Whelan's analytical model. The isothermal grain growth experiments were carried out for measure the kinetic parameters of grain growth. The precipitates of the base metal and the specimens exposed to thermal cycle were examined by TEM-carbon extraction replica method. The model was assessed by the comparison of BUE simulation experiments and showed good consistencies. However, there was no difference between the model considering and ignoring $M_3C$ precipitates. It seems considered that pinning force exerted by $M_3C$ Precipitates was lower than driving force for grain growth due to large size and small fraction of precipitates, and mobility of grain boundary was low in the lower temperature range.