• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.467-472
• /
• 2020

Methods for deriving design input-parameters to ensure the stability of a structure on a common ground are generally well known. Folded metamorphic rocks, such as the study area, are highly foliated and have small faults parallel to the foliation, resulting in special research methods and tests to derive design input parameters, Etc. are required. The metamorphic rock ground with foliation development of several mm intervals has a direct shear test on the foliation surface, the strike/dip mapping of the foliation, the boring investigation to determine the continuity of the foliation, and the rock mass rating of the metamorphic rock. etc. are required. In the case of a large number of small foliation-parallel faults developed along a specific foliation plane, it is essential to analyze the lineament, surface geologic mapping for fault tracing, and direct shear test. Folded ground requires additional geological-structural-domain analysis, discontinuity analysis of stereonet, electrical resistivity exploration along the fold axis, and so on.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.43-51
• /
• 2001

As the density of memories increases, unwanted interference between cells and coupling noise between bit-lines are increased. And testing high-density memories for a high degree of fault coverage can require either a relatively large number of test vectors or a significant amount of additional test circuitry. So far, conventional test algorithms have focused on faults between neighborhood cells, not neighborhood bit-lines. In this paper, a new test algorithm for neighborhood bit-line sensitive faults (NBLSFs) based on the NPSFs(Neighborhood Pattern Sensitive Faults) is proposed. And the proposed algorithm does not require any additional circuit. Instead of the conventional five-cell or nine-cell physical neighborhood layouts to test memory cells, a three-cell layout which is minimum size for NBLSFs detection is used. Furthermore, to consider faults by maximum coupling noise by neighborhood bit-lines, we added refresh operation after write operation in the test procedure(i.e.,$write{\rightarrow}\;refresh{\rightarrow}\;read$). Also, we show that the proposed algorithm can detect stuck-at faults, transition faults, coupling faults, conventional pattern sensitive faults, and neighborhood bit-line sensitive faults.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1867-1879
• /
• 1997

DREAM-S is a distributed main-memory database system for the real-time processing of shared operational datra in ATM switching systems. DREAM-S has a client-server architecture in which only the server has the diskstorage, and provides the T-Tree index structure for efficient accesses to the data. We propose a recovery technique for the T-Tree index structre in DREAM-S. Although main-memory database system offer efficient access performance, the database int he main-memory may be broken when system failure such as database transaction failure or power failure occurs. Therfore, a recovery technique that recovers the database (including index structures) is essential for fault tolerant ATM switching systems. Proposed recovery technique relieves the bottleneck of the server processors disk operations by maintaining the T-Tree index structure only in the main-memory. In addition, fast recovery is guaranteed even in large number of client systems since the T-Tree index structure(s) in each system can be recovered cncurrently.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.6
• /
• pp.55-65
• /
• 2019

With the rapid development of the national industry, the importance of electrical safety was recognized because of a lot of new electrical equipment are installing and the electrical accidents have been occurring annually. Today, the electrical equipments is inspect by using the portable Infrared thermal imaging camera. but the most negative element of using the camera is inspected for only state of heating, the reliable diagnosis is depended with inspector's knowledge, and real-time monitoring is impossible. This paper present the infrared thermal imaging safety diagnosis system. This system is able to monitor in real time, predict the state of fault, and diagnose the state with analysis of thermal and power data. The system consists of a main processor, an infrared camera module, the power data acquisition board, and a server. The diagnostic algorithm is based on a mathematical model designed by analyzing the Pearson's Correlation Coefficient between temperature and power data. To test the prediction algorithm, the simulations were performed by damaging the terminals or cables on the switchboard to generate a large amount of heat. Utilizing these simulations, the developed prediction algorithm was verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2755-2762
• /
• 1997

Open Network Management Systems (NMS) are not sufficient to use in a large and complex computer network environment because many-year experiences and skills are requeired for using NMS. And also, customizing NMS means a difficult programming with API(Application programming Interface) supplied by NMs. The more intelligent NMS you want, the more difficult programming you must do. In this paper, we proposed an intelligent network management system suign a structure of multiple and distributed expert systems, so as to represent expertises and knowledges of network managers into rule format, maintain the knowledgesstructurally and perform the network managmenet intelligently. expert system for amanaging computer network should understand the management protocol, analyze messages from agents, take a proper action, and report the situations by pre-defined network operation principle and strategy. A multiple expert sytem is composed of monitor expert module, fault expert module and manager expert module which are controlled by enconded knowledges.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1797-1803
• /
• 1997

Message handling function of the SS7(Signaling System N0.7) provides signaling traffic routing capabilities to transfer the signaling traffic to the destination nodes in the signaling network. This message handling function should be handled without any transfer delay for real time processing of large amount of signaling traffic for data communication service, and visual information service. In this paper, we suggest two routing algorithms working on the distributed message handling processors which were specially designed for message handling function. The one is an internal distributing algorithm for equal distribution of signaling traffic among the distributed message handling processors and the other is a distributing algorithm for distribution of signaling traffic in the multiple signaling routes. Both of algorithms are using signaling link selection codes labled in each signaling messages. It is shown that the suggested algorithms are very efficient for routing signaling traffic at the fault condition of signaling routes and the restoration of unavailable signaling routes.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1900-1906
• /
• 1997

In this paper, the efficient BILBO(named EBILBO) is designed for BIST that is able to batch the testing when circuit is designed on FPGA. The proposed algorithm of batch testing is able to test the normal operation speed with one-pin-count that can control all part of large and complex circuit. PRTPG is used for the test pattern and MISR is used for PSA. The proposed algorithm of batch testing is VHDL coding on behavioral description, so it is easily modified the model of test pattern generation, signature analysis and compression. The EBILBO's area and the performance of designed BIST are evaluated with ISCAS89 benchmark circuit on FPGA. In circuit with above 600 cells, it is shown that area is reduced below 30%, test pattern is flexibly generated about 500K and the fault coverage is from 88.3% to 100%. EBILBO for the proposed batch testing BIST is able to execute concurrently normal and test mode operation in real time to the number of $s+n+(2^s/2^p-1)$ clock(where, in CUT, # of PI;n, # of register, p is order # of polynomial). The proposed algorithm coded with VHDL is made of library, then it well be widely applied to DFT that satisfy the design and test field on sme time.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2032-2033
• /
• 2007

There has been increasing interests of condition monitoring and diagnosis for electric equipment, which lead to the development of this system domestic and abroad. In the past, operators' interest was how to quickly repair and restore the electric equipments after failure. But, due to the North American Blackout in 2003 and the aging of equipments, users have paid attention to the condition based monitoring of electric equipment to prevent a fault like outrage. GIS-PDS("GIS Preventive and Diagnosis System") requiresa large amount of measurement data with timeliness for monitoring and analysis of real-time state of GIS(Gas Insulated Switchgear). We developed the timeliness-guaranteed communication device for GIS-PDS.

• Conservation Science in Museum
• /
• v.14
• /
• pp.7-12
• /
• 2013

The conservation has been conducted for the fragments of an wooden boat in the Neolithic Age, excavated from Bibong-ri, Changnyeong, Korea. The vacuum-freeze drying have been applied to mostly to the small relics, such as wooden lacquerwares or small wooden goods etc.. Therefore, the large objects like a wooden boats have been treated almost by air-drying after impregnation with aqueous PEG solution. The air-drying is needed to impregnate with PEG aqueous solution during long period and run the risk of the fault generation. This report explain an example adapted for the fragments of the wooden boat by humidity-controlled drying(HCD) with slow adjusting moisture content. We did the chemical pre-treatment, PEG aqueous solution. The concentration of the aqueous solution was increased gradually from 10% to 80%. After the impregnation, the objects were dried by the HCD. The dimensional stability of the fragments after treatment was good.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.1
• /
• pp.77-84
• /
• 2002

An cluster system used consist of large number of running servers, one has the problem that does the low availability occured by the high chance of the server failures and it is difficult to provide occuring software aging. In this paper, running cluster web servers consists of n primary servers and k backup servers, based on the operational parameters such as number of running primary servers, number of backup severs, rejuvenation period, rejuvenation time, failure rate of sewers, repair rate of servers, unstable rate of servers. We calculate to evaluate the rejuvenation policy such steady-state probabilities, downtime, availability, and downtime cost. We validate the solutions of mathematical model by experiments based on various operation parameters and find that the software rejuvenation method can be adopted as prventive fault tolerant technique for stability of system. The failure rate and unstable rate of the servers are essential factors for decision making of the rejuvenation policies.