• 한국해양공학회지
• /
• 제33권5호
• /
• pp.387-393
• /
• 2019

In this study, the free motion of a riser due to vortex shedding was numerically simulated with Large Eddy Simulation (LES) and Detached Eddy Simulation (DES) turbulence models. A numerical simulation program was developed by applying the Rhie-Chow interpolation method to the pressure correction of the OpenFOAM standard solver pimpleDyMFoam. To verify the developed program, the vortex shedding around the fixed riser at Re = 3900 was calculated, and the results were compared with the existing experimental and numerical data. Moreover, the vortex-induced vibration of a riser supported by a linear spring was numerically simulated while varying the spring constant. The results are compared with published direct numerical simulation (DNS) results. The present calculation results show that the numerical method is appropriate for simulating the vortex-induced motion of a riser, including lock-in phenomena.

• 한국항공우주학회지
• /
• 제37권10호
• /
• pp.955-966
• /
• 2009

초음속 유동장 내의 축대칭 기저유동에 DES 기법을 적용하였다. 이 기법은 RANS 모드에서는 Spalart-Allmaras (S-A) 난류 모델을 사용하고, Large-eddy simulation (LES) 모드에서는 부격자 모델을 기반으로 하고 있다. LES 보다 비교적 적은 비용을 갖는 DES 기법을 사용하여 기저 유동장과 기저 압력을 정교게 예측할 수 있었다. 기저유동의 정확한 예측을 위해 경계층 두께, 운동량 두께, 표면마찰과 같은 기저 가장자리 유동 물성치를 Dutton 등의 실험과 비교하였다. DES는 하류영역에서의 전단층 말림, 큰 에디 운동, 재순환영역 내의 작은 에디 운동 같은 비정상 난류 운동의 물리적 현상을 잘 모사 하였다. 또한, 경험상수 $C_{DES}$ 1.2를 사용한 현재 결과가 일반적인 경험상수 $C_{DES}$ 0.65에 비해 실험과 잘 일치함을 보여준다.

• 대한기계학회논문집B
• /
• 제25권7호
• /
• pp.885-894
• /
• 2001

A large eddy simulation(LES) is performed for turbulent flow in a combustion device. The combustion device is simplified as a cylinder with sudden expansion. To promote turbulent mixing and to accommodate flame stability, a flame holder is attached inside the combustion chamber. Emphasis is placed on the flow details with different geometries of the flame holder. The subgrid scale models are applied and validated. The simulation code is constructed by using a general coordinate system based on the physical contravariant velocity components. The calculated Reynolds numbers are 5000 and 50000 based on the bulk velocity and the diameter of inlet pipe. The predicted turbulent statistics are evaluated by comparing with the LDV measurement data. The agreement of LES with the experimental data is shown to be satisfactory.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권3호
• /
• pp.437-446
• /
• 2003

A large eddy simulation (LES) is performed for turbulent pipe flow. The simulation code is constructed by using a general coordinate system based on the physical contravariant velocity components. The effects of grid fineness which can be well prediction of turbulent behavior in near wall region is investigated. The subgrid scale turbulent models are applied and validated emphasis is placed on the flow details of turbulent pipe flow The calculated Reynolds number is 360 based on the wall shear velocity and the inlet pipe diameter. The predicted turbulent statistics are evaluated by comparing with the DNS data of turbulent pipe flow Performed by Eggels et al. The agreement of LES with DNS data is shown to be satisfactory. The proper grid fineness of the well prediction of turbulent pipe flow is suggested and the turbulent behavior is analyzed by depict the contour plot of fluctuating velocity components.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.193-198
• /
• 2003

A gas turbine blade has an internal cooling passage equipped with ribs, which can be modeled as a ribbed channel. We have studied a flow inside a ribbed channel using large eddy simulaton (LES) with a dynamic subgrid-scale model. The simulation results are compared with the experimental ones. The turbulence intensity and local heat transfer near the rib have not been well captured by the conventional Reynolds averaged Navier-Stokes simulation (RANS). However, these variables obtained by the present LES agree well with those from experiments. From the instantaneous velocity and temperature fields, we explain the mechanisms responsible for the local peaks in the heat transfer distribution along the channel wall. We have also investigated the effect of rotation on the flow and heat transfer in the ribbed channel.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1088-1094
• /
• 2002

A channel flow with a high Reynolds number but coarse grids is numerically studied to investigate the prediction possibility of its turbulence which is three-dimensional and time-dependent. In the present paper, a Reynolds-Averaged Navier-Stokes (RANS) model, a Large Eddy Simulation (LES) and a Navier-Stokes equation with no model are tested with a new approach of hybrid RANS/LES, which reduces to RANS model in the boundary layers and at separation, and to Smagorinsky-like LES downstream of separation, and then compared with each other. It is found that the simulations of hybrid RANS/LES method sustain turbulence like those of LES and with no model, and the results are stable and fairly accurate. This indicates strongly that gradual improvements could lead to a simple, stable, and accurate approach to predict turbulence phenomena of wall-bounded flow.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.181-188
• /
• 2005

Large eddy simulation(LES) methodology used to model the isothermal swirling flows in a dump combustor and the turbulent premixed flame in a model gas turbine combustor. The LES solver was implemented on parallel computer consisting 16 processors. In isothermal flow simulation, the results was compared with that of ${\kappa}-{\varepsilon}$ model as well as experimental data, in order to verify the capability of LES code. To model the turbulent premixed flame in a gas turbine, the G-equation flamelet model was used. The results showd that LES and RANS well predicted the mean velocity field of a non-swirling flow. However, in swirling flow, LES showed a better performance in predicting the mean axial and azimuthal velocities, and the central recirculation zone than those of RANS. In a model gas turbine combustor, the operation condition of high pressure and temperature induced the different phenomena, such as flame length and flow-field information, comparing with the condition of ambient pressure and temperature. Finally, it was identified that the flame and heat release oscillations are related to the vortex shedding generated by swirl flow and pressure wave propagation.

• 한국산학기술학회논문지
• /
• 제10권3호
• /
• pp.507-514
• /
• 2009

본 연구에서는 재순환 유동 현상을 포함하는 후향 계단에서 난류 유동장에 대한 LES의 예측성능을 검토하였다. LES의 난류모델로서 Localized Dynamic ksgs-equation 모델이 적용되었으며, 계산시간의 절감을 위하여 16개의 프로세서를 이용한 병렬계산이 수행되었다 후향 계단의 층류 유동에 대한 직접수치모사(DNS)의 수행 결과, 본 계산 결과는 기존의 실험 및 수치결과를 매우 잘 예측하였다. 또한 중간 및 높은 Re 수에 해당되는 난류 영역의 LES 결과는 평균 재순환 유동특성을 비교적 잘 예측하였다. 위 결과를 통해 본 연구에서 개발된 LES 프로그램은 향후 실용 연소기에서 연소 불안정성 및 연소 소음 등의 해석에 유용할 것으로 기대된다.

• 한국전산유체공학회지
• /
• 제13권3호
• /
• pp.28-34
• /
• 2008

In engineering application of large eddy simulation, there are still questions as follows grid dependency on numerical results, the effect of upwind scheme against a calculation instability, appropriate boundary conditions dealing with turbulence fluctuation and the performance of SGS models. In this study, in order to develop the LES to the engineering application, large eddy simulation was carried out to investigate the effect of upwind scheme, turbulent subgrid model and the grid dependancy of the flow around a wall-mounted cube in a channel at Re=40,000 based on cubic height and bulk mean velocity. The computed velocities, turbulence quantities, separation and reattachment length were evaluated compared with the experimental results of R. Matinuzzi and C. Tropea.

• 동력기계공학회지
• /
• 제19권6호
• /
• pp.19-25
• /
• 2015

The unsteady-state, incompressible and three-dimensional large eddy simulation(LES) was carried out to analyze the aerodynamic performance of three-dimensional small-size axial fan(SSAF) with the different depth of bellmouth. The static pressure coefficients analyzed by LES predict a little bit larger than measurements except stall region regardless of the installation depth between SSAF and bellmouth. Moreover, static pressure efficiencies analyzed by LES show about maximum 30% at the actual operating point ranges, but measurements do not. Therefore, if the blades of conventional SSAF have some more rigidity and complete dynamic balance, the aerodynamic performance of SSAF will be some more improved. In consequence, LES shows the best prediction performance in comparison with any other Reynolds averaged Navier-Stokes(RANS) method.