• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.811-823
• /
• 2000

In design and manufacturing airframe structures which are composed of a lot of sub-assemblies and large complex profile shapes it is difficult to reduce so called hardware variations. Accordingly cost increasing factors for manufacturing airframe parts are much more than other machine parts because of the variability of fabricated details and assemlies. To improve cost and quality, accurate assembly methods and DPD techniques are proposed in this paper which are based upon using CAD/CAM techniques, the concept of KC's and the coordinated datum and index throughout the design, tooling, manufacturing and inspection. The proposed methods are applied to produce fuselage frame assemblies and related engineering aspects are described regarding the design of parts and tools in the context of concurrent digital definition. First articles and consequent mass production of frame assemblies shows a great improvement of the process capability ratio from 0.7 by the past processes to 1.0 by the proposed methods in addition to the cost reduction due to the less number of tools, reduced total assembly times and the space compaction needed by massive inventory. The need to achieve better Cpk, however, and future studies to be investigated will be addressed briefly.

• 대한가정학회지
• /
• 제30권2호
• /
• pp.113-137
• /
• 1992

The purpose of this study was to figure out the urban establishing families' economic structures(income, expenditure, assets, first-present-future housing cost etc.), the states of first-present housing, the future housing plans, and the housing preferences. For this purpose 274 establishing families in Seoul and its metro-politan area were interviewed through the standardized questionnares. Finally 264 questionnares were analyzed. The major findings were as follows; 1. The important source of their monthly incomes was the labor income. But there was often the transfer income from their parents. And the important items of monthly expenditures were savings and foods. In higher income classes, the traffic cost was important relatively. 2. It was found that the urban establishing families were very dependent on their parents for their first-present housing costs. The dependency was stronger in high education classes compared to the low. This was the case in future housing costs. 3. The states and changes of first-present housing showed the demands for an apartment, homeowership, and privacy. These tendencies were higher in high education classes compared to low education classes, but the demands for future housing were according to the monthly income. The present locations were determined majorly by the distance from office and parents. 4. Their housing preferences were different from the present housing states. Furnished rental housing, open living space, large common spaces, and common using of unusual appliances etc. were more preferred by high education classes compared to low education classes.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.459-466
• /
• 2001

The floor vibration aspect for building structures which are in need of large open space are influenced by the interrelation between natural frequency and working loads. Structures with a long span and low natural frequency have a higher possibility of experiencing excessive vibration induced by dynamic excitation such as human activities. These excessive vibrations make the residents uncomfortable and the serviceability deterioration. Need formulation of loads data through actual measurement to apply walking loads that is form of dynamic load in structure analysis. The loads induced by human activities were classified into two types. First type is in place loads. the other type is moving loads. A series of laboratories experiments had been conducted to study the dynamic loads induced by human activities. The earlier works were mainly concerned to parameters study of dynamic loads. In this Paper, the walking loads have been directly measured by using the measuring plate in which two load cells were placed, the parameters, the load-time history of walking loads, and the dynamic load factors have been analyzed. Moreover, the shape of the harmonic loads which were gotten by decomposition the walking loads have been analyzed , and the walking loads modeling have been carried out by composition these harmonic loads derived by functional relation.

• 전산구조공학
• /
• 제7권3호
• /
• pp.123-131
• /
• 1994

본 논문에서는 열응력을 이용해 구조물의 진동을 제어하기 위한 방법을 제시하였다. 구조물에 열응력을 발생시키리 위하여 써멀액츄에이터를 사용하였으며 저주파 진동을 제어하는데 이 써멀액츄에이터가 효과적으로 이용될 수 있음을 확인하였다. 열응력에 의한 제어방법은 열전달에 소요되는 시간지연 문제 때문에 고주파수의 진동을 갖는 구조물보다는 거대한 우주구주물과 같이 비교적 고유진동수를 갖는 구조물에 효과적으로 적용될 수 있다. 외팔보의 진동제어를 수행하기 위하여 보상기 설계에 의한 제어이론과 관측기 설계를 포함하는 최적제어 및 강인제어이론을 사용하였다. 또한 수치해석 시뮬레이션을 통하여 본 연구에서 사용한 제어이론들이 열응력을 이용한 구조물의 진동제어에 매우 효과적임을 보였다.

• Structural Engineering and Mechanics
• /
• 제41권1호
• /
• pp.113-137
• /
• 2012

Frame structures with viscoelastic (VE) dampers mounted on them are considered in this paper. It is the aim of this paper to compare the dynamic characteristics of frame structures with VE dampers when the dampers are modelled by means of different models. The classical rheological models, the model with the fractional order derivative, and the complex modulus model are used. A relatively large structure with VE dampers is considered in order to make the results of comparison more representative. The formulae for dissipation energy are derived. The finite element method is used to derive the equations of motion of the structure with dampers and such equations are written in terms of both physical and state-space variables. The solution to motion equations in the frequency domain is given and the dynamic properties of the structure with VE dampers are determined as a solution to the appropriately defined eigenvalue problem. Several conclusions concerning the applicability of a family of models of VE dampers are formulated on the basis of results of an extensive numerical analysis.

• 한국공간구조학회논문집
• /
• 제13권2호
• /
• pp.93-99
• /
• 2013

Korea has been striving for the development of the nation in various aspects. It will also have to make an effort for its continued development in the future. The problems of low-income groups that occur in those processes cannot be simply ignored now. It is needed to provide an equal opportunity to low-income groups so that they can be part of the society. The cycle of economic problem should be disconnected through this process. Farm-Housing is one of the solutions to this problem. Its purposes are not only to provide residence in the complex, but to gain income through various activities, such as production, distribution and consumption, and solve part of the economic problems of the people living in the Farm-Housing. To sell the products of Farm-Housing, the neighboring cities need to be designated as a hinterland. For this reason, Farm-Housing needs to be located in the suburban area of large cities. However, the current laws and policies make it difficult to construct Farm-Housing in suburban areas. Presenting plans to solve such problem is the purpose of this paper.

• 한국해안해양공학회지
• /
• 제12권2호
• /
• pp.96-106
• /
• 2000

최근에까지 대형구조물이 해양공간이용의 목적으로 외해공항 및 해양터미날로 건설되어 왔다 그러나 때로는 이와같은 큰 규모의 구조물은 파량에 대해 현저한 벽으로 작용하게 되고 해안에 심각한 침식현상을 야기하게 된다 본 연구는 해안선으로부터 각기 다른 거리에 외해구조물을 건설할 때에 해저지형변화를 다룬 것으로 일련의 3차원 이동상실험으로 상세히 조사하였다 또한 해빈류와 외해구조물 배후의 국소침식과의 관계를 분명하게 하기 위하여 수리모델실험과 같은 규격으로 Boussinesq방정식 모델로 해빈류를 계산하고 비교하였다.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.47-56
• /
• 2017

Considerable achievements in developing structural regulators as an important method for vibration control have been made over the last few decades. The use of large quantities of cables in traditional wired control systems to connect sensors, controllers, and actuators makes the structural regulators complicated and expensive. A wireless decentralized control experimental platform based on Wi-Fi unit is designed and implemented in this study. Centralized and decentralized control strategies as sample controllers are employed in this control system. An optimal control algorithm based on Kalman estimator is embedded in the dSPACE controller and the DSP controller. To examine the performance of this control scheme, a three-story steel structure is developed with active mass dampers installed on each floor as the wireless communication platform. Experimental results show that the wireless decentralized control exhibits good control performance and has various potential applications in industrial control systems. The proposed experimental system may become a benchmark platform for the validation of the corresponding wireless control algorithm.

• 대한원격탐사학회지
• /
• 제10권2호
• /
• pp.49-62
• /
• 1994

Look direction bias in a single look SAR image can often be misinterpreted in the geological application of radar data. This paper investigates digital processing techniques for SAR image data integration and compensation of the SAR data look direction bias. The two important approaches for reducing look direction bias and integration of multiple SAR data sets are (1) principal component analysis (PCA), and (2) wavelet transform(WT) integration techniques. These two methods were investigated and tested with the ERS-1 (VV-polarization) and CCRS*s airborne (HH-polarization) C-SAR image data sets recorded over the Sudbury test site, Canada. The PCA technique has been very effective for integration of more than two layers of digital image data. When there only two sets of SAR data are available, the PCA thchnique requires at least one more set of auxiliary data for proper rendition of the fine surface features. The WT processing approach of SAR data integration utilizes the property which decomposes images into approximated image ( low frequencies) characterizing the spatially large and relatively distinct structures, and detailed image (high frequencies) in which the information on detailed fine structures are preserved. The test results with the ERS-1and CCRS*s C-SAR data indicate that the new WT approach is more efficient and robust in enhancibng the fine details of the multiple SAR images than the PCA approach.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.665-675
• /
• 2019

The wire-wrapped fuel bundle is an assembly design in a sodium-cooled fast reactor. A wire spacer is used to maintain a constant gap between rods and to enhance the mixing of coolants. The wire makes the flow complicated by creating a sweeping flow and vortex flow. The vortex affects the flow field and heat transfer inside the subchannels. However, studies on vortices in this geometry are limited. The purpose of this research is to investigate the vortex flow created in the wire-wrapped fuel bundle. For analysis, a RANS-based numerical analysis was conducted for a 37-pin geometry. The sensitivity study shows that simulation with the shear stress transport model is appropriate. For the case of Re of 37,100, the mechanisms of onset, periodicity, and rotational direction were analyzed. The vortex structures were reconstructed in a three-dimensional space. Vortices were periodically created in the interior subchannel three times for one wire rotation. In the edge subchannel, the largest vortex occurred. This large vortex structure blocked the swirl flow in the peripheral region. The small vortex formed in the corner subchannel was negligible. The results can help in understanding the flow field inside subchannels with sweeping flow and vortex structures.