• 융합신호처리학회논문지
• /
• 제10권2호
• /
• pp.106-111
• /
• 2009

실시간 영상 안정화 기술은 손떨림에 의한 휴대용 카메라 혹은 외부적 조건에 의한 고정 카메라의 흔들림 보상에 이용된다. 본 논문은 비교적 큰 외부적 요인으로 인하여 발생하는 동영상의 흔들림에 대한 대책에 관한 것이다. 동영상 안정화 파라메터로 이용되는 기준 프레임에 대한 현재 프레임의 변위를 얻기 위하여 DFT에 기반한 위상 상관법을 이용한다. 그리고 위상 상관지도에서의 효율적이고 안정적인 탐색을 위하여 칼만 필터를 이용하여 탐색 범위를 추정하는 방법과 안정적인 성능과 실시간 처리에 필요한 조건을 실험적으로 찾아내고 그 조건을 제시한다. 중심 지점에 대한 평균밝기의 표준편차 값을 동영상 안정화의 성능 평가 척도로 제안하고 가상 흔들림 동영상과 실제 흔들림 동영상에 대하여 성능을 서로 비교하였다.

• 한국지진공학회논문집
• /
• 제6권4호
• /
• pp.39-49
• /
• 2002

본 연구에서는 저경도 고무받침 시험체의 다양한 특성실험을 통하여 저경도 고무받침의 특성을 파악하였다. 고무받침의 파악하고자 하는 특성은 변위 의존성, 반복재하특성, 진동수 의존성, 면압 의존성, 온도 의존성, 극한전단특성, 수직강성 및 전단변형능력 등이다. 특성실험결과, 저경도 고무받침의 특성치는 변위와 면압의 영향을 크게 받는 것으로 나타났으며, 진동수가 증가할수록 유효강성과 등가감쇠비가 조금 증가하며, 반복재하의 영향을 거의 받지 않았다. 그리고 대변형에 의해 변형경화 영역을 경험한 고무받침은 전단탄성계수가 저하되나, 시간이 경과하면서 일부 회복됨을 확인하였다. 끝으로, 전단파괴실험을 수행하였으며, 축소 시험체의 경우에 전단파괴가 전단변형률 490% 근처에서 진행되었고 실물의 경우에는 430%에서 진행되었다

• Structural Engineering and Mechanics
• /
• 제73권5호
• /
• pp.529-542
• /
• 2020

As limited well-documented experimental data are available for assessing the attributes of different deformation components of flanged walls, few appropriate models have been established for predicting the inelastic responses of flanged walls, especially those of asymmetrical flanged walls. This study presents the experimental results for three large-scale T-shaped reinforced concrete walls and examines the variations in the flexural, shear, and sliding components of deformation with the total deformation over the entire loading process. Based on the observed deformation behavior, a simple model based on moment-curvature analysis is established to estimate flexural deformations, in which the changes in plastic hinge length are considered and the deformations due to strain penetration are modeled individually. Based on the similar gross shapes of the curvature and shear strain distributions over the wall height, a proportional relationship is established between shear displacement and flexural rotation. By integrating the deformations due to flexure, shear, and strain penetration, a new load-deformation analytical model is proposed for flexure-dominant flanged walls. The proposed model provides engineers with a simple, accurate modeling tool appropriate for routine design work that can be applied to flexural walls with arbitrary sections and is capable of determining displacements at any position over the wall height. By further simplifying the analytical model, a simple procedure for estimating the ultimate displacement capacity of flanged walls is proposed, which will be valuable for performance-based seismic designs and seismic capacity evaluations.

• 한국지반환경공학회 논문집
• /
• 제20권12호
• /
• pp.5-14
• /
• 2019

최근 우리나라에서 지진이 발생하여 대도시의 초고층 건물의 내진연구가 증가하고 있다. 하지만 대부분의 초고층 건물의 내진연구 및 해석은 지반을 간접적으로 고려하고 있다. 또한 지진파 탁월주기의 영향이 거의 고려되고 있지 않는 실정이다. 따라서 본 연구에서는 지진파 탁월주기가 초고층 건물 동적거동에 미치는 영향이 지반을 고려하는 연속체 모델을 적용하여 분석되었다. 이를 위해 유한요소기반의 수치해석 프로그램인 MIDAS GTS NX를 사용하여 선형시간이력해석을 적용한 2D 동적해석을 수행하였다. 또한 동적거동 분석을 위해 수평변위, 층간변위비, 휨응력 및 건물 취약부를 이용하였다. 연구 결과, 전반적으로 초고층 건물은 지진파 탁월주기가 길어질수록 더 큰 동적반응이 발생하였다. 또한 지진파 탁월주기가 다른 파라미터인 지반조건, 지진파 크기보다 더 큰 영향을 주는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제11권1호
• /
• pp.35-48
• /
• 2001

The objective of this study is to investigate the stability behavior of steel cable-stayed bridges by comparing the buckling loads obtained by means of finite element methods with eigen-solver. In recent days, cable-stayed bridges dramatically attract engineers' attention due to their structural characteristics and aesthetics. They require a number of design parameters and present a high degree of static indetermination, especially for long span bridges. Cable-stayed bridges exhibit several nonlinear behaviors concurrently under normal design loads due to the individual nonlinearity of substructures such as the pylons, stay cables, and bridge deck, and their interactions. The geometric nonlinearities arise mainly from large displacements of cables. Strong axial and lateral forces acting on the bridge deck and pylons cause structural nonlinear behaviors. The interaction is among the substructures. In this paper, a typical three-span steel cable-stayed bridge with a variety of design parameters has been investigated. The numerical results indicate that the design parameters such as the ratio of $L_1/L$ and $I_p/I_b$ are important for the structural behavior, where $L_1$ is the main span length, L is the total span length of the bridge, $I_p$ is the moment of inertia of the pylon, and $I_b$ is the moment of inertia of the bridge deck. When the ratio $I_p/I_b$ increases, the critical load decreases due to the lack of interaction among substructures. Cable arrangements and the height of pylon are another important factors for this type of bridge in buckling analysis. According to numerical results, the bridges supported by a pylon with harp-type cable arrangement have higher critical loads than the bridges supported by a pylon with fan-type cable arrangement. On contrary, the shape of the pylon does not significantly affect the critical load of this type of bridge. All numerical results have been non-dimensionalized and presented in both tabular and graphical forms.

• 한국지반환경공학회 논문집
• /
• 제20권10호
• /
• pp.5-14
• /
• 2019

최근 우리나라에서도 지진이 발생하여 대도시의 초고층 건물의 내진안정성에 대한 관심이 높아져 이에 대한 연구가 증가하고 있다. 또한 대부분의 내진설계 및 해석은 지반을 간접적으로 고려하고 있고, 3D 동적해석을 이용한 내진해석 연구는 미비한 실정이다. 따라서 본 연구에서는 지반을 포함한 SSI 연속체 모델에 기초한 2D 및 3D 동적해석을 수행하고 거동을 비교 분석하였다. 동적해석을 위해 지반범용해석 프로그램인 MIDAS GTS NX를 이용하여 선형시간이력해석을 수행하였다. 이를 위해 초고층 건물이 기반암 위에 시공되고 표층에 묻혀있는 것으로 가정하고, 선정된 파라미터를 기준으로 민감도 분석을 수행하였다. 동적거동은 수평변위, 층간변위비, 휨응력, 취약부를 이용하여 비교 분석하였다. 대부분의 경우, 2D 동적거동은 3D보다 크게 산출하여 더 보수적인 결과를 보였으며, 취약부의 수와 크기는 증가하는 것으로 나타났다.

• Coupled systems mechanics
• /
• 제8권5호
• /
• pp.439-457
• /
• 2019

In this paper, a new application of a four variable refined plate theory to analyze the nonlinear bending of functionally graded plates exposed to thermo-mechanical loadings, is presented. This recent theory is based on the assumption that the transverse displacements consist of bending and shear components in which the bending components do not contribute toward shear forces, and similarly, the shear components do not contribute toward bending moments. The derived transverse shear strains has a quadratic variation across the thickness that satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. The material properties are assumed to vary continuously through the thickness of the plate according to a power-law distribution of the volume fraction of the constituents. The solutions are achieved by minimizing the total potential energy. The non-linear strain-displacement relations in the von Karman sense are used to derive the effect of geometric non-linearity. It is concluded that the proposed theory is accurate and simple in solving the nonlinear bending behavior of functionally graded plates.

• 지질공학
• /
• 제31권1호
• /
• pp.43-53
• /
• 2021

본 연구에서는 부동침하 영향을 고려하여 지진 하중을 받는 1,300 ton 규모의 스테인리스 배수지 구조에 대한 3차원 유한요소 해석을 수행하였다. 1,000 ton 규모 이상의 대용량에 대한 지진하중은 한국표준 규격 규정으로부터 확장하여 산정하였다. 부동침하가 발생한 배수지는 특히 지진하중에 대하여 구조적 거동에 중요한 영향이 발생할 수 있다. 다양한 하중 조합에 대하여 정상상태의 경우, 침하가 고려된 경우, 그리고 수평으로 보강된 경우에 대한 응력 및 변위 분포의 변화를 도출하였다. 수치해석 결과로부터 부동침하가 발생된 배수지는 지진하중 조합에 대하여 최대 변위가 크게 증가하게 됨을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제76권6호
• /
• pp.751-763
• /
• 2020

Available records of recent earthquakes show that near-field earthquakes have different characteristics than far-field earthquakes. In general, most of these unique characteristics of near-fault records can be attributed to their forward directivity. This phenomenon causes the records of ground motion normal to the fault to entail pulses with long periods in the velocity time history. The energy of the earthquake is almost accumulated in these pulses causing large displacements and, accordingly, severe damages in the building. Damage to structures caused by past earthquakes raises the need to assess the chance of future earthquake damage. There are a variety of methods to evaluate building seismic vulnerabilities with different computational cost and accuracy. In the meantime, fragility curves, which defines the possibility of structural damage as a function of ground motion characteristics and design parameters, are more common. These curves express the percentage of probability that the structural response will exceed the allowable performance limit at different seismic intensities. This study aims to obtain the fragility curve for low- and mid-rise structures of reinforced concrete moment frames by incremental dynamic analysis (IDA). These frames were exposed to an ensemble of 18 ground motions (nine records near-faults and nine records far-faults). Finally, after the analysis, their fragility curves are obtained using the limit states provided by HAZUS-MH 2.1. The result shows the near-fault earthquakes can drastically influence the fragility curves of the 6-story building while it has a minimal impact on those of the 3-story building.

• Earthquakes and Structures
• /
• 제22권6호
• /
• pp.625-635
• /
• 2022

High-rise buildings (HRBs) are considered one of the most common structures nowadays due to the population growth, especially in crowded towns. The lack of land in crowded cities has led to the convergence of the HRBs and the absence of any gaps between them, especially in lands with weak soil (e.g., liquefaction-prone soil), but then during earthquakes, these structures may be exposed to the risk of collision between them due to the large increase in the horizontal displacements, which may be destructive in some cases to the one or both of these adjacent buildings. To evaluate methods of reducing the risk of collision between adjacent twin HRBs, this research investigates three vibration control methods to reduce the risk of collision due to five different earthquakes for the case of two adjacent reinforced concrete (RC) twin high-rise buildings of 15 floors height without gap distance between them, founded on raft foundation supported on piles inside a liquefaction-prone soil. Contact pounding elements between the two buildings (distributed at all floor levels and at the raft foundation level) are used to make the impact strength between the two buildings realistic. The mitigation methods investigated are the base isolation, the tuned mass damper (TMD) method (using traditional TMDs), and the pounding tuned mass damper (PTMD) method (using PTMDs connected between the two buildings). The results show that the PTMD method between the two adjacent RC twin high-rise buildings is more efficient than the other two methods in mitigating the earthquake-induced pounding risk.