• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.266-275
• /
• 2009

Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.1
• /
• pp.67-73
• /
• 1998

In order to find out the environmental factors influencing the catch of anchovy lift nets in kamakbay, the three oceanographic factors, i. e., the water temperature, the salinity, the amount of chlorophyll-a were observed respectively from August 1 to 12, 1995 and from September 20 to 26, 1995, and each of them was compared with the catch of anchovy by the lift net. The results obtained are summerized as follow : 1) The water temperature was ranged from 17.3 to 29.6$^{\circ}C$ and its difference between the surface and bottom was 1 to 3$^{\circ}C$. In the three areas, A, B and C, the area A was the hightest in temperature, the area B being a second, and the area C being the lowest. 2) The salinity was ranged from 32.20 to 33.47$\textperthousand$ and its difference between the surface and bottom was not significant. In the three areas, the area A was the highest in salinity, the area B being a second, and the area C being the lowest. 3) The amount of chlorophyll-a was ranged from 0.19 to 5.30mg/m supper(3) and its difference among the three areas was not significant. Daily variation of the amount was very irregulated because the position operated was changed daily. 4) A comparison of the water temperature, the salinity and the amount of chlorophyll-a with the catch gave that the water temperature and the amount of chlorophyll-a had large influence on the catch and the salinity did not so. However, the influence of the amount of chlorophyll-a was larger than that of the water temperature. 5) The catch of anchovy was large respectively during two hours after sun set and during two hours before sun rise.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.415-418
• /
• 2001

The automatic construction of large, high-resolution image mosaics is an active area of reasearch in the fields of photogrammetry, computer vision, image processing, and computer graphics. In this study, we describe a automatic mosaicing method that makes a panorama from images by placing camera in a emitted-grid. In the images captured by cameras, there must be a matched area and the area is in the particular area of the image. Initial transformation matrix, there(ore, is calculated from points searched in the partial area. It is possible to find best transformation matrix by Levenberg-Marquardt method. Finally, each images are multiplied by blending function and stitched by the transformation matrix to complete panoramic image.

• The Korean Journal of Ecology
• /
• v.17 no.4
• /
• pp.453-461
• /
• 1994

Size class structure and vegetative growth of a perennial herb of the temperate deciduous forests, Symplocarpus renifolius Schott, were studied from 1991 to 1994 in Namhansansung, Kyonggi Province, Korea. The size class structures of leaf number and leaf area per individual followed bell-shape curve, i.e. frequency of middle class was relatively high. The leaf area increased from the late-March to mid-May. At the end of the growing season, leaf area(length X breadth) was proportional to biomass, especially aboveground biomass. The leaf number and leaf area per individual increased at the rate of 0.08 leaf/year and 9.7 $cm^2/year$, respectively. The size of the individuals in large-sized classes, in leaf number and leaf area, decreased in next year, while the size of the individuals in small-sized classes increased. Therefore, it was concluded that the size class structure of S. renifolius population was largely determined by the growth form.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.1
• /
• pp.44-53
• /
• 2012

This paper presents a method to calculate the area of vulnerability by using the impedance building algorithm. The installation of DG (Distributed Generation) is one of the countermeasures against voltage sags in power systems. In order to estimate the effect of the DG, the voltage sag assessment should be performed based on the area of vulnerability and system fault statistics. To determine the area of vulnerability, system impedance matrix should be calculated. The calculation of the impedance matrix of large systems is time-consuming task. This paper addresses an effective scheme to calculate the area of vulnerability and system impedance matrix.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.4
• /
• pp.32-41
• /
• 2012

In recent times, multi-centralization and decentralization as well as large Capital area and suburbanization in the spatial structure of capital area. With rapid growth, urbanization and industrialization are unsystematic, and growth inequality between regions caused negative effects such as discordant centralization and decentralization, fluctuating land value, and gap between living conditions. Accordingly, this study analyzed urban spatial indexes by the self-governed body in the capital area such as Seoul, Incheon, and Gyeonggi province for the analysis of the regional inequality phenomenon. We examined the characteristics of temporal and spatial changes in urban spatial structure in the capital area by utilizing the distribution pattern and density of city indexes such as population, employment, etc, and then drew the commonality of those factors through factor analysis. We evaluated the drawn results through the city standard index by each city, conducted factor score analysis, and identified the interaction between each factor and Housing Purchase Price Composite Indices index, housing rent price index(Housing Jeonse Price Composite Indices), land price fluctuation rate, diffusion ratio of house, and financial independence.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.498-500
• /
• 2009

When we urgently need to develop and supply an alternative energy, wind power is growing with much interest because it has relative low cost for generating power and small area for wind turbine. To estimate the wind power resource, it is necessary to make an observation first. Although the large wind farm and resources are near coast and mountain area, the wind energy in urban area has the strong thing of direct access to power generator. In this study, we estimate the probability of wind energy in urban mountain area using A2C (Atmospheric to CFD) model, which is used for horizontally urban scale phenomena. In the steady state results, the site C is most suitable for wind power in the point of the only wind speed. But, estimating the TKE and vertical wind shear, the site B is showing the better results than the site C.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.318-328
• /
• 2011

Stage-level reconfigurable chip multiprocessor (CMP) aims to achieve highly reliable and fault tolerant computing by using interwoven pipeline stages and on-chip interconnect for communicating with each other. The existing crossbar-switch based stage-level reconfigurable CMPs offer high reliability at the cost of significant area/power overheads. These overheads make realizing large CMPs prohibitive due to the area and power consumed by heavy interconnection networks. On other hand, area/power-efficient architectures offer less reliability and inefficient stage-level resource utilization. In this paper, I propose a hierarchical multiplexing interconnection structure in lieu of crossbar interconnect to design area/power-efficient stage-level reconfigurable CMP. The proposed approach is able to keep the reliability offered by the crossbar-switch while reducing the area and power overheads. Experimental results show that the proposed approach reduces area by up to 21% and power by up to 32% when compared with the crossbar-switch based interconnection network.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.15-20
• /
• 2010

This paper deals with minimizing layout area of FPGA design. FPGAs are becoming increasingly important in the design of ASICs since they provide both large scale integration and user-programmability. This paper describes a method to obtain tight bound on the worst-case increase in area when drivers are introduced along many long wires in a layout. The area occupied by minimum-area embedding for a circuit can depend on the aspect ratio of the bounding rectangle of the layout. This paper presents a separator-based area-optimal embeddings for FPGA graphs in rectangles of several aspect ratios which solves the longest path problem in the constraint graph.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1083-1093
• /
• 2019

The purpose of this study is to detect the burned area change by direct burning of tree canopies and post-fire mortality of trees via analyzing satellite imageries from the Korea multi-purpose satellite-2 and -3 (KOMPSAT-2 and -3) for two large-fires over the Goseong-Sokcho and Gangneung-Donghae regions in April 2019. For each case, the burned area was compared between two dates: the day when the fire occurred and 15-18 days after it. As the results, within these two dates, there was no substantial difference in burned area of sites whose severities were marked as "Extreme", but sites with "High" and "Low" severities showed significant differences in burned area between the two dates. These differences were resulted from the lagged post-fire browning of canopies which was detected by images from in-situ observation,satellite, and the unmanned aerial vehicle. The post-fire browning started after 3-4 days and became apparent after 10-15 days. This study offers information about the timing to quantify the burned area by large fire and about the mechanism of post-fire mortality. Also, the findings can support policy makers in planning the restoration of the damaged areas.