• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.45-50
• /
• 1996

Wood chips of oak(Quercus mongolica) and larch(Larix leptolepis) were treated with low pressure steaming explosion. Main components of exploded wood were separated with hot water and methanol extraction. Crude lignin separated from those extractives were purified and those chemical characteristics were investigated. And also, lignin adhesive was prepared from crude lignin and studied those chemical characteristics. The results can be summarized as follows ; 1. The purified lignin by Bj$\ddot{o}$kman's method from crude lignin is about 30% in exploded oak wood and is about 11% in exploded larch wood as a low amount. 2. The phenolic hydroxyl groups in the purified lignins are little higher than those of MWL and molecular weight distributions of the purified lignins are some lower than that of MWL. 3. Alkaline nitrobenzene oxidation products are very low in the clude lignin but those are increased in the purified lignin 4. The gravity of lignin resins(1.15 and 1.13) are a little lower than that of phenol resin(1.16) and the compressive shearing strength of lignin resins are higher than those of phenol resin.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.8-16
• /
• 2005

In an effort to encourage the development of value added engineered applications for small diameter round timber, research is being conducted to develop and verify design guidelines for connections with specific application to round timbers. The objective of this research is to provide potential users with a number of viable connection options applicable in the fabrication of engineered, round wood structural components and systems. Target uses include trusses, built up flange beams and space frames. This paper presents information on a mortised steel plate connection fabricated using powder driven nails in 6 cm diameter Japanese Larch. The design load for PDN connections are around 1.3 kN per nail with strip and 0.8 kN per nail without stripe. The design model for PDN connectors could be chosen by the number of nails. If the number of nails are more than the critical number between nail bearing and wood failure, the wood failure model could be the way to design the structure safely. The wood failure model needs to be studied more but the model could be the tensile and cleavage mixed failure model.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.7-17
• /
• 1991

The feasibility of treating three softwood(Japanese larch pitch pine, and Korean pine) thinned logs by double-diffusion treatment processes was investigated. Some posts were incised before immersion, and others were imersed in hot copper sulfate solution. Comparison among species indicated that. in general, pitch pine was most treatable and Japanese larch least treatable. For all three species, almost all treatment schedules gave consistently good penetration and high net retention, but very steep gradient of preservative distribution. As expected, the treatability was increased by the extension of immersion time, increased concentration of treating solution, incising. and heating of the first solution. Of the variables tested, it appears that heating of the first solution is the most important. From the data in this paper, it may be concluded that, if the first solution is not heated, the best schedule is #3. If the first solution is healed. it appears the best schedules are #10 or #11. Since heating of the first solution improves the treatability. schedules # 10 or :#11 are recommended if the cost of heating might be justified. The data presented in this paper indicate that double-diffusion treatment processes seem to offer a promise as a comparatively effective and easy-operating method of treating thinned logs for the small-scale production of treated stock.

• Animal cells and systems
• /
• v.10 no.4
• /
• pp.191-196
• /
• 2006

This study was carried out to evaluate soil carbon cycling of a 36-year-old larch (Larix leptolepis) stand in Korea. The aboveground and soil organic carbon storage, litterfall, and soil respiration rates were measured over twoyear periods. The estimated aboveground biomass carbon storage and increment were 4220 gC $m^{-2}$ and 150 gC $m^{-2}\;yr^{-1}$, respectively. Mean organic carbon inputs by needle and total litterfall were 118 gC $m^{-2}\;yr^{-1}$ and 168 gC $m^{-2}\;yr^{-1}$, respectively. The aboveground carbon increment of the stand was similar to the annual input of carbon from total litterfall. The soil respiration rates correlated exponentially with the soil temperature at a depth of 20 cm ($R^2$ = 0.86). In addition, the exponential regression equation indicated a relatively strong positive relationship between the soil respiration rates and soil temperature, while there was no significant relationship between the soil respiration rates and the soil moisture content. The annual mean and total soil respiration rates were 0.40 g $CO_2\;m^{-2} h^{-1}$ and 3010 g $CO_2\;m^{-2}\;yr^{-1}$ over the two-year study period, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.29-38
• /
• 2008

It is well-known that the strength properties of wood connections depend on the density of the wood members, the diameter of the fasteners, the number of fasteners, and the arrangement of the fasteners, etc. In this study, the connection with inserted steel plates and drift pins was made in different configurations. The specimens were Larch and Sugi glulam connections. The specimens were loaded in tension, and the yield loads of the connections were obtained. The values obtained from the tests were compared with the predicted values. Good agreement between the yield loads obtained from the tension failure tests and the predicted yield loads were shown. It was shown that the density of the wood member barely affected the strength properties of the connections. The strength decreases of the Sugi glulam connections by the group effect were less than those of the Larch glulam connections.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.151-159
• /
• 2007

This study was conducted to investigate the effects of thinning on changes in stand characteristics and understory vegetation in a silvopasture practiced Japanese larch plantation in the Research Forest of Kangwon National University, Korea. Three different thinning intensities (64%, 35%, and control) were applied. Before and after thinning, the understory plant species increased its number from 48 (7 tree species, 7 shrubs species, 28 herbaceous species, and 6 woody climbers) to 100 (11 tree species, 15 shrub species, 67 herbaceous species, and 7 woody climbers). Thinning made plants invade easily on the forest floor, and plot A (325 stems/ha) had much higher number of undersory species than those Of plot B (575 stems/ha) and control plot (1,150 stems/ha). In three years after thinning, understory aboveground biomass (kg/ha) of herbs were 523 for control, 1,230 for plot B, and 1,288 for plot A. The canopy coverage had remarkable influence on the understory biomass production, resulting in relatively small amount of herbage production on control plot. The differences were statistically significant between thinned plots and unthinned plot, but there were no significant differences among the thinned plots (p<0.05).

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.436-442
• /
• 2011

In this study, the Total Volatile Organic Compounds (TVOC) emitted from wood-based panels were compared by two analytical methods using the GC/FID and the GC/MS. Japanese Larch, Yellow Poplar, Particle Board (PB) and Medium Density Fiberboard (MDF) were selected as target materials. Major compounds emitted from the panels were Toluene, ${\alpha}$-pinene, ${\beta}$-pinene and limonene. In case of TVOC using GC/FID method, MDF E2 (1,497 ${\mu}g/m^3$) revealed the highest concentration among all wood-based panels, while Japanese Larch (1,772 ${\mu}g/m^3$) showed the highest value with respect to GC/MS method. Furthermore, it was found that the amount of VOC emitted from panels was different depending upon analytical methods. This significant difference was attributed to analytical sensitivities of GC/FID and GC/MS for various VOC. Besides, it was found that the composition ratios of main VOC compounds were not significantly different.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.3
• /
• pp.1-9
• /
• 2021

In this study, we evaluated the accuracy of deep learning-based tree species classification model trained by using high-resolution images. We selected five species classed, i.e., pine, birch, larch, korean pine, mongolian oak for classification. We created 5,000 datasets using high-resolution orthophoto and forest type map. CNN deep learning model is used to tree species classification. We divided training data, verification data, and test data by a 5:3:2 ratio of the datasets and used it for the learning and evaluation of the model. The overall accuracy of the model was 89%. The accuracy of each species were pine 95%, birch 89%, larch 80%, korean pine 86% and mongolian oak 98%.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.1
• /
• pp.110-123
• /
• 2019

This work was conducted to examine the relationship between lignin content and the durability of larch (LAR) pellets. LAR sawdust was immersed in tap water (TW), sulfuric acid (AC) and sodium hydroxide (AK) solutions, and then the immersed sawdust was used for pellet fabrication. Klason lignin (KL) content of the immersed LAR, contents of soluble lignin (SL) and monomeric sugars liberated from the immersion of LAR, and durability of LAR pellets were measured. KL content decreased as the concentration of AC and AK solutions increased, but glucose content increased with increase in AC and AK concentration. Durability of wood pellets fabricated using non-immersed LAR sawdust was the highest, followed by those made using TW-, AK- and AC-immersed sawdust. LAR pellets became more durable as the concentration of KL and SL increased, but a significant positive correlation was found only between pellet durability and KL content. Through the fluorescent microscopic observation and SEM-EDX analysis, it was verified that lignin content of non-immersed LAR pellets was higher than that of AC- and AK-immersed LAR pellets. These results suggest that lignin might contribute to an increase in inter-particle bonding in wood pellets.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.1
• /
• pp.33-39
• /
• 2019

The square timbers of larch having cross section of $90mm{\times}90mm$ were glued laterally to be formed $1,200mm{\times}2,400mm$ panels which were used as cores for CLT wall panels. Then, structural plywood panels having size of $1,200mm{\times}2,400mm$ were used as cross band covering the small square timber cores to manufacture CLT wall panels. The sound absorption rate of CLT wall panels and polyester board attached CLT wall panels were investigated. The mean sound absorption coefficients of the former and the latter in the frequency range of 100-6400 Hz were 0.21 and 0.74, respectively. The noise reduction coefficients (NRC) of those were 0.21 and 0.40, respectively. Also, the mean sound transmission loss of CLT wood panel in the frequency range of 50-1600 Hz was 45.12 dB and that value at the frequency of 500 Hz was 42.49 dB. It was suggested that the polyester board attached CLT wall panels could be used as housing wall because of its high sound absorption rate and high sound transmission loss.