• Journal of Microbiology and Biotechnology
• /
• 제28권6호
• /
• pp.938-945
• /
• 2018

Salinity stress is an important environmental problem that adversely affects crop production by reducing plant growth. The impacts of rhizobacterial strains to alleviate salinity stress on the germination of Lactuca sativa and Raphanus sativus seeds were assessed using different concentrations of NaCl. Plant growth-promoting rhizobacteria (PGPR) strains were also examined to improve the early germination of Chinese cabbage seeds under normal conditions. Lactobacillus sp. and P. putida inoculation showed higher radicle lengths compared with non-inoculated radish (Raphanus sativus) seeds. LAP mix inoculation increased the radicle length of lettuce (Lactuca sativa) seedlings by 2.0 and 0.5 cm at salinity stress of 50 and 100 mM NaCl concentration, respectively. Inoculation by Azotobacter chroococcum significantly increased the plumule and radicle lengths of germinated seeds compared with non-inoculated control. A. chroococcum increased the radicle length relative to the uninoculated seeds by 4.0, 1.0, and 1.5 cm at 50, 100, and 150 mM NaCl concentration, respectively. LAP mix inoculation significantly improved the radicle length in germinated radish seeds by 7.5, 1.3, 1.2, and 0.6 cm under salinity stress of 50, 100, 150, and 200 mM NaCl concentration, respectively. These results of this study showed that PGPR could be helpful to mitigate the salinity stress of different plants at the time of germination.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.28-31
• /
• 2023

This study presents a comprehensive procedure for the low cycle fatigue test of ultrasonically welded (UW) coated conductor (CC) lap-joints. The entire process is examined in detail, from the robust fabrication of the UW REBCO CC joints to the reliability testing under a low number of repeated cycle fatigue conditions. A continuous I_c measurement system enables real-time monitoring of I_c variations throughout the fatigue tests. The study aims to provide a step-by-step procedure that involves joint fabrication, electromechanical property (EMP) tests under uniaxial tension for stress level determination, and subsequent low-cycle fatigue tests. The joints are fabricated using a hybrid method that combines UW with adding In-Sn soldering, achieving a flux-free hybrid welding approach (UW-HW flux-free). The selected conditions for the low cycle fatigue tests include a stress ratio of R=0.1 and a frequency of 0.02 Hz. The results reveal some insights into the fatigue behavior, irreversible changes, and cumulative damage in the CC joints.

• 한국컴퓨터정보학회논문지
• /
• 제21권3호
• /
• pp.57-64
• /
• 2016

This paper deals with the PCB assembly time minimization problem that the PAP (pick-and-placement) machine pickup the K-weighted group of N-components, loading, and place into the PCB placement location. This problem considers the rotational turret velocity according to component weight group and moving velocity of distance in two component placement locations in PCB. This paper suggest heavy-weight component group first pick-and-place strategy that the feeder sequence fit to the placement location Hamiltonean cycle sequence. This algorithm applies the quadratic assignment problem (QAP) that considers feeder sequence and location sequence, and the linear assignment problem (LAP) that considers only feeder sequence. The proposed algorithm shorten the assembly time than iATMA for QAP, and same result as iATMA that shorten the assembly time than ATMA.

• 전기화학회지
• /
• 제1권1호
• /
• pp.40-44
• /
• 1998

pH변화를 정밀하게 측정하기 위하여 빠른 응답특성과 높은 감도를 갖는 전기화학적 전위차를 이용한 LAPS(Light-Addressable Potentiometric Sensor) 소자 및 시스템을 제작하여 그 기초 특성을 조사하였다. 먼저 pH 변화에 따른 LAPS의 정전기적 인 변화특성 및 소자의 변수를 LAPS 등가회로 모델을 이용한 모의실험을 통해 검증하고 이러한 모의 실험을 바탕으로 하여 LAPS 소자 및 시스템을 제작하였다. 제작된 LAPS 시스템은 pH 2-11 사이에서 56 mV/pH의 선형적인 감도를 보였다. 구성된 LAPS 시스템의 다양한 응용성을 도모하기 위한 시도로서 먼저, 일반적인 urea 센서가 가지는 긴 응답시간의 단점을 극복하기 위해 nitrocellulose membrane 에 urease가 고정화된 막을 LAPS에 부착하여 측정한 결과 urease 농도 $50{\mu}g/ml,500{\mu}g/ml$에 대하여 각각 0.29mV/sec, 0.816 mV/sec의 매우빠른 응답특성을 얻을 수 있었다. 또한 환경적 측면에서 중요한 우라닐 이온의 감지를 위하여 우라늄 인식 매체를 LAPS의 감지부에 부착하고 수용액 속에 녹아 있는 우라늄 이온을 측정한 결과 $10^{-11}\~10^{-4}M$의 넓은 농도 범위에서 25mV/decade 감도를 보였다

• 한국농림기상학회지
• /
• 제14권2호
• /
• pp.53-62
• /
• 2012

고해상도 기상자료 제공과 농림 분야에서의 요구를 충족시키기 위하여 LAPS를 이용하여 경기도 지역을 100m 해상도로 분석하였다. 구축된 시스템은 수치예보과에서 생산되는 6시간 간격 예측자료를 초기추정치로 사용하고, 각 관측자료를 동화하여 지표 온도와 습도 바람을 분석한다. 기존 분석시스템의 기상관측자료의 수집 방식을 개선하여 자료 수집에 소요되는 시간을 성공적으로 단축시킴으로써 약 20분 내에 기온, 상대습도, 풍향, 풍속에 대한 고해상도 분석결과 제공이 가능하게 되었다. 그러나 앞으로 LAPS 분석결과를 이용하여 관측이 가능한 지역 이외에 어느 지역에서든 정확한 농업기상정보를 산출할 수 있게 하려면 다양한 기상자료의 활용과 지표이용도의 개선, 관측지점의 영향반경을 최적화 시키는 과정들이 추가로 연구되어야 할 것이다. 현재 구축된 시스템의 분석결과 정확도는 떨어지지만 LAPS의 내부 알고리즘에 대한 미세한 조정으로 향상이 가능하므로 농업기상요소 생성을 위한 최적화 작업들을 수행한다면 정확도 향상을 꾀할 수 있을 것이다. 또한 다양한 기상요소에 대한 분석이 가능하기 때문에 특별한 기상요소들을 필요로 하는 농림 분야의 요구를 충족 시킬 수 있도록 분석요소의 확장이 가능 할 것이다.

• Composites Research
• /
• 제29권5호
• /
• pp.276-281
• /
• 2016

본 연구에서는 돌침대용 석재/목재 복합재의 열적특성 및 접착특성 개선에 대한 연구를 진행하였다. 기초 물성을 체크하기 위해 인장실험을 진행하였고 석재 및 목재의 실시간 온도측정을 진행하였다. 석재/목재 복합재의 가열부위에 따른 열적 특성을 알아보기 위해 석재를 위로 두었을 때와 목재를 위로 두었을 때 두 가지 방법으로 가열을 실시하였다. 에폭시 접착제에 CNT를 넣음으로써, 열적 및 접착특성의 변화를 알아보기 위하여 실시간 온도측정과 랩 전단 실험을 실시하였다. 실험결과 목재를 위로 두었을 때 열적 특성이 좋은 것을 확인하였고 에폭시 접착제에 CNT를 넣음으로써 접착특성 및 열적특성이 개선됨을 볼 수 있었다.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.129-133
• /
• 2007

Focused Ion Beam(FIB) systems is a useful tool for the fabrication of micro-nano scale structures. In this study, the effects of FIB etching on the Au microstructure are systematically investigated. As the fabrication parameters, ion dose, dwell time and beam overlap ratio are studied. First, the increases of Ga ion dose makes the milling yield higher and the sidewall of milling profile steeper. Dwell time is found to have little effects on the milling profile due to the relatively large milling area of $1\times1{\mu}m^2$ used in this study. However, beam overlap significantly affects not only milling rate but also milling profile. As the beam overlap ratio changes from positive to negative, the development of regular cross-stripe patterns at the bottom with low milling rate is observed.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.219-221
• /
• 2006

In an attempt to optimize friction spot joining process of Al alloys for automobiles, Friction spot joining was used make lap feint on strips of AA5052-H32 and AA6022-T4 aluminium alloy. The effects of joining parameters such as tool rotating speed, plunging depth, joining time and kind of upper plate on the joints properties were investigated. An optimal tensile shear strength parameter of a tool rotating speed of 1000rpm, dwell time 2.5sec with upper plate 6022 can be found to make a good joint.

• 한국컴퓨터정보학회논문지
• /
• 제21권4호
• /
• pp.81-88
• /
• 2016

The optimal solution of quadratic assignment problem (QAP) cannot get done in polynomial time. This problem is called by NP-complete problem. Therefore the meta-heuristic techniques are applied to this problem to get the approximated solution within polynomial time. This paper proposes an algorithm for a random type QAP, in which the instance of two nodes are arbitrary. The proposed algorithm employs what is coined as a max flow-min distance rule by which the maximum flow node is assigned to the minimum distance node. When applied to the random type QAP, the proposed algorithm has been found to obtain optimal solutions superior to those of the genetic algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.956-959
• /
• 2001

In die and mould industry, major material such as cemented carbide is broadly used for increasing the life time and decreasing the cost. It is also required the development for the skills of wire-cut electrical discharge machining(WEDM), but the WEDMed surface was found to be worst due to the attached components of wire. Precision machining method like lapping is necessary for obtaining high quality surface. The lapping compound such as Al2O3 and SiC and cast iron lap can be used for lapping process. The components of Cu and Zn were found WEDMed surface of the specimen. As the result, the low quality of precision was obtained and the heat damage layer of the specimen was occurred. The value of surface hardness was deteriorated, and therefore finish process was required.