• Structural Engineering and Mechanics
• /
• v.56 no.5
• /
• pp.813-833
• /
• 2015

Spherical reticulated shells are widely applied in structural engineering due to their good bearing capability and attractive appearance. Parametric modeling of spherical reticulated shells is the basis of internal analysis and optimization design. In the present study, generation methods of nodes and the corresponding connection methods of rod elements are proposed. Modeling programs are compiled by adopting the ANSYS Parametric Design Language (APDL). A shape optimization method based on the two-stage algorithm is presented, and the corresponding optimization program is compiled in FORTRAN environment. Shape optimization is carried out based on the objective function of the minimum total steel consumption and the restriction condition of strength, stiffness, slenderness ratio, stability. The shape optimization of four typical Schwedler spherical reticulated shells is calculated with the span of 30 m~80 m and rise to span ratio of 1/7~1/2. Compared with the shape optimization results, the variation rules of total steel consumption along with the span and rise to span ratio are discussed. The results show that: (1) The left and right rod-Schwedler spherical reticulated shell is the most optimized and should be preferentially adopted in structural engineering. (2) The left diagonal rod-Schwedler spherical reticulated shell is second only to left and right rod regarding the mechanical behavior and optimized results. It can be applied to medium and small-span structures. (3) Double slash rod-Schwedler spherical reticulated shell is advantageous in mechanical behavior but with the largest total weight. Thus, this type can be used in large-span structures as far as possible. (4) The mechanical performance of no latitudinal rod-Schwedler spherical reticulated shell is the worst and with the second largest weight. Thus, this spherical reticulated shell should not be adopted generally in engineering.

• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.193-198
• /
• 2019

This study analyzed the changes of vowel formant, voice intensity, and fundamental frequency of vowels for 11 months using acoustochemical spectrogram analysis of women diagnosed with amyotrophic lateral sclerosis (ALS). The test word was a vowel /a, i, u/ and a diphthong /h + ja + da/, /h + wi + da/, and /h +ɰi+ da/. Speech data were collected through the word reading task presented on the monitor using 'Alvin' program, and the recording environment was set to 5,500 Hz for the nyquist frequency and 11,000 Hz for the sampling rate. The records were analyzed by using spectrograms to vowel formants, voice intensity, and fundamental frequency. As a result of analysis, the fundamental frequency and intensity of the ALS process were decreased and the formant slope of the diphthong was decreased rather than the formant change in the vowel. This result suggests that the vowel distortion of ALS due to disease progression is due to the decrease of tongue and jaw co morbidity.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.5
• /
• pp.652-664
• /
• 2022

The Kernohan-Woltman notch phenomenon (KWNP) refers to an intracranial lesion causing massive side-to-side mass effect which leads to compression of the contralateral cerebral peduncle against the free edge of the cerebellar tentorium. Diagnosis is based on "paradoxical" motor deficit ipsilateral to the lesion associated with radiologic evidence of damage to the contralateral cerebral peduncle. To date, there is scarce evidence regarding KWNP associated neuroimaging patterns and motor function prognostic factors. A systematic review was conducted on Medline database from inception to July 2021 looking for English-language articles concerning KWNP, in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The research yielded 45 articles for a total of 51 patients. The mean age was 40.7 years-old and the male/female sex ratio was 2/1. 63% of the patients (32/51) suffered from head trauma with a majority of acute subdural hematomas (57%, 29/51). 57% (29/51) of the patients were in the coma upon admission and 47% (24/51) presented pupil anomalies. KWNP presented the neuroimaging features of compression ischemic stroke located in the contralateral cerebral peduncle, with edema in the surrounding structures and sometimes compression stroke of the cerebral arteries passing nearby. 45% of the patients (23/51) presented a good motor functional outcome; nevertheless, no predisposing factor was identified. A Glasgow coma scale (GCS) of more than 3 showed a trend (p=0.1065) toward a better motor functional outcome. The KWNP is a regional compression syndrome oftentimes caused by sudden and massive uncal herniation and leading to contralateral cerebral peduncle ischemia. Even though patients suffering from KWNP usually present a good overall recovery, patients with a GCS of 3 may present a worse motor functional outcome. In order to better understand this syndrome, future studies will have to focus on more personalized criteria such as individual variation of tentorial notch width.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.3
• /
• pp.527-535
• /
• 2023

To develop experts capable of responding to cyber security incidents, numerous institutions have established cyber training facilities to cultivate security professionals equipped with effective defense strategies. However, these challenges such as limited resources, scenario-based content development, and cost constraints. To address these issues, this paper proposes a virtual infrastructure variation generation framework. It provides customized, diverse IT infrastructure environments for each organization, allowing cyber defense trainers to accumulate a wide range of experiences. By leveraging Infrastructure-as-Code (IaC) containers and employing Word2Vec, a natural language processing model, mutable code elements are extracted and trained, enabling the generation of new code and presenting novel container environments.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.11
• /
• pp.779-788
• /
• 2013

With a wide dissemination of smartphones, the number of native applications developed and sold freely by anyone is growing now. The application market activated by Apple's App Store is spreading more rapidly with Google's Google Play. But due to platform-dependent of native application's attribute, developers are programming at each platform. As a result, development cost is increasing compared to earnings. To solve a dependency problem, people focused on web application developed by web-based language. However, stores at each browser are requiring a web application to follow manifest format. And this causes browser-dependent problem. Those problems can be solved by installing a certain browser, but this can make an application useless on the other browser of a store. Dependency problem can narrow not only user's application variation, but also concentration on some specific store. OWS(Open Web Store) is a standard store that supports various web environments. It overcomes browser or platform dependency problems by interworking applications between stores. Also customers are able to choose a large number of applications. In this paper, related to OWS, I would like to suggest manifest standards and store's reference architecture. An interworking scenario is going to be proposed as well.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.11
• /
• pp.1423-1433
• /
• 2018

Recently, a permanent magnet synchronous motor of middle and small-capacity has high torque, high precision control and acceleration / deceleration characteristics. But existing control has several problems that include unpredictable disturbances and parameter changes in the high accuracy and rigidity control industry or nonlinear dynamic characteristics not considered in the driving part. In addition, in the drive method for the control of low-vibration and high-precision, the process of connecting the permanent magnet synchronous motor and the load may cause the response characteristic of the system to become very unstable, to cause vibration, and to overload the system. In order to solve these problems, various studies such as adaptive control, optimal control, robust control and artificial neural network have been actively conducted. In this paper, an incremental encoder of the permanent magnet synchronous motor is used to detect the position of the rotor. And the position of the detected rotor is used for low vibration and high precision position control. As the controller, we propose augmented state feedback control with a speed observer and first order deadbeat disturbance observer. The augmented state feedback controller performs control that the position of the rotor reaches the reference position quickly and precisely. The addition of the speed observer to this augmented state feedback controller compensates for the drop in speed response characteristics by using the previously calculated speed value for the control. The first order deadbeat disturbance observer performs control to reduce the vibration of the motor by compensating for the vibrating component or disturbance that the mechanism has. Since the deadbeat disturbance observer has a characteristic of being vulnerable to noise, it is supplemented by moving average filter method to reduce the influence of the noise. Thus, the new controller with the first order deadbeat disturbance observer can perform more robustness and precise the position control for the influence of large inertial load and natural frequency. The simulation stability and efficiency has been obtained through C language and Matlab Simulink. In addition, the experiment of actual 2.5[kW] permanent magnet synchronous motor was verified.

• The Korean Journal of Malacology
• /
• v.32 no.1
• /
• pp.55-62
• /
• 2016

In this study, an attempt has been made to analyze the morphology of Cephalopods distributed in Korea and collected samples from South-East Asian countries including Thailand, Indonesia, Vietnam, and China. A phylogenetic analysis was performed using the mitochondrial gene, Cytochrome c oxidase subunit I (COI) to understand the genetic divergences of the species and validate their origins. For achieving the objectives, samples were collected directly from Thailand Hat Yai, Songkhla, Indonesia Medan, Vietnam Ho Chi Minh, and Vung Tau in August 2015 and from China in September 2015. A total of 23 species of Cephalopods were identified falling under three orders, four familyies and nine genus. The species were distributed under Order: Octopoda (1 family, 3 genus, and 9 species), Order: Sepiolioda (1 family, 2 genus, and 8 species), and Order Teuthoidea (2 family, 4 genus, and 6 species). 23 species which is 1 family 3 genus 9 species in Octopoda, 1 family 2 genus 8 species in Sepiolioda, 2 family 4 genus 6 species in Teuthoidea. Phylogenetic analysis using COI gene was conducted for 18 species. For the remaining 5 species sequencing results showed severe variation and hence were not considered further. The COI phylogenetic analysis for the 18 species of Cephalopods were found consistent with the morphological identification. The excluded species will be subjected for a further detailed analysis.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.5
• /
• pp.239-246
• /
• 2017

In case of observing only wave height and period in the field, various wave characteristics are mainly calculated by wave by wave analysis method. In this paper, an wave by wave analysis program using MATLAB language is developed. It is possible to perform a function such as 1) correction for mean water level, 2) calculation for zero crossing time, 3) calculation for individual wave height, 4) time interval by using zero upcrossing and downcrossing method. The applicability of the developed program to the data of 0.2 second interval observed by using the WaveGuide Radar installed on HeMOSU-1 was examined. Tidal level variation removal and zero crossing time estimation were determined by linear or quadratic interpolation. It was judged that the Goda method was appropriate for calculating individual wave height, and the method proposed in this study seems to be improved through subsequent research. Due to the fineness of the sample, it can be seen that characteristics of representative waves are different from the results calculated by zero upcrossing and downcrossing method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.697-707
• /
• 2008

The grid-based KIneMatic wave STOrm Runoff Model (KIMSTORM) by Kim (1998) predicts the temporal variation and spatial distribution of overland flow, subsurface flow and stream flow in a watershed. The model programmed with C++ language on Unix operating system adopts single flowpath algorithm for water balance simulation of flow at each grid element. In this study, we attempted to improve the model by converting the code into FORTRAN 90 on MS Windows operating system and named as ModKIMSTORM. The improved functions are the addition of GAML (Green-Ampt & Mein-Larson) infiltration model, control of paddy runoff rate by flow depth and Manning's roughness coefficient, addition of baseflow layer, treatment of both spatial and point rainfall data, development of the pre- and post-processor, and development of automatic model evaluation function using five evaluation criteria (Pearson's coefficient of determination, Nash and Sutcliffe model efficiency, the deviation of runoff volume, relative error of the peak runoff rate, and absolute error of the time to peak runoff). The modified model adopts Shell Sort algorithm to enhance the computational performance. Input data formats are accepted as raster and MS Excel, and model outputs viz. soil moisture, discharge, flow depth and velocity are generated as BSQ, ASCII grid, binary grid and raster formats.

• Progress in Medical Physics
• /
• v.10 no.2
• /
• pp.63-71
• /
• 1999

For the purpose of utilization in 3-D conformal radiotherapy and whole body radiosurgery, the Whole Body 3-Dimensional Topographic Radiation Therapy System has been developed. Whole body frame was constructed in order to be installed on the couch. Radiopaque catheters were engraved on it for the dedicated coordinate system and a MeV-Green immobilizer was used for the patient setup by the help of side panels and plastic rods. By designing and constructing the whole body frame in this way, geometrical limitation to the gantry rotation in 3-D conformal radiotherapy could be minimized and problem which radiation transmission may be altered in particular incident angles was solved. By analyzing CT images containing information of patient setup with respect to the whole body frame, localization and coordination of the target is performed so that patient setup error may be eliminated between simulation and treatment. For the verification of setup, the change of patient positioning is detected and adjusted in order to minimize the setup error by means of comparison of the body outlines using 3 CCTV cameras. To enhance efficiency of treatment procedure, this work can be done in real time by watching the change of patient setup through the monitor. The method of image subtraction in IDL (Interactive Data Language) was used to visualize the change of patient setup. Rotating X-ray system was constructed for detecting target movement due to internal organ motion. Landmark screws were implanted either on the bones around target or inside target, and variation of target location with respect to markers may be visualized in order to minimize internal setup error through the anterior and the lateral image information taken from rotating X-ray system. For CT simulation, simulation software was developed using IDL on GUI(Graphic User Interface) basis for PC and includes functions of graphic handling, editing and data acquisition of images of internal organs as well as target for the preparation of treatment planning.