• Journal of the Korean Applied Science and Technology
• /
• v.19 no.1
• /
• pp.49-55
• /
• 2002

We carried out this experiment to observe electrochemical properties for LB films of phospholipid(Dilauroyl-L-${\alpha}$-Phosphayidylcholine) and 4-octyl-4'-(5-carboxypentamethylene-oxy)azobenzene mixture by the cyclic voltammetry. LB films of 8A5H and 8A5H-DLPC(1:1, 2:1) were deposited by using the Langmuir-Blodgett method on the ITO glass. We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system, An Ag/AgCl reference elect rode, a platinum wire counter electrode and LB film-coated ITO working electrode measured in 0.1, 0.5, and 1.0 mol/L $NaClO_{4}$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate were 50, 100, 150 and 200 mV/s. As a result, LB films of 8A5H 8A5H-DLPC appeared irreversible process caused by only the oxidation current from the cyclic voltammogram.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.7
• /
• pp.889-894
• /
• 1995

The structural changes of the merocyanine monolayer LB (Langmuir Blodgett) films were investigated. These changes were compared with the typical changes of the molecular structures of merocyanine solutions. The structural changes of quinoid/benzenoid were attained by exposure to atmosphere gases (HCl gas, N $H_{3}$ gas). The photoisomerization was not observed for the monolayer LB film due to their state of $M_{trans}$. But we could obtain the cis/trans photoisomerization characteristics reversibly, after the films were changed to M $H^{+}$$_{trans}$ structure by exposure to HCl gas. We also found that the cis/trans photoisomerization of the LB monolayer films show the memory characteristics.s.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.111-114
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have been attracted lots of interests in large-area light-emitting display. In this stuffy, an emissive layer was fabricated using Langmuir-Blodgett(LB) technique in organic light-emitting (OLEDs). This emissive organic material was synthesized and named PECCP[poly(3.6-N-2-ethylhexyl carbazolyl cyanoterephthalidene)] which has a strong electron donor group and an electron acceptor group in main chain repeated unit. This material has good solubility in common organic solvents such as chloroform. THF, etc, and has a good stability in air. The Langmuir-Blodgett(LB) technique has the advantage of precise control of the thickness down to the molecular scale, In particular, by varying the film thickness it is possible to investigate the metal/polymer interface. Optimum conditions for the LB film deposition are usually determined by investigating a relationship between a surface pressure $\pi$ and an effective are A occupied by one molecule on the subphase. The LB films were deposited on an indium-tin-oxide(ITO) glass at a surface pressure of 10 mN/m and dipping speed of 12 mm/min after spreading PECCP solution on distilled water surphase at room temperature, Cell structure was ITO/PECCP LB film/Alq$_3$/Al. We considered PECCP as a hole -transport layer inserted between the emissive layer and ITO. We also used Alq$_3$ as an emissive layer and an electron transport layer. We measured current-voltage(I-V) characteristics, UV/visible absorption, PL spectrum and EL spectrum of the OLEDs.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.1
• /
• pp.29-35
• /
• 2000

In this study, ultra-thin films of (N-docosyl quinolinium)-TCNQ(1:2) complex were prepared on the hydrophilic substrate by Langmuir-Blodgett(LB) technique. The characteristics of ${\pi}-A$ isotherms were studied to find optimum conditions of deposition by varying temperature of subphase, compression speed of barrier and amount of spreading solution. Using UV-vis spectra, capacitance and thickness, deposition of LB films was confirmed together with the thickness of the naturally oxidized aluminum film inside a device and dielectric constant of (N-docosyl quinolinium)-TCNQ(1:2) complex. The dielectric constant of LB film was about $4.59{\sim}5.58$. The electrical properties of (N-docosyl quinolinium)-TCNQ(1:2) complex were investigated at room temperature. The conductivity of this film measured by the direction of either vertical or horizontal axis was found to have a quite different value.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.213-218
• /
• 2011

Displacement current measuring technique has been applied on the study of polyamic acid monolayer containing p-nitroazobenzene. The displacement current was generated from monolayer on the water surface by monolayer compression and expansion. Maxwell displacement current(MDC) was generated when the area per molecule was about $200{\AA}^2$ and $70{\AA}^2$. Maxwell displacement currents were investigated in connection with monolayer compression cycles. It was found that the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. The monolayer surface morphology of the LB film have been measured by Atomic Force Microscope(AFM). As a result, we confirmed that the microscopic properties of LB film by AFM showed the good orientation of monolayer molecules and the thickness of monolayer was 3.5-4.1nm.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.1
• /
• pp.89-93
• /
• 1997

In this research, ultra-thin films of organic charge transfer complex were deposited on to ordinary microscope slide-glass subtrates with a Langmuir-Blodgett technique. ${\pi}$-A isotherm characteristics of these complex were studied in order to find optimum conditions of deposition by varying temperature of subphase, compression speed, and spreading amount. Transfer ratio of these films were studied during the process of deposition. The UV-visible absorbance spectra of LB films were measured to find state of deposition by varing layer number. The observed optimum conditions of surface, pressure, spreading amount, and dipping speed for depositing LB films(Y-type) were 38m/Nm, $150{\mu}l$ and 5mm/min, respectively. Since the tansfer ratio is close to 100%, the monolayer on the subphase seems to be well transferred to the solid substrate. The thickness of the film was well-controlled as the UV-vis absorbance of films were changed linear according to the number of layers.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.359-366
• /
• 2014

We investigated an electrochemical properties for Langmuir-Blodgett (LB) films of saturated fatty acid and phospholipid(L-${\alpha}$-dimyristoylphosphatidyl choline, DMPC) mixture. LB films of saturated fatty acid and DMPC monolayer were deposited by the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) in $NaClO_4$ solution. As a result, monolayer LB films of saturated fatty acid and phospholipid mixture was appeared on irreversible process caused by the oxidation current from the cyclic voltammogram. Diffusion coefficient (D) of saturated fatty acid and DMPC mixture(molar ratio 1:1, C12, C14, C16, C18) was calculated $1.2{\times}10^{-3}$, $2.1{\times}10^{-3}$, $1.4{\times}10^{-4}$ and $1.1{\times}10^{-3}cm^2/s$ in 0.05 N $NaClO_4$ solution, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.4
• /
• pp.315-322
• /
• 2005

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with 4-octyl-4'-(5-carboxylpentamethyleneoxy)azobenzene (denoted as 8A5H) and $phospholipid(L-{\alpha}-dimyristoylphosphatidylcholine$, denoted as DMPC). LB films of 8A5H monolayer and 8A5H-DMPC were deposited by using the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured by using cyclic voltammetry with a three_electrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0mol/L) of $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350mV, continuously oxidized to 1650mV and measured to the initial point. The scan rates were 50, 100, 150 and 200mV/s, respectively. As a result, LB films of 8A5H monolayer appeared irreversible process caused by only the oxidation current from the cyclic voltammogram and LB films of 8A5H-DMPC mixture were found to be caused by a reversible oxidation-reduction process.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.202-207
• /
• 2010

We investigated the electrochemical properties for Langmuir-Blodgett(LB) films mixed with l-bromotetradecane(Cl4), l-bromohexadecane(Cl6), and l-bromooctadecane(Cl8). The alkyl bromides mixture was deposited by using the Langmuir-Blodgett method on the ITO glass. The electrochemical properties measured by using cyclic voltammetry with a three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) at various concentrations(0.5, 1.0, 1.5 and 2.0 N) of $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350 m V, continuously oxidized to 1650 mV. The scan rate was 100 mV/s. As a result, LB films of Cl4, Cl6, and Cl8 mixture monolayers appeared irreversible process caused by only the oxidation current from the cyclic voltammogram. The diffusivity(D) effect of LB films decreased with increasing of alkyl bromides amount.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.177-181
• /
• 2003

Ultra-thin films of amphiphillic squarylium dye were prepared on the hydrophillic substrate by Langmuir-Blodgett(LB) technique. In this study, the photoelectric properties of a amphiphillic squarylium dye LB film was investigated. The visible light(${\lambda}$ = 684nm ) of xenon lamp was illuminated on the amphiphillic squarylium dye LB films and light absorptivity and photoconductivity were observed. The photoconductivity was nearly constant regardless of nominal layer number. The photoelectric properties of the amphiphillic squarylium dye LB films with bottom electrode showed better than that top electrode.