• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1090-1093
• /
• 2003

최근에 각광을 받고 있는 전기 발광 소자를 Langmuir-Blodgett(LB)법을 이용하여 제작하였다. 사용 시료는 본 연구팀에서 합성을 하였으며, 시료는 PECCP[poly(3,6-N-2-ethylhexyl carbazolyl cyanoterephthalidene)]이며, 이 물질은 반복되는 주쇄에서 강한 전자 주게 그룹과 강한 전자 받게 그룹을 가지고 있다. PECCP 발광층을 제작하는데는 Langmuir-Blodgett(LB)법을 사용하였으며, 누적 층수에 의해 금속/고분자 계면의 특성을 조사하였다. 소자의 구조는 ITO/PECCP LB/Al과 ITO/PECCP LB/$Alq_3$/Al이며, ITO와 $Alq_3$ 사이에 발광층으로써 PECCP LB막을 도입하였다. 여기서 $Alq_3$는 전자 전달 층으로 사용되었다. PECCP LB막의 UV/visible 흡수 피크는 약 410mm에서, PL 피크는 약 536mm에서, 그리고 EL 피크도 역시 약 536nm에서 관찰되었다. 또한 $Alq_3$를 도입한 구조에서의 EL 피크 측정 결과 다양한 발광피크가 관측되었으며, Fowler-Nordheim 분석법을 이용하여 금속의 유기 막에 대한 일함수 값을 계산하였으며, 금속의 유기 막에 대한 일함수 값은 $0.18{\sim}0.26eV$이 계산되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1843-1845
• /
• 1999

We have investigated the dielectric characteristics of palmitic acid(PA), stearic acid (SA) and arachidic acid(AA) Langmuir-Blodgett(LB) films because these fatty acid systems have a same hydrophilic group and a different hydrophobic one (alkyl chain length). In this work. fatty acid systems were used as LB films and the status of the deposited films was confirmed by evaluating the transfer ratio. the UV absorption and the capacitance. Also, the dielectric characteristics such as the frequency-capacitance characteristics and the dielectric dispersion and absorption characteristics of PA, SA and AA through-plane were measured. The relative dielectric constants of PA, SA and AA LB films were about $2.6\sim4.6$, $2.4\sim4.1$ and $2.2\sim3.8$, respectively. That is, the relative dielectric constants were decreased in proportion to the chain length of methylene group. And, the dielectric dispersion and absorption of each fatty acid LB films have arisen from spontaneous polarization of dipole polarization in the range of $10^4\sim10^5[Hz]$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.60.2-60.2
• /
• 2010

A $TiO_2$ films in dye-sensitized solar cells was fabricated using $TiO_2$ colloidal sol prepared from titanium iso-propoxide used as a starting material by applying the sol-gel method. It was characterized by particle size analyzer, XRD, FE-SEM, and BET analysis. The adsorption isotherms of dye molecule on $TiO_2$ films were obtained at three different temperatures (30, 45, $60^{\circ}C$) and at three different pH (3, 5, 7). The adsorption kinetics of dye molecule on $TiO_2$ films were obtained at three different temperatures (30, 45, $60^{\circ}C$. The adsorption experimental data were correlated with Langmuir isotherm model and pseudo-second-order model. Also the isosteric enthalpies of dye adsorption were calculated by the Clausius-Clapeyron equation. In addition, the adsorption energy distribution functions which describe heterogeneous characteristics of nanocrystalline $TiO_2$ film surface were calculated by using the generalized nonlinear regularization method. We found that efficient adsorption of N719 dye from aqueous solution onto $TiO_2$ films can be successfully achieved by dye adsorption conditions and morphology of $TiO_2$ films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.219-221
• /
• 1994

Oil-soluble poly(p-phenylene(1-methoxyethylene)), as a precursor of poly(p-phenylenevinylene) (PPV), was synthesized add identified with NMR and FT-IR spectroscopy. The PPV films were prepared by PPV precursor films with a thermal treatment at $250^{\circ}C$ under vacuum, where the PPV precursor films wets formed on various substrates by using Langmuir-Blodgett(LB) method. The characterization of these films was carried out by FT-IR spectroscopy, UV-VIS absorption spectroscopym, and photoluminescence (PL). Atomic Force Microscopy (AFM) has been used to investigate He surface morphology of PPV films.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.953-959
• /
• 2006

Langmuir-Blodgett(LB)layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film. The structure of manufactured device is Au/arachidic acid/Al, the number of accumulated layers are $9{\sim}21$. Also, we then examined of the Metal-Insulator-Metal(MIM) device by means of I-V. The I-V characteristics of the device are measured from -3 to +3 V. The insulation property of a thin film is better as the distance between electrodes is larger.

• 한국응용과학기술학회지
• /
• 제22권3호
• /
• pp.228-233
• /
• 2005

Langmuir-Blodgett(LB) technique can speak the best candidate of the future molecular electronic devices. But, precursor as molecular ultrathin film devices require the bulk property that are influenced by the molecular orientation. So, this device is one of current interest in molecular electronic device development of new materials. In this study, quantitative evaluation of molecular orientation in LB films of polyamic acid alkylamine salt was performed analysis experiment comparing the absorption or transmission intensity of the FT-IR spectrometer and reflection or absorption spectra with UV-visible absorption spectra. It could find that the polar angle(${\theta}$) of the dipole moment appears in about $68^{\circ}$ and the tilting angle of the alkyl chain is about $11.5^{\circ}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.113-117
• /
• 1995

The mechanism of the displacement current generation for stimulation transmit observed in the present displacement current measurement and theoretically analysed. The orientational change of molecules in monolayers was discussed on the basis of the Maxwell-displacement-current obtained. Maxwell displacement current was generated from monolayers on a water surface by monolayerr compression, and it measuring technique has been applied to the study of monolayers of Dipalmitoylphosphatidyl choline (L-${\alpha}$-DPPC). Finally, We measured that differential thermal analysis(DTA) of sample. Displacement current was generated when the area per molecule about 180${\AA}$$^2$in low pressure, and it was generated when the area per molecule about 110${\AA}$$^2$in high pressure. A result of DTA was showed that temperature at 124.6$^{\circ}C$.

• Tribology and Lubricants
• /
• 제19권6호
• /
• pp.329-334
• /
• 2003

The antiwear properties of amphiphilic monolayers and composite multilayer on silicon surface were investigated using micro­tribometer and Auger Electron Spectroscopy. Langmuir­Blodgett (LB) monolayers from behenic acid, 2,4­heneicosanedione(HD) and its lopper complex((HD)$_2$Cu) were fabricated on silicon surface and the composite multilayer of 5­bilayer of (HD)$_2$Cu was fabricated on the surface of octadecyltrichlorosilane (OTS) self­assembled monolayer (SAM). We observed that LB monolayers and the composite multilayer exhibited a steady and excellent friction response when compared with the OTS SAM. These LB mono and multilayer also showed much higher wear­resistance than the OTS SAM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.211-214
• /
• 2003

The tribological properties of amphiphilic monolayers and composite multilayer on silicon surface were investigated using micro-tribometer and Auger Electron Spectroscopy. Langmuir-Blodgett (LB) monolayers from behenic acid. 2.4-heneicosanedione(HD) and its copper complex((HD)$_2$Cu) were fabricated on silicon surface and the composite multilayer of 5-bilayer of (HD)$_2$Cu was fabricated on the surface of octadecyltrichlorsilane (OTS) self-assembled monolayer(SAM). We observed that LB monolayers and the composite multilayer exhibited a steady and excellent friction response when compared with the OTS SAM. These LB mono and multilayer also showed much higher wear-resistance than the OTS SAM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.55-58
• /
• 1992

It was attempted to investigate the reaction of LB biological membrane in the gas surrounding by the use of LB method. The performance of the experiment was based on the idea that the adhesion of gas molecular on the surface of LB membrane, which induces the change of electrical properties, may make it possible to develop various sensor system modified from the sensor organs. The experimental results showed that for the acetone gas, the frequency changes in the proportional to the concentration of the gas. The reappearance of the gas reaction vs. frequency change was also able to be obtained properly.