• Environmental Engineering Research
• /
• 제18권3호
• /
• pp.163-168
• /
• 2013

In this study, an innovative media, iron mixed ceramic pellet (IMCP) has been developed for arsenic (As) removal from groundwater. A porous, solid-phase IMCP (2-3 mm) was manufactured by combining clay soil, rice bran, and Fe(0) powder at $600^{\circ}C$. Both the As(III) and As(V) adsorption characteristics of IMCP were studied in several batch experiments. Structural analysis of the IMCP was conducted using X-ray absorption fine structure (XAFS) analysis to understand the mechanism of As removal. The adsorption of As was found to be dependent on pH, and exhibited strong adsorption of both As(III) and As(V) at pH 5-7. The adsorption process was described to follow a pseudo-second-order reaction, and the adsorption rate of As(V) was greater than that of As(III). The adsorption data were fit well with both Freundlich and Langmuir isotherm models. The maximum adsorption capacities of As(III) and As(V) from the Langmuir isotherm were found to be 4.0 and 4.5 mg/g, respectively. Phosphorus in the water had an adverse effect on both As(III) and As(V) adsorption. Scanning electron microscopy results revealed that iron(III) oxides/hydroxides are aggregated on the surface of IMCP. XAFS analysis showed a partial oxidation of As(III) and adsorption of As(V) onto the iron oxide in the IMCP.

• 한국환경과학회지
• /
• 제23권12호
• /
• pp.1987-1998
• /
• 2014

Zeolite was synthesized from power station waste, coal fly ash, as an alternative low-cost adsorbent and investigated for the removal of Sr(II) and Cs(I) ions from single- and binary metal aqueous solutions. In order to investigate the adsorption characteristics, the effects of various operating parameters such as initial concentration of metal ions, contact time, and pH of the solutions were studied in a batch adsorption technique. The Langmuir model better fitted the adsorption isotherm data than the Freundlich model. The pseudo second-order model was found more applicable to describe the kinetics of system. The adsorption capacities of Sr(II) and Cs(I) ions obtained from the Langmuir model were 1.7848 mmol/g and 0.7640 mmol/g, respectively. Although the adsorption capacities of individual Sr(II) and Cs(I) ions was less in the binary-system, the sum of the total adsorption capacity (2.3572 mmol/g) of both ions in the binary-system was higher than the adsorption capacity of individual ion in the single-system. Comparing the homogeneous film diffusion model with the homogeneous particle diffusion model, the adsorption was mainly controlled by the particle diffusion process.

• 전기화학회지
• /
• 제16권4호
• /
• pp.211-216
• /
• 2013

At Pt(111), Pt(100), Pt, and Rh interfaces, the Frumkin adsorption isotherm of underpotentially deposited hydrogen (UPD H) and related electrode kinetic data are determined using the standard Gibbs energy of adsorption. The Temkin adsorption isotherm of UPD H correlating with the Frumkin adsorption isotherm of UPD H is readily determined using the correlation constants between the Temkin and Frumkin or Langmuir adsorption isotherms. At the Pt(111), Pt(100), Pt, and Rh interfaces, the lateral repulsive interaction between the UPD H species is interpreted using the interaction parameter for the Frumkin adsorption isotherm. The lateral repulsive interaction between the UPD H species at the Pt(111), Pt(100), Pt, and Rh interfaces is significantly different from the lateral attractive interaction between the overpotentially deposited hydrogen (OPD H) species at Pt, Ir, and Pt-Ir alloy interfaces.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.691-698
• /
• 2016

This study was carried out to investigate the characterization of iron oxide nanotubes (INTs) by anodization method and applied adsorption isotherms and kinetic models for phosphate adsorption. SEM analysis was conducted to examine the INTs surface formation. Further XRD and XPS analysis were performed to observe the crystal structure of INTs before and after phosphate adsorption. AFM analysis was conducted to determine of Fe foil surface before and after anodization. Phosphate stock solution for adsorption experiment was prepared by $KH_2PO_4$. The batch experiment was conducted using 20 ml phosphate stock solution and $40cm^3$ of INTs in 50 ml conical tube. Adsorption isotherms were applied Langmuir and Freundlich models for adsorption equilibrium test of INTs. Pseudo first order and pseudo second order models were applied for interpretation of adsorption rate by reaction time. The determination coefficient ($R^2$) values of Langmuir and Freundlich models were 0.9157 and 0.8876 respectively.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2198-2206
• /
• 2018

We addressed the development of a novel, low-cost, and high-efficient material from hybrid materials, known as microcapsules. Microcapsules are a composite adsorbent made of a mixture of tannin, sericite and chitosan. The FT-IR analysis showed that the microcapsules contain hydroxyl, carboxyl, carbonyl, and amino groups, which play an important role in the adsorption of heavy metals. The microcapsules were able to remove 99% of Pb(II) in 30 min, and obtained a removal efficiency of more than (13-50)%, compared with the single adsorbents of tannin, chitosan, and sericite. In adsorption kinetic analysis, pseudo-second-order adsorption was more suitable than pseudo-first-order adsorption, and chemical adsorption did not limit the adsorption rate of Pb(II) ion. In isothermal adsorption, Langmuir adsorption was more suitable than Freundlich adsorption, and the maximum Langmuir adsorption capacity was 167.82 (mg/g). Furthermore, desorption and reusability studies, as well as the applicability of the material for wastewater treatment, demonstrated that microcapsules offer a promising hybrid material for the efficient removal of significant water pollutants, i.e., Pb(II) from aqueous solutions.

• 전기화학회지
• /
• 제10권2호
• /
• pp.132-140
• /
• 2007

백금족/수용액 계면에서 Langmuir, Frumkin, Temkin 흡착등온식(${\theta}\;vs.\;E$)을 결정하기 위해 최적중간주파수 일 때 위상이동($0^{\circ}{\leq}-{\varphi}{\leq}90^{\circ}$) 거동($-{\varphi}\;vs.\;E$)과 표면피복율($1{\geq}{\theta}{\geq}0$) 거동(${\theta}\;vs.\;E$) 사이의 선형 관계식 연구에 관한 위상이동 방법 및 상관계수를 제안하고 증명하였다. Ir/0.1 M KOH수용액 계면에서 음극 $H_2$ 발생 반응에 관한 수소의 Langmuir 및 Temkin 흡착등온식(${\theta}\;vs.\;E$), 평형상수(Langmuir 흡착등온식: $K=3.3{\times}10^{-4}mol^{-1}$, Temkin 흡착등온식: $K=3.3{\times}10^{-3}{\exp}(-4.6{\theta})\;mol^{-1}$), 상호작용 파라미터(Temkin 흡착등온식: g=4.6), 표준자유에너지($K=3.3{\times}10^{-4}mol^{-1}$ 일 때 ${\Delta}G_{ads}^0=19.9kJ\;mol^{-1},\;K=3.3{\times}10^{-3}{\exp}(-4.6{\theta})\;mol^{-1}$ 및 $0.2<{\theta}<0.8$일 때 $16.5<{\Delta}G_{\theta}^0<23.3kJ\;mol^{-1}$)를 결정한다. 수소 흡착부위의 비균일 및 측 방향 상호작용 효과는 무시할 수 있다. ${\theta}$의 중간값 즉, $0.2<{\theta}<0.8$일 때 Langmuir 또는 Frumkin 흡착등온식과 상관관계에 있는 Temkin 흡착등온식은 상관계수를 이용하여 쉽게 결정할 수 있다. 위상이동 방법 및 상관계수는 흡착동온식(${\theta}\;vs.\;E$) 및 연관된 전극속도론과 열역학 파라미터(K, g, ${\Delta}G_{ads}^0, {\Delta}G_{\theta}^0$)를 결정하기 위한 정확하고 확실한 기술 및 방법이다.

• Carbon letters
• /
• 제23권
• /
• pp.30-37
• /
• 2017

Dyes are widely used in various industries including textile, cosmetic, paper, plastics, rubber, and coating, and their discharge into waterways causes serious environmental and health problems. Four different carbon nanostructures, graphene oxide, oxidized multi-walled carbon nanotubes, activated carbon and multi-walled carbon nanotubes, were used as adsorbents for the removal of Nile Blue A (NBA) dye from aqueous solution. The four carbon nanostructures were characterized by scanning electron microscope and X-ray diffractometer. The effects of various parameters were investigated. Kinetic adsorption data were analyzed using the first-order model and the pseudo-second-order model. The regression results showed that the adsorption kinetics were more accurately represented by the pseudo-second-order model. The equilibrium data for the aqueous solutions were fitted to Langmuir and Freundlich isotherms, and the equilibrium adsorption of NBA was best described by the Langmuir isotherm model. This is the first research on the removal of dye using four carbon nanostructures adsorbents.

• Advances in environmental research
• /
• 제5권4호
• /
• pp.225-235
• /
• 2016

Synthesized hydroxyapatite (Hyd) and Fe-hydroxyapatite (Fe-Hyd) composite were used for the removal of Methylene Blue (MB) from aqueous solutions in this study. The effect of adsorbent amount, pH and initial MB concentration were carried out to investigate in the aqueous solution. The kinetic study shows that the MB adsorption process with Hyd or Fe-Hyd follow pseudo-second order kinetic model. Experimental results are well fitted to the Langmuir isotherm model. The maximum adsorption capacities of Hyd and Fe-Hyd were obtained as 2.90 mg/g and 5.64 mg/g for MB according to Langmuir Isotherm models, respectively. Fe-Hyd composite increased the adsorption capacity of Hyd by 1.95 times that Hyd. It is concluded that Fe-Hyd composite is promising and economical adsorbent for MB removal in the aqueous solution.

• Environmental Engineering Research
• /
• 제10권2호
• /
• pp.45-53
• /
• 2005

Metal oxide particles with mole ratio of aluminum: titanium of 1:1 were synthesized by a sol-gel method. Langmuir (a) and Freundlich (b) adsorption isotherms of dissolved lead [Pb(Ⅱ)] ion on the metal oxide particles containing aluminum and titanium were determined as follows, respectively,(a) , (b) at pH 6where, correlation coefficients (R2) of Langmuir and Freundlich adsorption isotherms were 0.95 and 0.96, respectively.The overall adsorption rate of Pb(Ⅱ) on the metal oxide particles containing aluminum and titanium was determined by a differential bed reactor. The overall adsorption rate at pH 6 was as a following equation.at pH 6

• 한국물환경학회지
• /
• 제27권2호
• /
• pp.141-146
• /
• 2011

Loess, a natural clay, was evaluated as an adsorbent for the decolorization of Acid Orange II, an azo and reactive dye, from aqueous solution. Adsorption studies were performed at $30^{\circ}C$ and the effect of reaction time, loess dosage, initial concentration, loess particle size, pH, agitation rate were investigated to determine the optimum operation conditions. The removal efficiencies of color were measured to evaluate the effectiveness of loess. From this study, it was found that optimal reaction time was 10 min. Color removal efficiencies of Acid Orange II were increased as higher loess dosage, initial concentration and agitation rate. However, color removal efficiencies decreased when pH is high and loess particle becomes large. Adsorption of Acid Orange II fitted to the pseudo-second-order rate kinetics more than first-order rate kinetics. Langmuir and Freundlich adsorption isotherm constants and correlation coefficients were calculated and compared. It was concluded that the adsorption data of Acid Orange II onto loess fitted to the Freundlich model more than Langmuir model.