• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.101.5-101
• /
• 2002

A vehicle simulator is made here to simulate the lateral control of vehicles. Dead-reckoning sensors which consist of gyroscopes and accelerometers are utilized for the positioning of it. A significant side-slip occurs when the developed vehicle is drove autonomously. To cope with the side-slip, the vehicle is steered to follow the reference yaw rate which is generated by the relationship between the target point and the position of vehicle. The experimental results show the good performances of lane tracking and the passenger comfort.

• 천문학회지
• /
• 제31권2호
• /
• pp.141-160
• /
• 1998

We have conducted BV RI CCD surface photometry of three spiral galaxies ESO 598-G009, NGC 1515 and NGC 7456. In order to understand the morphological properties and luminosity distribution characteristics for each galaxy, we derived isophotal map, position angle profile, ellipticity profile, luminosity profile, color profile and color contour map. ESO 598-G009, which has a bright bulge component and a ring, shows a trace of gravitational interaction. NGC 1515 is a spiral galaxy with a bar and dust lane. NGC 7456 shows typical characteristics of a late type spiral galaxy.

• 자동차안전학회지
• /
• 제14권1호
• /
• pp.20-25
• /
• 2022

This paper presents a development of simulation environment for validation of autonomous driving (AD) algorithm based on Robot Operating System (ROS). ROS is one of the commonly-used frameworks utilized to control autonomous vehicles. For the evaluation of AD algorithm, a 3D autonomous driving simulator has been developed based on LGSVL. Two additional sensors are implemented in the simulation vehicle. First, Lidar sensor is mounted on the ego vehicle for real-time driving environment perception. Second, GPS sensor is equipped to estimate ego vehicle's position. With the vehicle sensor configuration in the simulation, the AD algorithm can predict the local environment and determine control commands with motion planning. The simulation environment has been evaluated with lane changing and keeping scenarios. The simulation results show that the proposed 3D simulator can successfully imitate the operation of a real-world vehicle.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.125-135
• /
• 2004

The validity of simulation has been well-established for decades in areas such as computer and communication system. Recently, the technique has become entrenched in specific areas such as transportation and traffic forecasting. Several methods have been proposed for investigating complex traffic flows. However, the dynamics of vehicles and their driver's characteristics, even though it is known that they are important factors for any traffic flow analysis, have never been considered sufficiently. In this paper, the traffic simulation using a multi-agent approach with considering vehicle dynamics is proposed. The multi-agent system is constructed with the traffic environment and the agents of vehicle and driver. The traffic environment consists of multi-lane roads, nodes, virtual lanes, and signals. To ensure the fast calculation, the agents are performed on the based of the rules to regulate their behaviors. The communication frameworks are proposed for the agents to share the information of vehicles' velocity and position. The model of a driver agent which controls a vehicle agent is described in the companion paper. The vehicle model contains the nonlinear subcomponents of engine, torque converter, automatic transmission, and wheels. The simulation has proceeded for an interrupted and uninterrupted flow model. The result has shown that the driver agent performs human-like behavior ranging from slow and careful to fast and aggressive driving behavior, and that the change of the traffic state is closely related with the distance and the signal delay between intersections. The system developed shows the effectiveness and the practical usefulness of the traffic simulation.

• 감성과학
• /
• 제6권3호
• /
• pp.1-11
• /
• 2003

본 연구는 운전 시뮬레이션 실험을 통해 운전 중 휴대 전화 사용이 운전 속도의 변화에 따라 운전 수행에 어떠한 영향을 미치는지를 알아보고자 할 목적으로 수행되었다. 본 연구에서는 일반적인 토로 상황을 모사하기 위해 직선 도로와 곡선 도로가 모두 제시되었으며, 운전자는 60, 80, 100및 120km/h의 주행 속도를 체계적으로 변화시킨 조건에서 운전하도록 하였다 이러한 운전 조건에 따라 운전자들은 핸즈-프리 장치 조건과 핸즈-헬드 장치조건 중 한 조건에 할당되었으며, 각각의 휴대전화 유형에서 전화를 사용하는 조건(실험 조건)과 사용하지 않는 조건(통제 조건)을 모두 수행하였다 이러한 조건에 대해 운전자들이 보인 차량의 종적 통제와 횡적 통제를 측정하여 운전 수행을 비교하였다. 본 연구의 결과를 요약하면 다음과 같다. (1) 전체적인 분석에서 전화를 사용하는 조건과 사용하지 않는 조건에서 운전 수행의 차이가 관찰되었고, (2) 전화 사용의 유형(즉, 핸즈-프리와 핸즈-헬드 조건) 사이에는 차이가 없었다. (3) 일반적으로, 운전 속도가 증가함에 따라 전화를 사용하면서 운전을 하는 조건에서 속도의 변산성과 차선 내 횡적 위치, 그리고 차간 거리의 변산성이 증가하였다. 이러한 결과들은 운전 중에 어떠한 유형의 휴대폰을 사용하는 것이 더 운전 수행에 손상을 주는지의 여부보다 단순히 전화를 사용하는 것 자체가 운전 수행을 손상시킬 수 있다는 것을 시사하며, 특히 운전 수행과 휴대폰 사용의 관계를 고려할 때 다른 운전 조건(예를 들면, 운전 속도)을 고려해야 한다는 것을 시사한다.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.107-122
• /
• 2015

PURPOSES : The use of virtual driving tests to determine actual road driving behavior is increasing. However, the results indicate a gap between real and virtual driving under same road conditions road based on ergonomic factors, such as anxiety and speed. In the future, the use of virtual driving tests is expected to increase. For this reason, the purpose of this study is to analyze the gap between real and virtual driving on same road conditions and to use a calibration formula to allow for higher reliability of virtual driving tests. METHODS : An intelligent driving recorder was used to capture real driving. A driving simulator was used to record virtual driving. Additionally, a virtual driving map was made with the UC-Win/Road software. We gathered data including geometric structure information, driving information, driver information, and road operation information for real driving and virtual driving on the same road conditions. In this study we investigated a range of gaps, driving speeds, and lateral positions, and introduced a calibration formula to the virtual record to achieve the same record as the real driving situation by applying the effects of the main causes of discrepancy between the two (driving speed and lateral position) using a linear regression model. RESULTS: In the virtual driving test, driving speed and lateral position were determined to be higher and bigger than in the real Driving test, respectively. Additionally, the virtual driving test reduces the concentration, anxiety, and reality when compared to the real driving test. The formula includes four variables to produce the calibration: tangent driving speed, curve driving speed, tangent lateral position, and curve lateral position. However, the tangent lateral position was excluded because it was not statistically significant. CONCLUSIONS: The results of analyzing the formula from MPB (mean prediction bias), MAD (mean absolute deviation) is after applying the formula to the virtual driving test, similar to the real driving test so that the formula works. Because this study was conducted on a national, two-way road, the road speed limit was 80 km/h, and the lane width was 3.0-3.5 m. It works in the same condition road restrictively.

• Journal of Biosystems Engineering
• /
• 제33권5호
• /
• pp.348-354
• /
• 2008

Egg grading is determined by exterior and interior quality. Among the evaluation methods for the egg quality, a candling method is common to identify eggs with cracked shells and interior defects. But this method is time-consuming and laborious. In addition, practically, it is challenging to detect hairline and micro cracks. In this study, an on-line inspection system based on acoustic resonance frequency analysis was developed to detect hairline cracks on eggshells. A roller conveyor was used to transfer eggs along one lane to the impact position where each of eggs rotated by the roller was excited with an impact device at four different locations on the eggshell equator. The impact device was consisted of a plastic hammer and a rotary solenoid. The acoustic response of the egg to the impact was measured with a small condenser microphone at the same position as the impact device was installed. Two acoustic parameters, correlation coefficient for normalized power spectra and standard deviation of peak resonant frequencies, were used to detect cracked eggs. Intact eggs showed relatively high correlations among the four normalized power spectra and low standard deviations of the four peak resonant frequencies. On the other hand, cracked eggs showed low correlations and high standard deviations as compared to the intact. This method allowed a crack detection rate of 97.6%.

• 제어로봇시스템학회논문지
• /
• 제5권5호
• /
• pp.568-576
• /
• 1999

Using a laser sheet beam projector combined with a CCD-Camera, an efficient technique to recognize complex surface of curvature and lane has been demonstrated for the purpose of mobile robot navigation. In general, obstacles of indoor environments in the field of SLIT-RAY plane are captured as segments of an elliptical arc and a line in the camera image. The robot has been capable of moving along around the obstacle in front of it, by recognizing the original shape of each segment with the differential coefficient by means of least squares method. In this technique, the imaged pixels of each segment, particularly elliptical arc, have been converted into a corresponding circular arc in the real-world coordinates so as to make more feasible the image processing for the position and radius measurement than conventional way based on direct elliptical are analyses. Advantages over direct elliptical cases include 1) higher measurement accuracy and shorter processing time because the circular arc process can reduce the shape-specifying parameters, 2) no complicated factor such as the tilt of elliptical arc axis in the image plane, which produces the capability to find column position and radiua regardless of the camera location . These are essentially required for a mobile robot application. This technique yields an accuracy less than 2cm for a 28.5cm radius column located in the range of 70-250cm distance from the robot. The accuracy obtained in this study is sufficient enough to navigate a cleaning robot which operates in indoor environments.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.402-408
• /
• 2021

기계 설계를 기반으로 제작한 자동차에 의한 사고 발생 시 차량 공학적인 분석은 심도 있게 조사하지 않고 조사자의 주관적인 경험 지식을 토대로 분석하는 경우가 있다. 본 연구는 실제 발생한 중앙선 침범 사고 자료를 토대로 캐드(CAD) 프로그램을 이용하여 현장 상황을 도면화하고, 도면화 한 자료를 시뮬레이션 프로그램(PC-Crash)에 적용하여 250번의 충돌 상황을 반복적으로 수행하여 최종 정지 위치 및 최종 정지 자세와 부합하는 충돌 속도, 진행 자세, 조향 작동 여부 및 제동 여부 등의 상관 관계를 분석했다. 충돌 속도가 낮을수록 이탈각의 영향을 크게 받지 않고 속도가 높은 차량의 속도에 영향을 크게 받고 충돌 이후에는 유효 충돌 속도와 같이 속도가 낮은 차량은 높아지고, 속도가 높은 차량은 낮아진다. 본 연구의 시뮬레이션 결과는 마이티가 중앙선을 넘은 자세로 오르막 좌커브 구간을 진행하다가 마주오던 포터를 인지하고 자기 진행 차로로 복귀하는 과정과 포터의 전면 좌측면이 충돌하여 포터가 우대각선 방향으로 밀려나 전면이 약 11시 방향을 향해 최종 정지하는 것을 규명하였다.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2005년도 추계학술대회 논문집
• /
• pp.190-200
• /
• 2005

In this paper, the image modelling of road's lane markings is established using view frustum(VF) modeling. This algorithm also involve the real time processing of the 3D position coordinate and the distance data from the camera to the points on the 3D world coordinate by the camera calibration. In order to reduce their measurement error, an useful algorithm for which analyze the geometric variations clue to traveling vehicle's fluctuation using VF model is proposed. In experiments, without correction, for instance, the $0.4^{\circ}$ of pitching rotation gives the error of $0.4^{\sim}0.6m$ at the distance of 10m, but the more far distance cause exponentially the more error. We confirmed that this algorithm can be reduced less than 0.1m of error at the same condition.