• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.113-120
• /
• 2014

In this paper, we examine Asymmetric Multi-Processing Environment to provide LDW service. Asymmetric Multi-Processing Environment consists of high-speed MCU to support rapid image processing and low-speed MCU for controlling with other ECU at the control domain. Also we designed rapid image process application and LDW application Software Component(SW-C) according to the development process rule of AUTOSAR. To communicate between two MCUs, timer based polling based IPC was designed. Also to communicate with other ECUs(Electronic Control Units), we designed CAN messages to provide alarm information and receiving CAN message to catch the Turn signal. We confirm the possibility of the various ADAS development using an Asymmetric Multi-Processing Environment and AUTOSAR platform. We also expect providing ISO 26262 functional safety.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.173-180
• /
• 2016

OBJECTIVES : Fixed roadside objects are a threat to drivers when their vehicles deviate from the road. Therefore, such roadside objects need to be suitably dealt with to decrease accidents. This study determines the factors affecting the severity of accidents because of fixed roadside objects. METHODS : This study analyzed the crash severity impact of fixed roadside objects by using ordered probit regression as the analysis methodology. In this research, data from 896 traffic accidents reported in the last three years were used. These accidents consisted of sole-car accidents, fixed roadside object accidents, and lane-departure accidents on the national highway of Korea. The accident severity was classified as light injury, severe injury, and death. The factors relating to the road and the driver were collected as independent variables. RESULTS : The result of the analysis showed that the variables of the crash severity impact are the collision location (left side), gender of the driver (female), alcohol use, collision facility (roadside trees, traffic signals, telephone poles), and type of road (rural segments). Additionally, the collision location (left side), gender of the driver (female), alcohol use, collision facility (street trees, traffic signals, telephone poles), and type of road (rural segments), in order of influence, were found to be the factors affecting the crash severity in accidents due to fixed roadside objects. CONCLUSIONS : An alternative solution is urgently required to reduce the crash severity in accidents due to fixed roadside objects. Such a solution can consider the appropriate places to install breakaway devices and energy-absorbing systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.636-645
• /
• 2015

In this paper, unusual harmonics noise problem of digital electronic products in mass production was introduced and a practical solution was proposed. Generally, 5th or higher harmonics noise level has been ignored in circuit designs because over 5th harmonics noise decreases by 40 (dB/decade). Through some measurements, it is confirmed that over 10th harmonics noise can propagate and radiate in case of a certain PCB or housing conditions. We propose a capacitively loaded micro-strip low pass filter for commercial products having spatial design constraints and measured the effectiveness. The proposed structure can solve both of the continual increment of harmonics noise level and the spatial design constraint of commercial products. We expect the proposed method be effectively used for various digital electronic products.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.1
• /
• pp.44-49
• /
• 2013

This paper presents a lateral collision risk index between an ego vehicle and a rear-side vehicle. The lateral collision risk is designed to represent a lateral collision risk and provide the appropriate threshold value of activation of the lateral collision management system such as the Blind Spot Detection(BSD). The lateral collision risk index is designed using the Time to Line Crossing(TLC) and the longitudinal collision index at the predicted TLC. TLC and the longitudinal collision index are calculated with the signals from the exterior sensor such as the radar equipped on the rear-side of a vehicle and a vision sensor which detects the distance and time to the lane departure. For the robust situation assessment, the perception of driving environment determining whether the road is straighten or curved should be determined. The relative motion estimation method has been proposed with the road information via the integrated estimator using the environment sensors and vehicle sensor. A lateral collision risk index was composed with the estimated relative motion considering the relative yaw angle. The performance of the proposed lateral collision risk index is investigated via computer simulations conducted using the vehicle dynamics software CARSIM and Matlab/Simulink.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.235-244
• /
• 2016

Automotive symbols are more widely needed for new, convenient driving devices in automobiles. Good automotive symbols should be detectable, identifiable at first glance, easily learned, recognizable, and produce quick responses after practice. In this paper, a methodology for developing and evaluating automotive symbols is suggested. It includes multiple tests, such as comprehension, perceptual quality, appropriateness, and integrated evaluation. 28 symbols were tested and evaluated by the suggested methodology for convenient driving systems, such as a lane departure warning system (LDWS), cruise control (CCS), and a collision warning system (CWS). Most of the KS R ISO 2575 symbols had higher scores of comprehension, perceptual quality, and appropriateness, but the sunroof and camera symbols had lower scores. Standard symbols with several new functions should be developed. This methodology could be useful for developing and evaluating automotive symbols.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.402-408
• /
• 2021

Vehicle engineering analysis in the event of an accident caused by a car built on mechanical design has not been investigated in-depth but relies on the subjective experience knowledge of the investigator. This study analyzed the correlation between the speed, progress, steering, and braking before impact, which is consistent with the final stop position, by drawing a site situation chart using the CAD (CAD) program and repeating 250 crashes using the PC-Crash program. The following situations were investigated: lower impact velocity; greater impact speed of the vehicle, which is not affected significantly by the departure angle; higher vehicle speed, such as the effective impact velocity, after the impact; higher vehicle speed; and lower vehicle speed. (Ed note: I am unsure what you are saying here. It appears contradictory and not a complete sentence. Please check the changes.)The simulation results of this study identified the process of returning to the magnetic progression lane after recognizing the opposite porter while Mighty was carried out on the uphill left-curve section in a position that crossed the center line, and the collision of the porter's front left side, pushing the porter in the right diagonal direction and making the front stop towards approximately 11 o'clock.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.65-70
• /
• 2023

In this paper, we propose an autonomous driving system using an end-to-end model to improve lane departure and misrecognition of traffic lights in a vision sensor-based system. End-to-end learning can be extended to a variety of environmental conditions. Driving data is collected using a model car based on a vision sensor. Using the collected data, it is composed of existing data and data with outlayers removed. A class was formed with camera image data as input data and speed and steering data as output data, and data learning was performed using an end-to-end model. The reliability of the trained model was verified. Apply the learned end-to-end model to the model car to predict the steering angle with image data. As a result of the learning of the model car, it can be seen that the model with the outlayer removed is improved than the existing model.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.209-221
• /
• 2009

Travel time estimation under given traffic conditions is important for providing drivers with travel time prediction information. But the present expressway travel time estimation process cannot calculate a reliable travel time. The objective of this study is to estimate the path travel time spent in a through lane between origin tollgates and destination tollgates on an expressway as a prerequisite result to offer reliable prediction information. Useful and abundant toll collection system (TCS) data were used. When estimating the path travel time, the path travel time is estimated combining the link travel time obtained through a preprocessing process. In the case of a lack of TCS data, the TCS travel time for previous intervals is referenced using the linear interpolation method after analyzing the increase pattern for the travel time. When the TCS data are absent over a long-term period, the dynamic travel time using the VDS time space diagram is estimated. The travel time estimated by the model proposed can be validated statistically when compared to the travel time obtained from vehicles traveling the path directly. The results show that the proposed model can be utilized for estimating a reliable travel time for a long-distance path in which there are a variaty of travel times from the same departure time, the intervals are large and the change in the representative travel time is irregular for a short period.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.14-26
• /
• 2019

For bus drivers' safe driving, a policy that analyzes the causes of the drivers' traffic accidents and then assists their safe driving is required. Therefore, the Ministry of Land, Infrastructure and Transport set up its plan to gradually expand the equipping of commercial vehicles with FCWS (Forward Collision Warning System) and LDWS(Lane Departure Warning System), from the driver-supporting ADAS(Advanced Driver Assistance Systems). However, there is not much basic research on the analysis of bus drivers' traffic accidents in Korea. As such, the time is appropriate to research what is the most necessary ADAS for bus drivers going forward to prevent bus accidents. The purpose of this research is to analyze how serious the accidents were in the different bus routes and whether the accidents were repetitive, and to give recommendations on how to support ADAS for buses, as an improvement. A model of ordered logit was used to analyze how serious the accidents were and as a result, vehicle to pedestrian accidents which directly affected individuals were statistically significant in all of the models, and violations of regulations, such as speeding, traffic signal violation and violation of safeguards for passengers, were indicated in common in several models. Therefore, the pedestrian-sensor system and automatic emergency control device for pedestrian should be installed to reduce bus accidents directly affecting persons in the future, and education for drivers and ADAS are to be offered to reduce the violations of regulations.