• 한국운동역학회지
• /
• 제21권2호
• /
• pp.197-205
• /
• 2011

Various jumping and landing motions are shown during sports event. But most previous studies have not considered landing height and distance simultaneously. The purpose of this study was to identify the effects of landing height and distance on knee injury mechanism. Fourteen male(age: $28.86{\pm}1.99$ yrs, height: $177.00{\pm}4.69$ cm, weight: $76.50{\pm}6.41$ kg) participated in this study. The subjects attempted drop landing task onto the ground from 30 cm to 45 cm heights and to 20 cm to 40 cm distances. The results were as follows. First, higher drop landing height and longer distance showed greater degree of maximal knee flexion and valgus. Second, higher drop landing height and longer distance showed greater maximal knee extension moment and varus moment. Third, higher drop landing height and longer distance showed larger maximal knee absorption power. Lastly, higher drop landing height showed increased Peak GRF. Landing height was more related to the cause of injury, which was indicated by increased maximal knee extension moment, peak GRF and maximal knee absorption power. Landing distance was also associated with increased knee valgus moment and absorption power during landing. These results suggest that landing height and distance may be the cause of injury.

• 한국운동역학회지
• /
• 제24권2호
• /
• pp.151-160
• /
• 2014

The purpose of this study was to investigate the GRF(ground reaction force) parameters according to the shoes's heel heights and ground landing distances during downward stairs on bus. Participants selected as subject were consisted of young and healthy women(n=9, mean age: $21.30{\pm}0.48$ yrs, mean height: $164.00{\pm}3.05cm$, mean body mass: $55.04{\pm}4.41kg$, mean BMI: $20.47{\pm}1.76kg/m^2$, mean foot length: $238.00{\pm}5.37mm$). They were divided into 2-types of shoe's heel heights(0 cm/bare foot, 9 cm) and also were divides into downward stairs with 3 types of landing distance(20 cm, 35 cm, 50 cm). A one force-plate was used to collect the GRF(AMTI, USA) data from the sampling rate of 1000 Hz. The GRF parameters analyzed were consisted of the medial-lateral GRF, anterior-posterior GRF, vertical GRF, loading rate, Center of Pressure(${\Delta}COPx$, ${\Delta}COPy$, COP area) and Dynamic Postural Stability Index(MLSI, APSI, VSI, DPSI) during downward stairs on bus. Medial-lateral GRF and vertical GRF didn't show significant differences statistically according to the shoe's heel heights and landing distance, but 9 cm shoes heel showed higher vertical GRF than that of 0 cm bare foot in landing distance of 50 cm. Also anterior-posterior GRF didn't show significant difference statistically according to the shoe's heel heights, but landing distance of 20 cm showed higher than that of landing distances of 35 cm and 50 cm in anterior-posterior GRF. Loading rate didn't show significant difference statistically according to the landing distance, but 9 cm shoe's heel showed higher than that of 0 cm bare foot during downward stairs. The ${\Delta}COPy$ and COP area didn't show significant differences statistically according to the shoe's heel heights and landing distance, but 0 cm bare foot showed higher than that of 9 cm shoe's heel in ${\Delta}COPx$. Dynamic Postural Stability Index(MLSI, APSI, VSI, DPSI) didn't show significant differences statistically according to the landing distance, but 9 cm shoe's heel showed decreased value than that of 0 cm bare foot in dynamics balance. Considering the above, parameters of GRF showed different characteristics according to the shoe's heel heights and ground landing distances during downward stairs on bus.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.41-47
• /
• 2002

본 논문에서는 일반항공기나 무인항공기의 자동착륙에 적용할 수 있는 착륙 유도 법칙을 제안하고 기존의 일반적인 착륙 과정과의 비교를 통하여 성능을 확인하였다. 착륙 유도법칙은 미사일 요격에서 사용되는 Miss distance 개념과 Lyapunov 안정성 이론에 근거하여 궤환 형태의 속도 및 비행 경로각 명령을 생성할 수 있도록 구성하였다. 기존 문헌에 제시된 항공기의 자동착륙 시뮬레이션을 이용하여 착륙 접근 및 착지 기동 과정을 모사하였다. 착륙 접근의 제U 목적인 강하로 이탈 거리 제거와, 착지 기동시 제어 목적인 고도 제어의 관점에서 새로이 제안하고 있는 착륙 유도 법칙은 기존 방법에 대등 또는 우수한 결과를 얻을 수 있었다. 기준 궤적의 설정에 따라 다양한 비행 궤적 추종이 가능하므로 향후 무인기의 자동 착륙이나 기동 비행의 설계시 적용할 수 있을 것이다.

• 한국항행학회논문지
• /
• 제17권3호
• /
• pp.279-284
• /
• 2013

운항의 여러 단계 중 착륙단계에서 조종사들이 많은 부담을 느낀다. 이는 조종사들이 항공기 속도를 줄이고 접지하여 완전히 정지하는 동안 착륙안전에 영향을 미치는 여러 요소가 있기 때문이다. 만일 착륙하는데 활주로길이가 충분하다면 부담이 적을 수도 있다. 그러나 항상 그런 경우만 있는 것은 아니다. 따라서 착륙성능이 제한범위 내에 있는지 아닌지를 확인할 필요가 있다. 필요착륙거리는 시험비행 조종사에 의해 실증되어진 실제착륙거리에다가 항공사의 평균적인 조종사들을 위한 여유분을 포함한 것이다. FAR의 AFM(항공기 비행규정) 인가는 건조 및 습윤 활주로에서 수동착륙을 기반으로 한다. 기타 다른 활주로 조건에서는 인가가 필요하지 않다. JAR에서는 빙설/윤활활주로에서도 정해진 여유분을 포함시키도록 규정하고 있다. 자동착륙은 인가사항이 아니므로 실제착륙거리만 제공된다. 본 논문에서는 각 활주로 조건에서 포함된 거리 여유분을 분석하고자 한다. 또한 특정한 활주로 조건에서 여유분이 규정되어 있지 않은 경우 대안을 제시하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.59-61
• /
• 2004

For automatic landing of small VTOL UAV, it is necessary to calculate the distance from the UAV and the ground. The distance can be generally measured by a ultra-sonic sensor, but the ultra-sonic sensor has errors according to velocity of a sensor board. To compensate these errors, we proposed a sensor fusion method using a Kalman filter.

• 한국항공우주학회지
• /
• 제44권1호
• /
• pp.12-22
• /
• 2016

달착륙선의 라이다 기반 위험회피 착륙시스템은 기본적으로 목표 착륙지역에 대한 지형 파라미터인 경사와 험준도로 위험도를 계산하고 해당 지역에 대하여 위험도가 최소값을 갖는 점을 안전한 착륙 지점으로 선정한다. 이때, 경사와 험준도만을 고려할 경우 라이다 측정오차에 의해 착륙지가 위험요소 근처로 선정될 수 있으며 이는 착륙선에 위협적이다. 이러한 문제를 해결하고 최대한 안전한 착륙지점을 선정하기 위하여 위험상대거리 기반의 위험도를 기존의 지형파리미터 기반의 위험도와 함께 고려하여야 한다. 본 논문에서는 경사와 험준도 각각에 대한 위험상대거리 기반 위험도가 지형 특성에 따라 착륙지 선정결과에 미치는 영향을 분석하였고, 두 가지 위험상대거리를 동시에 고려하였을 때 가장 좋은 위험회피 착륙 성능을 나타냄을 시뮬레이션과 3차원 뎁스 카메라를 이용한 실험을 통해 확인하였다.

• 한국항행학회논문지
• /
• 제28권3호
• /
• pp.375-378
• /
• 2024

The instrument landing system (ILS) is an international standard established by the International civil aviation organization (ICAO) as one of the landing support facilities for aircraft. This system consists of a localizer (LOC) that provides orientation information about the runway to indicate the approach direction, a glide path (GP) that indicates the appropriate approach glide slope, and three of marker beacons (MB) that indicates the distance to the runway landing edge. In this study, we predicted the received signal strength by altitude and distance for LOC signals transmitted from the ground and analyzed the difference with the signal strength measured in the actual environment. Our objective is to develop signal strength prediction technology and apply it to the real environment.

• Advances in aircraft and spacecraft science
• /
• 제4권1호
• /
• pp.65-80
• /
• 2017

Small aircrafts, Unmanned Aerial Vehicles (UAVs), are used especially for military purposes. Because landing fields are limited in rural and hilly places, take-off or landing distances are very important. In order to achieve a short landing or take-off distance many parameters have to be considered, for instance the design of aircrafts. Hence this paper represents a better design to enlarge the use of fixed wing aircrafts. The document is based on a live and simulated experiments. The various components of designed aircraft are enhanced to create short take-off distance, greater lift and airflow without the need for proper runway area. Therefore, created aerodynamics of the remotely piloted aircraft made it possible to use fixed wing aircrafts in rural areas.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.77-84
• /
• 2013

Most research on the inkjet printing technology has focused on the development of inkjet head itself, and of process, not on the landing accuracy of the droplets to a target. Thus, this paper presents the modeling and experimental verification on the static landing accuracy and precision of the droplets from the magnetostrictive inkjet head. A simple model based on the angle deviation of a nozzle tip and on a distance to a substrate is considered, assuming that there is no ambient effect. The angle deviation of the nozzle tip is determined by using its digital image with the aid of a pixel calculation program, and the distance to the substrate is set to 1 mm. Three experiments have planned and preformed. The first experiment is to collect the initial data for the landing distribution of the droplets. The second experiment is to collect the repeatability data of the stage used. Then, these data are used to rederive the equation for the final landing position of the droplet. The final experiment is to verify the equation and to show the calibration results. The respective landing accuracy of the droplet after calibration on the x-axis and on y axis has improved from $338.51{\mu}m$ and $-133.63{\mu}m$ to $7.06{\mu}m$ and $13.11{\mu}m$. The respective percent improvement on the x-axis and on y axis reaches about 98 and about 90. The respective landing precision of the droplet after calibration on the x-axis and on y axis has improved from ${\pm}182.6{\mu}m$ and ${\pm}182.88{\mu}m$ to ${\pm}24.64{\mu}m$ and ${\pm}42.76{\mu}m$. The respective percent improvement on the x-axis and on y axis reaches about 87 and about 77.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.608-614
• /
• 2008

This paper describes a location tracking system to guide landing process of an Unmanned Helicopter(UMH) exploiting MIT Cricket nodes. For automatic landing of a UMH, a precise positioning system is indispensable. However, GPS(Global Positioning System) is inadequate for tracking the three dimensional position of a UMH because of large positioning errors. The Cricket systems use Time-Difference-of-Arrival(TDoA) method with ultrasonic and RF(Radio Frequency) signals to measure distances. They operate in passive mode in that a listener attached to a moving device receives distance signals from several beacons located at fixed points on ground. Inevitably, this passive type of implementation causes large disturbances in measuring distances between beacons and the listener due to wind blow from propeller and turbulence of UMH body. To cope with this problem, we proposed active type of implementation for positioning a UMH. In this implementation, a beacon is set up at UMH body and four listeners are located at ground area at least where the UMH will land. A pair of Ultrasonic and RF signals from the beacon arrives at several listeners to calculate the position of the UMH. The distance signals among listeners are synchronized with a counter value appended to each distance signals from the beacon.