• 제목/요약/키워드: Land surface temperature

검색결과 523건 처리시간 0.027초

Understanding the LST (Land Surface Temperature) Effects of Urban-forests in Seoul, Korea

  • Kil, Sung-Ho;Yun, Young-Jo
    • Journal of Forest and Environmental Science
    • /
    • 제34권3호
    • /
    • pp.246-248
    • /
    • 2018
  • Urban development and population have augmented the increase of impervious land-cover. This phenomenon has amplified the effects of climate change and increasing urban island effects due to increases in urban temperatures. Seoul, South Korea is one of the largest metropolitan cities in the world. While land uses in Seoul vary, land cover patterns have not changed much (under 2%) in the past 10 years, making the city a prime target for studying the effects of land cover types on the urban temperature. This research seeks to generalize the urban temperature of Seoul through a series of statistical tests using multi-temporal remote sensing data focusing on multiple scales and typologies of green space to determine its overall effectiveness in reducing the urban heat. The distribution of LST values was reduced as the size of urban forests increased. It means that changing temperature of large-scale green-spaces is less influenced because the broad distribution could be resulted in various external variables such as slope aspect, topographic height and density of planting areas, while small-scale urban forests are more affected from that. The large-scale green spaces contributed significantly to lowering urban temperature by showing a similar mean LST value. Both of concentration and dispersal of urban forests affected the reduction of urban temperature. Therefore, the findings of this research support that creating urban forests in an urban region could reduce urban temperature regardless of the scale.

직분식 단기통 디젤기관 피스톤의 순간온도 측정에 관한 실험적 연구 (An Experimental Study on the Measurement of the Instantaneous Surface Temperature of the Piston of the DI Mono Cylinder Diesel Engine)

  • 이재순;이현구;강태경;이응래;정인곤;안병태
    • 한국자동차공학회논문집
    • /
    • 제6권1호
    • /
    • pp.196-204
    • /
    • 1998
  • For the experimental measurement of instantaneous surface temperature of the piston of the DI mono cylinder diesel engine, the instantaneous temperature proves, data acquisition system, and grass-hopper type linkage system were developed. The instantaneous temperatures on the piston bowl, crown, lands and skirt were measured and analyzed, and the following conclusions were derived ; (i) The crank angle for the maximum instantaneous temperature during one cycle varies and moves back and forth by the measuring positions and engine speeds. (ii) The engine speeds, the positions of the measuring points and the cooling water temperature had an effect on the instantaneous temperature amplitude. (iii) The instantaneous temperature suing phenomena appeared on the temperature profiles of the piston crown, top and second land of ring, but on the temperature profiles of the parts of the third land of the fing and skirt, they didn't appear, (iv) The isothermal lines in the piston were acquired through the operation of the finite elements method using the measured temperatures as the boundary conditions.

  • PDF

대구광역시 중구의 가로수 및 열섬 모자이크 현황 분석 (Analysis of Street Trees and Heat Island Mosaic in Jung-gu, Daegu)

  • 김수봉;정응호;김기호
    • 한국환경과학회지
    • /
    • 제15권4호
    • /
    • pp.325-332
    • /
    • 2006
  • The purpose of this paper is to suggest practical suggestions to mitigate Urban Heat Island(UHI) problems in Daegu regarding urban surface temperature. Urban street trees's size and the relations between urban land use types and surface temperature are analysed using aerial photos, the numerical value map and Landsat TM image with special reference to Jung-gu. Total urban street tree's crown size is $156,217.6m^2$ and it is equal to 2.24% of study area. In addition, the size of 'city and residential area' is $6,681,870m^2$(95.7% of study area), which causes UHI and the total size of 'river' shows the lowest surface temperature area and 'road' and 'business and service area' are the highest surface temperature zones. Therefore, it is probable that the network between urban street trees and the lowest surface temperature areas mitigate UHI effects.

Landsat 영상을 이용한 도심의 열변화 탐지 (Detection of Heat Change in Urban Center Using Landsat Imagery)

  • 강준묵;가명석;이성순;박준규
    • 한국측량학회지
    • /
    • 제28권2호
    • /
    • pp.197-206
    • /
    • 2010
  • 최근 선진국들은 도시의 열섬현상에 대한 많은 문제점들을 인식하고, 이에 대한 대책을 마련하기 위해 끊임없이 노력하고 있다. 본 연구에서는 위성영상을 이용하여 도심의 개발사업이 진행됨에 따른 토지의 피복변화량을 추출하고 이 변화량이 도심의 열변화에 미치는 영향을 분석하고자 하였다. 1985년 4월, 1994년 8월, 2001년 5월, 2009년 5월에 해당하는 4개의 Landsat 위성영상을 이용하여 대전광역시의 토지피복변화에 따른 열변화를 분석하였다. 도심의 지표면 온도를 추출하기 위해 Landsat TM 열적외선 영역센서인 Band 6의 분광밝기정도를 이용하여 표면온도분포를 산출하였으며, 이를 통해 도시화로 인한 열분포의 변화를 탐지하고자 하였다. 그 결과, 도심지의 면적이 최대 23.59% 상승한 반면 산림지역은 최대 27.91% 감소하였고, 도시화로 인해 도심의 지표온도가 주변지보다 높게 나타났으며, 이 경우 산림지역에 비해 약 $2.4^{\circ}C{\sim}5.7^{\circ}C$ 높게 형성되어 있음을 알 수 있었다.

Comparison of Land Surface Temperature Algorithm Using Landsat-8 Data for South Korea

  • Choi, Sungwon;Lee, Kyeong-Sang;Seo, Minji;Seong, Noh-Hun;Jin, Donghyun;Jung, Daeseong;Sim, Suyoung;Jung, Im Gook;Han, Kyung-Soo
    • 대한원격탐사학회지
    • /
    • 제37권1호
    • /
    • pp.153-160
    • /
    • 2021
  • Land Surface Temperature (LST) is the radiological surface temperature which observed by satellite. It is very important factor to estimate condition of the Earth such as Global warming and Heat island. For these reasons, many countries operate their own satellite to observe the Earth condition. South Korea has many landcovers such as forest, crop land, urban. Therefore, if we want to retrieve accurate LST, we would use high-resolution satellite data. In this study, we made LSTs with 4 LST retrieval algorithms which are used widely with Landsat-8 data which has 30 m spatial resolution. We retrieved LST using equations of Price, Becker et al. Prata, Coll et al. and they showed very similar spatial distribution. We validated 4 LSTs with Moderate resolution Imaging Spectroradiometer (MODIS) LST data to find the most suitable algorithm. As a result, every LST shows 2.160 ~ 3.387 K of RMSE. And LST by Prata algorithm show the lowest RMSE than others. With this validation result, we choose LST by Prata algorithm as the most suitable LST to South Korea.

대도시 외곽지역 논경작지의 토지이용 및 피복변화에 따른 온도 변화모형 연구 (A Study on Temperature Change Profiles by Land Use and Land Cover Changes of Paddy Fields in Metropolitan Areas)

  • 기경석;이경재
    • 한국조경학회지
    • /
    • 제37권1호
    • /
    • pp.18-27
    • /
    • 2009
  • 본 연구는 도시미기후 측면에서 냉섬 역할을 하는 논경작지의 대규모 택지개발로 인한 도시기온 변화량를 분석하여 논경작지 보존을 위한 기초자료를 제공하고 도시온도 상승을 줄일 수 있는 방안을 제시하고자 하였다. 인천시 부평구와 부천시의 개발 전 후 토지피복 변화를 분석하기 위해 1989년 5월 17일과 2000년 5월 7일 위성영상을 산림, 초지 및 식재지, 논경작지, 나지, 시가화 지역을 구분하여 분석한 결과, 기존 인천시 부평구와 부천시 중앙에 넓게 분포하고 있던 논경작지 대부분이 신도시 건설로 인해 시가화 지역과 개발 중인 나지로 변한 것으로 분석되었다. 토지피복변화 유형별 지표면 온도 변화 현황 분석 결과, 지표면 온도가 높아진 주요 유형은 논경작지에서 나지로 변화된 유형($+1.4939^{\circ}C$), 논경작지에서 시가화 지역으로 변화된 유형($0.9356^{\circ}C$)이었다. 논경작지 토지이용 변화에 따른 온도 변화 영향요인을 분석하기 위해 논경작지 변화지역을 대상으로 블록별 평균 지표면 온도차를 분석한 결과, 1989년 세부 연구대상지는 논경작지였기 때문에 $19{\sim}20^{\circ}C$ 사이의 균일한 온도분포를 나타낸 반면, 시가화 지역으로 변한 2000년 블록별 지표면 온도는 $19.1{\sim}23.9^{\circ}C$로 온도편차가 크고 분포가 다양하게 나타나고 있었다. 논경작지 토지이용 변화에 따른 도시기온 변화 원인 분석을 위해 지표면 온도 변화량과 도시기온 변화 영향요인간 상관관계를 분석한 결과, 녹지율 상관계수는 -0.662로 강한 음의 상관관계를 보였으며, 건폐율, 불투수포장율, 용적율은 지표면 온도 변화량과 상관계수가 +0.231, +0.226, +0.123으로 통계적 유의성이 인정되지 않았다. 논경작지 토지이용 변화에 따른 지표면 온도 변화모형을 구축하기 위해 녹지율을 독립변수로 지표면 온도 변화량을 종속변수로 한 회귀분석을 실시한 결과, 기존 논경작지에서 시가화 지역으로 변화할 경우 녹지율 및 불투수포장율이 0%라 가정할 때 $+3.889^{\circ}C$의 온도 상승이 예상되며 녹지율이 10% 증가할 때마다 $+3.889^{\circ}C$에서 $-0.430^{\circ}C$ 만큼 온도저감 효과가 있는 것으로 분석되었다.

Landsat 7 ETM+ 위성영상을 이용한 전남산업단지의 지표온도 (Land Surface Temperatures of Industrial Complexes in Jeonnam Using Landsat 7 ETM+ Satellite Images)

  • ;;허정원;한동엽
    • 지역연구
    • /
    • 제31권3호
    • /
    • pp.99-112
    • /
    • 2015
  • 기상관측망은 충분히 고밀도로 구축되어 있기 않기 때문에 산업지역의 전체 지표온도를 얻기는 쉽지 않다. 넓은 지역에 걸쳐 취득하고 짧은 시간에 처리할 수 있는 다기능 원격탐사 정보를 통하여 특정지역에서 현재의 변화하는 지표온도를 정확하고 연속적으로 관측할 수 있다. 전라남도는 광양제철소, 여수산업단지, 율촌산업단지, 대불산업단지와 같은 많은 산업단지와 함께 빠르게 산업화되고 있다. 산업단지 내 지표온도 특성을 살펴보기 위하여 본 연구는 Landsat 7 ETM+의 열적외 파장영상을 이용하여 4개의 산업단지의 지표온도를 비교하였다. 이로부터 환경적 자연적 자원관리를 위한 산업단지의 기초자료를 얻을 수 있었다. 연구 결과는 산업단지계획가에서 환경적 문제와 관련된 개발방식에 도움을 줄 수 있다.

A Numerical Study of Mesoscale Model Initialization with Data Assimilation

  • Min, Ki-Hong
    • 한국지구과학회지
    • /
    • 제35권5호
    • /
    • pp.342-353
    • /
    • 2014
  • Data for model analysis derived from the finite volume (fv) GCM (Goddard Earth Observing System Ver. 4, GEOS-4) and the Land Data Assimilation System (LDAS) have been utilized in a mesoscale model. These data are tested to provide initial conditions and lateral boundary forcings to the Purdue Mesoscale Model (PMM) for a case study of the Midwestern flood that took place from 21-23 May 1998. The simulated results with fvGCM and LDAS soil moisture and temperature data are compared with that of ECMWF reanalysis. The initial conditions of the land surface provided by fvGCM/LDAS show significant differences in both soil moisture and ground temperature when compared to ECMWF control run, which results in a much different atmospheric state in the Planetary Boundary Layer (PBL). The simulation result shows that significant changes to the forecasted weather system occur due to the surface initial conditions, especially for the precipitation and temperature over the land. In comparing precipitation, moisture budgets, and surface energy, not only do the intensity and the location of precipitation over the Midwestern U.S. coincide better when running fvGCM/LDAS, but also the temperature forecast agrees better when compared to ECMWF reanalysis data. However, the precipitation over the Rocky Mountains is too large due to the cumulus parameterization scheme used in the PMM. The RMS errors and biases of fvGCM/LDAS are smaller than the control run and show statistical significance supporting the conclusion that the use of LDAS improves the precipitation and temperature forecast in the case of the Midwestern flood. The same method can be applied to Korea and simulations will be carried out as more LDAS data becomes available.

지표면의 특성을 고려한 대기경계층내의 열수지 parameter 추정 -열수지 parameter를 이용한 중규모 순환의 수치예측- (Estimation of the Heat Budget Parameter in the Atmospheric Boundary Layer considering the Characteristics of Soil Surface)

  • 이화운;정유근
    • 한국환경과학회지
    • /
    • 제5권6호
    • /
    • pp.727-738
    • /
    • 1996
  • An one dimensional atmosphere-canopy-soil interaction model is developed to estimate of the heat budget parameter in the atmospheric boundary layer. The canopy model is composed of the three balance equations of energy, temperature, moisture at ground surface and canopy layer with three independent variables of Tf(foliage temperature), Tg(ground temperature), and qg(ground specific humidity). The model was verilied by comparative study with OSUID(Oregon State University One Dimensional Model) proved in HAPEX-MOBILHY experiment. Also we applied this model in two dimensional land-sea breeze circulation. According to the results of this study, surface characteristics considering canopy acted importantly upon the simulation of meso-scale circulation. The factors which used in the numerical experiment are as follows ; the change for a sort of soil(sand and peat), the change for shielding factor, and the change for a kind of vegetation.

  • PDF

Retrieving Land surface Component Temperature Using Multi-Angle Thermal Infrared Data

  • Wenjie, Fan;Xiru, Xu
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.1362-1364
    • /
    • 2003
  • As non-isothermal mixed pixel is widely existed, the pixel-mean temperature cannot adequately represent the actual thermal state of land surface. The row crop was chosen as target to discuss the problem of component temperature retrieval. At first, the matrix model was found to express the thermal radiant directionality of the target. Then correlation of multi-angle infrared radiance was analyzed. In order to increase the retrieving accuracy, we chose the retrievable parameters and established the iterative method combining with inverse matrix to retrieve component temperature. It was proved by field experiment that the method could improve the retrieving accuracy and stability remarkably.

  • PDF