• Journal of Navigation and Port Research
• /
• v.35 no.8
• /
• pp.631-636
• /
• 2011

Stable power supply to a light mounted on a navigational buoy is indispensable factor because unstable power can lead to fatal marine accident. Despite the difference lies between onshore and offshore environment, as well as the power output characteristics, the PV(Photovoltaic) power generation system is designed by the independent onshore power generation system standards. Furthermore, the capacity of PV power generation system does not take into account the structural characteristics of the buoy in the sea. Therefore, the faulty design makes battery over-discharge owing to lack of the power generation and the battery can not supply stable power to the light. This paper introduces a design method for a power system of the PV powered buoy. The data has been acquired for 3 months period, which includes PV-generated electricity, power consumption and battery voltage from experimental buoy. Further, a power management features of the buoy has been analyzed based on the acquired data. From the analysis of the acquired data, it was evident that PV power generation system produces different electric power output depend on its installed environment - land and sea. Based on the analytical result, a design criterion has been proposed for the power system in the navigational buoy.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.233-238
• /
• 2003

Due to the impermeability of outer wall facilities such as Breakwaters which dissipates the wave energy and keeps harbor tranquility, the enclosed area of harbor becomes partially blocked and the water exchange can be reduced. Recent trends of port development protect water quality and emphasize Water-Front, so the method which enhances the circulation of harbor waters and the dilution of the water pollutants are studied. The best improvement of water quality is a remove of pollutant source on land, but an enclosed port must be enhanced the tidal exchange. For this end, the best improvement may be made a drain-route on the existing outer wall facilities. In this study, the numerical computations were carried out to predict the circulation of harbor waters and the tidal exchange through the drain-rout in the polluted harbor(Samchonpo-guhang) located at the east coast of South Sea. Computational models adopting FDM(Finite Difference Method) were used here and were already verified from the previous studies und ocean survey. As a result of this study, circulation and the tidal exchange at the harbor before and after introduction of drain-route were assessed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.476-482
• /
• 2013

This study aims to enhance the effectivity of VTS(Vessel Traffic Service) control by investigating the minimum safe distance between vessel and vessel, vessel and land(obstacle) for the vessel's safe navigation within the VTS control area. In addition, to suggest basic data for the safe navigation, this study has done survey and analysis to each VTS center, and individual on the minimum safe distance to VTS operators of each ports of korea. Through ocean voyage by training ship, Singapore and Malacca strait's congested vessel traffic zone's control distance was compared and investigated the difference on safe distance by the different VTS operators. As a result, there was huge difference of minimum safe distance between the VTS operators belong to the same center. Over all, the port with gentle coastline, like donghae, the safe distance was wider than the other port. On the other hand, port with complex coastline and frequent entry and departure of the vessel, like mokpo, the safe distance was the shortest of all. Therefore, development of module suitable to port's natural conditions and traffic volume's necessity is required, for the operators affiliated to the same VTS center control according to formal method. Lastly, the full discussion by the expert group about establishment of standard control procedure in the future should be considered as well.

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.397-404
• /
• 2010

The Currently, most cargos of container transshipment between Busan Port and New Port are transported over land, and the rest is transported by barge. This study estimated firstly the traffic between those ports through simulations in order to analyze the feasibility of container transshipment by barge. It forecasted annual profitability using determinants to affect on the barge business by the traffic, and then, discussed the feasibility. This study supposed the flexible scenarios with 50%, 60%, 80%, or 100% transshipment and the 25 monthly barge service numbers between two ports, and measured the influences of different factors according to the above various scenarios. And then the sales were evaluated by the different traffics and freights scenarios provided the business would be actually operated. Finally, Net incomes were simulated to analyze the feasibility of different scenarios by various traffics and freights. The net income should be positive to get the feasibility. To achieve this, the minimum traffic should be secured and the lowest freight per TEU should be determined. While all countries of the world is controlling CO2 emissions and emphasizes the green logistics, this study contributed to solve at the same time the problems about the pollution and the efficiency of transportation by reviewing positively the feasibility of barge transportation as an alternative to transportation overland.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1991.06a
• /
• pp.37-44
• /
• 1991

영산강 하구언 방조제의 건설로 인한 항만 및 이의 인접해역 해면의 변화는 예상한 바 있으며 실제 여러개소에서 월 2회정도의 주기로 목포 구항부근 상업지역에서 해면상승에 따라 주기적으로 침수되는 현상이 나타나고 있다 목포항의 영산강 하구언 방조제 조성으로 인한 조류성분중 최고기록을 가진 수로에서는 6kts 정도로 감소된 것으로 보고되고 있으나 주위자연환경 변화에 따른 수면 상승 및 해수면의 주기적인 변화 등에 대한 상세한 언급 및 깊이 있는 분석은 회피되어왔다. 수자원의 효율적관리를 위해 하구언 방조제는 이미 건설되었고 앞으로 대규모의 항만개발과 대불산업단지조성을 위해 추가 3개의 만입해안해역에 댐으로 해역을 막아 매립공사를 추진하고 있다 그러나 이 지역에 대한 분석은 타당성의 여부만을 강조한 상업적 용역이 이루어지고 있고 장래 개발에 대해 학술적이고 실질적인 문제점 추출과 해결방아네 대해서는 무시하거나 경시한 바가 많다 더구나 태풍 저기압 등과 같은 자연재해를 고려한 분석은 시도되지 못하고 있다 따라서 개발전후의 현상에 대한 상세한 자료 및 현장 조사와 극한 상태를 고려하여 개발에 따른 수위상승 부진동, 조류 수질등 이해역의 변화요소를 수집하고 분석하며 과학적 접근방법에 기초를 둔 수치모델의 실험을 포함하여 현장관측 및 측정자료를 검증하는 것이 필수적이라고 사료되어 종합분석의 한단계로 여기서는 하구언 및 하구간척(Land Reclamatic of Estuary barren)으로 해역축소에 따른 해면변화의 실제현상을 조사하여 정리하고 이를 수치모델을 통해 시뮬레이션하여 보았다 이는 종합개발의 좋은 기초자료로 이용됨은 물론이로 이지역의 개발에 기여할 것으로본다.적절하게 가정된 지반의 응력-변형률 관계와 간극수압특성에 의하여 고려되었다. 그 결과 응력 및 변위가 심하게 발생하는 지역은 황색 점토층이었으며 이로부터 황색 점토층에서 부터 파괴면이 생성되어 다른 지역으로 전파되었음을 유추할 수 있었다.form trap with 2.88[eV] deep of injected space charge from the chathode in the crystaline regions. The origin of ${\alpha}$$_2$ peak was regarded as the detrapping process of ions trapped with 0.9[eV] deep originated from impurity-ion remained in the specimen during production process of the material, in the crystalline regions. The origin of ${\beta}$ peak was concluded to be due to the depolarization process of "C=0"dipole with the activation energy of 0.75[eV] in the amorphous regions. The origin of ${\gamma}$ peak was responsible to the process combined with the depolarization of "CH$_3$", chain segment, with the activation energy of ca

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.452-455
• /
• 2009

The Nakdong Delta can be identified by two different geomorphic units. The first one is the upper delta. This is mostly composed of inter-distributary islands that are largely influenced by fluvial processes and attributed to the development of these islands along the river. The other one is the lower delta which is mostly composed of beach ridges. Barrier islands are largely effected by wave processes promoted by the development almost at a right angle to the river. Influenced by the longshore current which flows to the same direction, barrier islands located in the Nakdong river estuary are developing from east to west direction. As a result, the eastern end of the barrier islands are growing toward the north-west direction effected by tidal current which moves toward the same direction. Barrier islands include the Sinho Island, the Jinwoo Island, the Daema deung, the Janga Island, the Baghap deung, the Sae deung, and the Chulsae deung(Doyeo deung). They have orderly emerged from the sea since 1861. Since 2008, a new Deung, a sand dune growing under sea, has been developing rapidly from Chulsae deung to the Dadaepo beach. It made the sailing of small fisher boats impossible. Tidal currents transported a lot of sand and silt around the barrier islands. The landscape of Nakdong river estuary where many barrier islands are distributed will change rapidly affecting land environment.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.397-402
• /
• 2021

The real-name electric fishing gear system is one of the important policy capable to build 'abundant fishing ground' and to protect marine environment. And, fishing gear automatic-identification system is one of IoT services that can implement above-mentioned policy by using communication such as low power wide area (LPWA) and multi-sensing techniques. Fishing gear automatic -identification system can gather the location data and lost/hold data from electric buoy floated in sea and can provide them to fishermen and monitoring center in land. We have developed the communication modules and electric buoy consisted of fishing gear automatic-identification system. In this paper, we report the test results of communication distance between electric buoy and wireless node installed in fish boat and location error of electric buoy. It is confirmed that line of sight (LOS) distance between electric buoy and wireless node is obtained to be 62 km, which is two times of the desired value, and location error is obtained to be CEP 1 m, which is smaller than the desired value of CEP 5 m. Therefore, it is expected that service area and accuracy of the developed fishing gear automatic-identification system is more extended.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.346-351
• /
• 2021

With the goal of eradicating overwork, overload, and speeding of general freight cars(cargo) by the Ministry of Land, Infrastructure and Transport, Infrastructure and Transport, the "The Fare of safe transportation for freight cars System" has been enforced since 2020. 'The Fare of safe transportation for freight cars' rate for each item is being applied and supplemented, but the 'The Cost of safe transportation for freight cars' of general freight cars (cargo) and steel items is under discussion. The purpose of this study was to estimate the willingness to pay( WTP) for cargo. A survey was conducted on shippers, transportation companies (arrangers, carriers), and cargo drivers (using direct questioning among contingent valuation method (CVM) and the Tobit Regression analysis was conducted, and the average and median values of freight rates were derived using the estimated results, and the willingness to pay by tonnage of freight cars was confirmed. It is expected that the results of this study can be used as a reference to the "The Fare of safe transportation for freight cars Committee" an organization for deliberation and resolution of the 'The Cost of safe transportation for freight cars'.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.323-328
• /
• 2019

In order to construct 3D geospatial information about the terrain, current measurement using a total station, remote sensing, GNSS(Global Navigation Satellite System) have been used. However, ground survey and GNSS survey have time and economic disadvantages because they have to be surveyed directly in the field. In case of using aerial photographs and satellite images, these methods have the disadvantage that it is difficult to obtain the three-dimensional shape of the terrain. The terrestrial LiDAR can acquire 3D information of X, Y, Z coordinate and shape obtained by scanning innumerable laser pulses at densely spaced intervals on the surface of the object to be observed at high density, and the processing can also be automated. In this study, terrestrial LiDAR was used to analyze slope displacement. Study area slopes were selected and data were acquired using LiDAR in 2016 and 2017. Data processing has been used to generate slope cross section and slope data, and the overlay analysis of the generated data identifies slope displacements within 0.1 m and suggests the possibility of using slope LiDAR on land to manage slopes. If periodic data acquisition and analysis is performed in the future, the method using the terrestrial lidar will contribute to effective risk slope management.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.23-32
• /
• 2019

In this paper, we proposed a multi-chain Time of Arrival (ToA) positioning method to estimate positions using all received Loran-C signals from multiple chains without constraining to a single chain. Conventionally, we have to choose only one chain among several available chains for position estimation using Loran-C. Therefore, the number of signals to be used for positioning is limited to three to five. In general, if more signals are used for positioning estimation, its performance tends to be improved in terms of accuracy and availability. To validate the proposed method for multi-chain Loran-C, we firstly carried out a static positioning test in land. By analyzing the test results, we confirmed that the proposed method works well under a multi-chain Loran-C scenario. Subsequently, another mobile positioning test was conducted on board a vessel under a practical application scenario. From this second test, we successfully demonstrated that the multi-chain ToA positioning method even in situations where the conventional single-chain Loran-C approach fails for positioning.