• Rapid Communication in Photoscience
• /
• v.3 no.3
• /
• pp.53-55
• /
• 2014

The shade avoidance syndrome is a morphological and physiological response when plants are exposed to shade. Recent work in Arabidopsis had begun to define the molecular components of the shade avoidance syndrome in dicotyledonous model plant. However, little is known about the shade avoidance response networks in agriculturally important monocotyledon crops such as rice. Here, we found that the degree of bending at the lamina joint is inversely proportional to the R:FR ratio. To elucidate which phytochrome is involved in this response, we did lamina joint inclination assay with the rice phytochrome-deficient mutants (osphyA, osphyB, and osphyC) and the wild type plants. Whereas the osphyA and osphyC knockout mutants bent at the lamina joint in the far-red rich condition as the wild type plants, the osphyB knockout mutants no longer bent at the lamina joint in the far-red rich condition. These results suggest that PHYB acts as a sole photoreceptor in the lamina joint inclination response in rice.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.809-820
• /
• 2016

The goal of this study was to predict lamina yield from logs of different diameter for production of cross laminated timber. Log characteristics of red pine (Pinus densiflora) and Japanese cedar (Cryptomeria japonica), including diameter, length, volume, and defects were used for statistical and geometrical analyses, along with the lamina characteristics, including width, thickness, and defects. Based on the data obtained, the strong factors influencing the yield and grade of lamina from the two species were statistically evaluated. A geometrical approach was used for analysis of the yield from logs of given diameters. Statistical analysis showed that lamina yield was dependent on target lamina size but the grade of lamina was not related to any of the log characteristics. The suggested yield equations from the geometrical approach indicated an accuracy of less than 20% difference.

• Journal of Ship and Ocean Technology
• /
• v.1 no.2
• /
• pp.11-18
• /
• 1997

The leading edge of a low-drag super-cavitating foil has been made to be thick enough by using a point drag which is supposed to be a linear model of the Kirchhoff lamina. In the present paper, the relation between the point drag and the Kirchhoff lamina is made clear by analyzing the cavity drag of both models and the leading edge radius of the point drag model and the lamina thickness of Kirchhoff\`s profile K. The matched asymptotic expansion is effectively made use of in designing a practical super-cavitating fool which is not only of low drag but also structurally sound. Also it has a distinct leading edge cavity separation point. The cavity foil shapes of trans-cavitating propeller blade sections designed by present method are shown.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1465-1478
• /
• 2015

The effect of cutting off fibers on transient load in a polymeric matrix composite lamina was studied in this paper. The behavior of fibers was considered to be linear elastic and the matrix behavior was considered to be linear viscoelastic. To model the viscoelastic behavior of matrix, a three parameter solid model was employed. To conduct this research, finite difference method was used. The governing equations were obtained using Shear-lag theory and were solved using boundary and initial conditions before and after the development of break. Using finite difference method, the governing integro-differential equations were developed and normal stress in the fibers is obtained. Particular attention is paid the dynamic overshoot resulting when the fibers are suddenly broken. Results show that considering viscoelastic properties of matrix causes a decrease in dynamic load concentration factor and an increase in static load concentration factor. Also with increases the number of broken fibers, trend of increasing load concentration factor decreases gradually. Furthermore, the overshoot of load in fibers adjacent to the break in a polymeric matrix with high transient time is lower than a matrix with lower transient time, but the load concentration factor in the matrix with high transient time is lower.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.64-70
• /
• 2007

Of all the rapid tooling (RT) methods currently available, thick-layer laminated tooling is the most suitable for large-scale, low-cost dies and molds. Currently, the determination of a lamina's contour or profile and the associated slicing algorithms are based on existing rapid prototyping (RP) data manipulation technology. This paper presents a new adaptive slicing algorithm developed exclusively for profiled edge laminae (PEL) tooling PEL tooling is a thick-layer RT technique that involves the assembly of an array of laminae, whose top edges are simultaneously profiled and beveled using a line-of-sight cutting method based on a CAD model of the intended tool surface. The cutting profiles are based on the intersection curve obtained directly from the CAD model to ensure geometrical accuracy. The slicing algorithm determines the lamina thicknesses that minimize the dimensional error using a new tool shape error index. At the same time, the algorithm considers the available lamination thicknesses and desired lamina interface locations. We demonstrate the new slicing algorithm by developing a simple industrial PEL tool based on a CAD part shape.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.2
• /
• pp.229-237
• /
• 2021

Objective : Expansion in the spinal canal area (SCA) after laminoplasty is one of the critical factors to relieve the preoperative symptoms. No previous study has compared the increases in SCA achieved by open-door laminoplasty (ODL) and double door laminoplasty (DDL) according to the preoperative lamina angle (LA). This study was designed to clarify the relationship between the laminoplasty opening angle (OA)/laminoplasty opening size (OS) and increases in the SCA following ODL and DDL according to the preoperative LA using a simulation model. Methods : The simulation model was constructed and validated by comparing the clinical data of 64 patients who had undergone C3-C6 laminoplasty (43 patients with ODL and 21 patients with DDL). SCA expansion was predicted with a verified simulation model at various preoperative LAs (from 28° to 32°) with different OAs (40° to 44°) and OSs (10 mm to 14 mm) recruited from patient data. Results : The constructed simulation model was validated by comparing clinical data and revealed a very high degree of correlation (r=0.935, p<0.001). In this validated model, at the same OA, the increase in SCA was higher following ODL than following DDL in the usual LA (p<0.05). At the same OS, the increase in SCA was slightly larger following DDL than following ODL, but the difference was not significant (p>0.05). The difference was significant when the preoperative LA was narrower or much wider. Conclusion : Based on clinical data, a simulation model was constructed and verified that could predict increases in the SCA following ODL and DDL. When applying this model, prediction in SCA increase using the OS parameter was more practical and compatible with clinical data. Both laminoplasties achieved enough SCA, and there was no significant difference between them in the usual range.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.340-346
• /
• 1998

In order to improve the prediction of dynamic behavior in structures, several lower vibration modes from FFT analysis through experiments are used to update the mechanical properties followed by the updated frequencies from numerical analysis. Performance index consists of the sum of error norms between the chosen frequencies and corresponding frequencies from numerical analysis. As an updating process of the natural frequencies, the optimization algorithm based on conjugate gradient method is adopted. The gradient of performance index is calculated using the sensitivity of selected eigenvalues with respect to each design parameter. The mechanical properties of lamina, E$\_$l/, E$\_$2/, .nu.$\_$12/ and G$\_$12/, are design parameters for the updating process. The proposed method is applied to predict the dynamic behavior of composite laminated plates of [0]$\_$8T/ and [.+-.45]$\_$2S/ separately or interchangeably. Also, the mixed case for [0]$\_$8T/ and [.+-.45]$\_$2S/ is exarm'ned to check the possibility for the improved prediction generally. The good agreement is obtained between the measured frequencies and the numerical ones. Based on the results for all the cases studied, the proposed approach has a clear potential in characterizing the mechanical properties of composite lamina.

• Structural Engineering and Mechanics
• /
• v.28 no.5
• /
• pp.603-633
• /
• 2008

A four-node plate finite element for the analysis of laminated composites which is developed using strain gradient notation is presented. The element is based on a first-order shear deformation theory and on the equivalent lamina assumption. Strains and stresses can be calculated at different points through the thickness of the plate. They are averaged values due to the equivalent lamina assumption. A shear correction factor is used as the transverse shear strain is taken to be constant over the plate thickness while its actual variation is parabolic. Strain gradient notation, which is physically interpretable, allows for the detailed a-priori analysis of the finite element model. The polynomial expansions are inspected and spurious terms responsible for modeling errors are identified in the shear strains polynomial expansions. The element is corrected by simply removing the spurious terms from the shear strains expansions. The element is implemented into a FORTRAN finite element code in two versions; namely, with and without spurious terms. Results are compared to show the effects of the spurious terms on the solutions. It is also shown that a refined mesh composed of corrected elements provides solutions which approximate very well the analytical solutions, validating the procedure.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.97-103
• /
• 2006

The development of a heat exchanger production model based on the microlamination technology and it's economic efficiency is addressed. A microchannel production model is proposed for the high-volume production. The microlamination system is made up of lamina patterning, laminae sorting and laminae bonding. A cost estimation model is developed based on the hewn cycle time and capital equipment costs. An economic efficiency analysis is performed to determine the cost drivers under the different market and product scenarios. The result of the economic efficiency analysis indicated that the device size and the production rate have a great effect on the overall manufacturing cost of microlamination devices. And it can be concluded that the microlamination should focus on bonding larger laminae and reducing both cycle time and warpage.

• Structural Engineering and Mechanics
• /
• v.22 no.5
• /
• pp.599-611
• /
• 2006

The theory with hierarchical warping functions had been used to analyze composite thin-walled structure, laminated beam and had good results. In the present paper, a series of hierarchical warping functions are developed to analyze the cylindrical bending problems of composite lamina. These warping functions which refine through-the-thickness variation of displacements were composed of basic and corrective functions by taking into account of anisotropic, material discontinues, and transverse shear and normal strain. Then the hierarchical finite element method was used to form a numerical algorithm. The distribution of the displacements, in-plane stresses, transverse shear stresses and transverse normal stress for composite laminate were analyzed with the present model. The results show that the present model has precise mechanical response compared with the first deformation transverse theory and the corrective order affects the accuracy of result.