• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.99-100
• /
• 1993

Calorimetric (D.S.C) studies were carried out on the nylon 4,6 single crystals grown from 1,4-butanediol solution at various crystallisation temperatures, based on the assessment of the lamellar thickness by small angle x-ray scattering. Samples were annealed mainly ot get rid of residual solvents inside the crystals. The effect of annealing on the crystal perfection is inferred from the measured thermal properties of the crystals. Accordig to the scanning rates less than 80 K/min., D. S C. melting peaks indicate that changes in the internal morphology of nylon 4,6 crystals preapred at different crystallisation temeratures yield a thermodynamic melting temperature. Tm, of 319 $^{\circ}C$, for the infinitely extended crystal thickness (1/ι). The obtained heat of fusion value for the inginite crystal thickness, Ho, was 270 J/g from the plot of measured feat of fusion ($\Delta$Hm) vs. reciprocal crystal thickness (1/ι). based on these values, the fold surface energy, $\delta$e. of 65.4 erg/$\textrm{cm}^2$ was obtained from Hoffman-Waeeks equation. The thermodynamic melting temperature and heat of fusion of the infinite crystal thickness for the solution grow nylon 4,6 single crystals are found to be higher than of the reported corresponding solution grown nylon 6,6 single crystals. pbtained crystallinity from D. S. C measurements ranges from 40 to 50 %, which is close to the reported yalue for the nylon 6,6 single ctystals but lower than we expected.

• Applied Microscopy
• /
• 제23권2호
• /
• pp.107-123
• /
• 1993

The ultrastructural changes of the cardiac ganglion and granule-containing cells in the heart of vacor-induced diabetic Mongolian gerbils were studied by electron microscopy. After one month of vacor-induced diabetes the ganglion cells showed increase in numbers of dense bodies and mitochondria compared with the normal cardiac ganglion. Most of the satellite cells were filled with numerous phagosomes containing digested debris. Both electron-dense and lucent types of degenerating axon terminals were observed. The former was characterized by clusters of agranular vesicles and numerous mitochondria. The electron lucent type of degenerating axon terminal contained a few agranular vesicles and swollen mitochondria. Degenerating unmyelinated and myelinated axons contained large numbers of dense bodies, lamellar bodies, and mitochondria. Numerous macrophages containing phagosomes were reveled in the interstitial spaces. Some of the granule-containing cells in the heart showed a variety of degenerative changes and a decreased number of dense-cored vesicles. After three months of vacor-induced diabetes the unmyelinated and myelinated axons showed degenerative changes, whereas no structure changes could be demonstrated in intraatrial ganglion and granule containing cells. The satellite cells containing engulfed debris were observed in the cardiac ganglion cells. These results suggest that the degenerative changes occur in the cardiac ganglion cells of vacor-induced diabetic Mongolian gerbils as well as atrial granule-containing cells.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.279-279
• /
• 2010

Smart gels have recently associated with photonic crystals to form photonic gels. Since these photonic gels are capable of reversibly converting the volume change of gels induced in response to external chemical or electric stimuli into characteristic optical signals, they have been considered not only as a good platform for label-free chemical or biological detection, actuators or optical switches but also as a good model system to investigate gel swelling behaviour. Recently, we reported block copolymer photonic gels self-assembled from polystyrene-b-poly(2-vinyl pyridine) (PS-b-P2VP) block copolymers, and demonstrated that selective swelling of lamellar structure allows extremely large tunability of the photonic stop band from UV region to IR region ($\lambda$ peak=350~1,600 nm). Herein we report block copolymer photonic gels which exhibit strong tunable optical hysteresis and their applications. As nonlinear responses in swelling of hydrogels were often observed, photonic gels exhibit optical hysteresis with change of external pH. We demonstrate such optical hysteresis can be precisely programmed by controlling ion-pairing affinity. We anticipate that photonic gels with carefully tunned optical hysteresis are applicable to optical memory devices.

• 대한금속재료학회지
• /
• 제48권10호
• /
• pp.936-941
• /
• 2010

Al-Zn based alloys are the most common types of wrought Al alloys. Although Al-Zn alloys have high strength, they cannot be applied to a conventional casting process. In this study, Al-Zn-based alloys applicable to a die casting process were developed successfully. The developed Al-45 wt% Zn-based alloys showed a fine equiaxed grain structure and high strength. A fine equiaxed grain having an average size of $25{\mu}m$ was obtained by the die casting process. The UTS and elongation of the new alloy are 475 MPa and ~3.5%, respectively. In addition, we elucidate the effect of a Zn addition on variations in different mechanical properties and the microstructure characteristics of (Al96.3-xZnxCu3Si0.4Fe0.3) x=20, 30, 40, and 45 wt% alloys fabricated by a die casting process.

• 한국분말재료학회지
• /
• 제25권6호
• /
• pp.514-522
• /
• 2018

Layered-double hydroxide (LDH)-based nanostructures offer the two-fold advantage of being active catalysts with incredibly large specific surface areas. As such, they have been studied extensively over the last decade and applied in roles as diverse as light source, catalyst, energy storage mechanism, absorber, and anion exchanger. They exhibit a unique lamellar structure consisting of a wide variety of combinations of metal cations and various anions, which determine their physical and chemical performances, and make them a popular research topic. Many reviewed papers deal with these unique properties, synthetic methods, and applications. Most of them, however, are focused on the form-factor of nanopowder, as well as on the control of morphologies via one-step synthetic methods. LDH nanostructures need to be easy to control and fabricate on rigid substrates such as metals, semiconductors, oxides, and insulators, to facilitate more viable applications of these nanostructures to various solid-state devices. In this review, we explore ways to grow and control the various LDH nanostructures on rigid substrates.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.605-612
• /
• 2018

This work investigates the relationships between the static mechanical properties of Ti-6Al-4V manufactured through selective laser melting (SLM) and post-process heat treatments, namely stress relieve, annealing and hot isostatic pressing (HIP). In particular, Ti-6Al-4V parts were fabricated in three different build orientations of X, Z, and $45^{\circ}$ to investigate the multi-directional mechanical properties. The results showed that fully densified Ti-6Al-4V parts with densities of up to 99.5% were obtained with optimized SLM parameters. The microstructure of stress relieved and mill annealed samples was dominated by fine ${\alpha}^{\prime}$ martensitic needles. After HIP treatment, the martensite structure was fully transformed into ${\alpha}$ and ${\beta}$ phases (${\alpha}+{\beta}$ lamellar). Within the realm of tensile properties, the yield and ultimate strength values were found statistically similar with respect to the built orientation for a given heat treatment. However, the ductility was found orientation dependent for the HIP samples, where a lower value was observed for samples built in the X direction.

• Applied Microscopy
• /
• 제50권
• /
• pp.18.1-18.7
• /
• 2020

The olfactory anatomy and histology of Lethenteron reissneri were researched using a stereo microscope, a light microscope, and a scanning electron microscope. As in other lampreys, it shows same characters as follows: i) a single olfactory organ, ii) a single tubular nostril, iii) a single olfactory chamber with gourd-like form, iv) a nasal valve, v) a nasopharyngeal pouch, vi) a sensory epithelium (SE) of continuous distribution, vii) a supporting cells with numerous long cilia, viii) an accessory olfactory organ. However, the description of a pseudostratified columnar layer in the SE and Non SE is a first record, not reported in sea lamprey Petromyzon marinus. In particular, both 19 to 20 lamellae in number and olfactory receptor neuron's quarter ciliary length of the knob diameter differ from those of P. marinus. From these results, it might be considered that the olfactory organ of L. reissneri shows well adaptive structure of a primitive fish to slow flowing water with gravel, pebbles, and sand and a hiding habit into sand bottom at daytime. The lamellar number and neuron's ciliary length may be a meaningful taxonomic character for the class Petromyzonida.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.1-12
• /
• 2016

이 연구는 슈크로오스디스테아레이트(Sucro-DS)를 사용하여 친수형 O/W 에멀젼을 만들고, 이 에멀젼의 드로플렛(droplet)은 다중층의 구조를 가지는 액정생성에 관한 것이다. Sucro-DS의 물리화학적 특성을 알아보았고, 이를 이용한 유화성능에 대하여 연구하였다. 액정을 형성하기 위하여 3wt%의 Sucro-DS, 5wt%의 글리세린, 5wt%의 수쿠알란, 5wt%의 카프릭/카프릴릭트리글리세라이드, 3wt%의 세토스테아릴알코올, 1wt%의 글리세릴모노스테아레이트, 78wt%의 정제수의 혼합계에서 안정한 다중층의 라멜라구조가 형성됨을 알 수 있었다. 이를 응용하여 불안정한 활성물질을 봉입한 크림을 만드는 방법에 대하여 기술하였다. 또한, 이 기술을 이용한 크림의 보습효과에 대하여 연구하였다. 인체 임상시험을 통한 피부개선효과에 대하여 연구한 결과를 보고한다. Sucro-DS 를 사용하여 안정한 액정상을 생성하는 pH 범위는 5.2~7.5 에서 안정한 액정구조를 유지하고 있었다. 액정의 안정성이 우수한 농도는 3wt%의 베헤닐알코올을 함유할 경우의 경도는 13kg/mm,min 이었다. 동일 함량의 점도는 25,000mPas/min 이었다. 유화제의 영향에 대하여 실험한 결과, Sucro-DS 의 농도는 5wt%가 적합하였고, 안정한 액정의 입경분포는 4~6mm 이었다. 이를 현미경분석을 통하여 관찰하였고, 3 개월동안 액정변화의 안정성은 $4^{\circ}C$, $25^{\circ}C$, $45^{\circ}C$에서 안정함을 알 수 있었다. 임상시험으로, 바르기 전의 보습력은 $13.4{\pm}7%$ 이었다. 액정이 형성되지 않은 크림의 보습력은 $14.5{\pm}5%$로 바르기 전보다는 약 8.2% 보습력이 상승하였다. 반면, 액정크림의 경우 $19.2{\pm}7%$로, 도포 전보다는 43.3%보습력이 상승하였다. 응용분야로 Sucro-DS 유화제를 사용한 액정크림, 로션, 아이크림 등 다양한 제형개발이 가능하고, 화장품산업은 물론 의약품산업 및 제약산업에서 피부외용제의 유화기술로 폭넓게 응용이 가능할 것으로 기대한다.

• 한국응용과학기술학회지
• /
• 제36권2호
• /
• pp.592-599
• /
• 2019

This study is to stabilize insoluble and unstable active ingredient which is Idebenone (INCI name: hydroxydecyl ubiquinone) in a multi-lamellar vesicle (MLV) and to stabilize it in the skin care cosmetics. Idebenone is good effective raw material in the treatment of Alzheimer's disease in the medical field and a powerful antioxidant in dermatology. It is well known as a substance that inhibits the formation of melanin and cleans the skin pigment. However, it did not dissolve in any solvent and it was difficult to apply in cosmetic applications. Niosome vesicle was able to develop a nano-particle by making a multi-layer of idebenone encapsulated with a nonionic surfactant, hydrogenated lecithin and glycine soja (soybean) sterols and passing it through a high pressure microfluidizer. Idebenone niosome vesicle (INV) has been developed to have the ability to dissolve transparently in water and to promote transdermal penetration. The appearance of the INV was a yellowish liquid having specific odor, and the particle size distribution of INV was about 10~80 nm. The pH was 5~8 (mean=6.8). This capsulation with idebenone was stored in a $45^{\circ}C$ incubator for 3 months and its stability was observed and quantitatively measured by HPLC. As a result, the stability of the sample encapsulated in the niosome vesicle (97.5%) was about 66.3% higher than that of the non-capsule sample of 32.5%. Idebenone 1% INV was used for the efficacy test and clinical trial evaluation as follows. The anti-oxidative activity of INV was 38.2%, which was superior to that of 12.8% tocopherol (control). The melanin-reducing effect of B16 melanoma cells was better than INV (17.4%) and Albutin (control) (9.6%). Pro-collagen synthesis rate was 128.2% for INV and 89.3% for tocopherol (control). The skin moisturizing effect was 15.5% better than the placebo sample. The elasticity effect was 9.7% better than the placebo sample. As an application field, INV containing 1% of idebenone is expected to be able to develop various functional cosmetic formulations such as skin toner, ampoule essence, cream, eye cream and sunblock cream. In addition, it is expected that this encapsulated material will be widely applicable to emulsifying agents for skin use in the pharmaceutical industry as well as the cosmetics industry.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.657-663
• /
• 2011

피페리딘 구조가 포함된 구조유도분자가 미치는 알루미노포스페이트 제올라이트 합성과 결정구조에 대한 영향을 조사하였다. 피페리딘 구조가 포함된 구조 유도분자는 피페리딘을 포함하여 2-메틸피페리딘, 2,6-디메틸피페리딘, 2,2,6,6-테트라메틸피페리딘을 사용하였다. 제올라이트 합성은 $1.0Al_2O_3:1.0P_2O_5:0.76SDA:45H_2O$의 조성으로 $170^{\circ}C$에서 7일동안 수열합성을 하였다. 피페리딘을 구조유도분자로 사용한 경우, 층상 구조가 형성되었으며 구조유도분자의 크기가 커질수록 AFI 구조의 AlPO-5가 형성되고 가장 큰 구조 유도분자를 이용한 경우, SAS 구조의 알루미노포스페이트가 형성됨을 리트벨트법으로 확인할 수 있었다. 또한 고체핵자기공명분석법의 결과로부터 미세 다공성 물질인 SAS 골격구조 내에 알루미늄과 인이 위치함을 알 수 있었다.