• 제목/요약/키워드: Lade's three-dimensional failure criterion

검색결과 4건 처리시간 0.017초

Lade의 3차원 파괴규준을 이용한 현무암의 전단강도 산정 (Estimation to Shear Strength of Basalt using Lade's Three-dimensional Failure Criterion)

  • 남정만;윤중만;송영석
    • 한국지반신소재학회논문집
    • /
    • 제9권3호
    • /
    • pp.19-27
    • /
    • 2010
  • 본 연구에서는 제주도 현무암에 대한 삼축압축시험을 실시하고 Lade(1977)의 3차원 파괴규준을 적용하여 강도정수를 산정하였다. 그리고 3차원 파괴규준에 의해 산정된 강도정수와 파괴면의 특성을 살펴보고, Mohr-Coulomb의 파괴규준으로 산정한 전단강도정수와 비교검토하였다. 삼축압축시험결과를 토대로 Lade(1977)의 3차원 파괴규준을 이용하여 파괴시의 ($I_1^3/I_3-27$)과 ($P_a/I_1$) 관계로부터 매개변수인 ${\eta}_1$ 및 m을 구하였다. 3차원 파괴면을 나타내는 정팔면체 평면에서 조면암질 현무암의 파괴면이 가장 크고 스코리아가 가장 작으며, 단면형상은 조면암질 현무암이 가장 삼각형에 가깝고 스코리아가 가장 원형에 가까운 것으로 나타났다. 정팔면체 평면에서 삼축실험결과와 Lade의 파괴포락선 및 Mohr-Coulomb의 파괴포락선을 비교한 결과 높은 응력하에서는 Lade의 파괴규준이 실험치와 일치하며, 낮은 응력하에서는 Mohr-Coulomb의 파괴규준이 실험치와 일치하는 것으로 나타났다. 그리고 Lade의 3차원 파괴면은 Mohr-Coulomb의 3차원 파괴면보다 크며, 이는 Lade의 파괴규준으로 산정된 전단강도정수가 Mohr-Coulomb의 파괴규준으로 구한 것 보다 더 크게 산정됨을 의미한다.

  • PDF

압상토의 3차원 거동 (Three-Dimensional Behavior of Granular Soil)

  • 정진섭
    • 한국농공학회지
    • /
    • 제37권2호
    • /
    • pp.64-72
    • /
    • 1995
  • A series of cubical triaxial tests with three independent principal stresses was per- formed on Baekma river sand( # 40~100). It was found that the major principal strain at failure remained approximately constant for b values larger than about 0.3 for both the drained and undrained condition, and thereafter increased as b value decreased. The test results showed that the direction of the strain increment at failure form acute angles with the failure surfaces for both the drained and undrained condition. The results were thus not in agreement with the normality condition from classic plasticity theory. Howev- er, it was found that the projections of the plastic strain increment vectors on the octahe- dral plane were perpendicular to the failure surface in that plane. Failure strength in terms of effective stress anlaysis was greatly influenced by the variation of intermediate principal stress and so was failure criterion. The effective stress failure surfaces for both the drained and undrained condition were estimated quite well by use of Lade's failure criterion.

  • PDF

압축성 모래의 3차원 전단강도 특성 (Three Dimensional Strength Characterisics of Compressible Sand)

  • 박병기;정진섭;임성철
    • 한국지반공학회지:지반
    • /
    • 제6권3호
    • /
    • pp.65-76
    • /
    • 1990
  • 압축성 모래의 3차원 전단강도 특성을 밝히기 위하여 육면체 시료로 성형하여 세 주응력을 각기 독립 적으로 조절하여 일련의 압밀배수 및 압밀비배수시험을 실시하였다. 그 결과 중간주응력은 파괴강도에 큰 영향을 미치고 있으며 파괴규준은 유효응력 해석을 할 경우 중간주덕력의 영향을 받고있다. 측정된 유효내부마찰각은 중간주응력의 상대적 크기를 나타내는 계수 b(=(o2-o3)/(o1-o3)값이 0인 삼축압축상태에서 최소치가 되고 점진적으로 b값의 증가와 더불어 담가하며 배수, 비배수시험 결과를 동-정팔면체면에 투영하여 얻은 응력으로 조정된 유효내부마찰각은 같은 b값에서 서로 일치하고 있다. 비배수시험에 있어서 전응력으로 해석한 결과는 Tresca의 파괴규준과 잘 일치하고 있다. 정팔면체면에 유효응력으로 표시된 파양면은 배수, 비배수시험결과가 같은 값을 가지고 Lade의 파양규준에 근접함을 보여준다.

  • PDF

입방체형 삼축시험에 의한 다짐화강토의 전단강도 특성 (Strength Characteristics of Decomposed Granite Soil in Cubical Triaxial Test)

  • 정진섭;김찬기;박승해;김기황
    • 한국농공학회지
    • /
    • 제38권6호
    • /
    • pp.64-73
    • /
    • 1996
  • The three-dimensional strength behavior of compacted decomposed granite soil was studied using cubical triaxial tests with independent control of the three principal stresses. All specimens were loaded under conditions of principal stress direction fixed and aligned with the directions of compacted plane. For comparable test conditions, the major principal strain and volume strain to failure were smallest when the major principal stress acted perpendicular to the compacted plane. The opposite extremes were obtained when the major principal stress acted parallel to the compacted plane. In cubical triaxial tests with same b values and with ${\theta}$ values in one of three sectors of the octahedral plane, independent of the range of ${\theta}$, higher friction angles are obtained in tests with b greater than in triaxial compression tests in which b 0.0, Comparison between the results of the drained cubical triaxial tests on lksan compacted decomposed granite soil and the cross section of the Mohr-Coulomb failure surface as well as the cross section of the Mohr-Coulomb failure surface were made. Lade's isotropic failure criterion based on vertical specimens overestimates the strengths for tests performed with values of 0 between 90˚ and 1 50˚ the Mohr-Coulomb criterion generally underestimates the strengths of tests performed with values of ${\theta}$ between $0^{\circ}$ and $180^{\circ}$ except around the $120^{\circ}$.

  • PDF