• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.102-103
• /
• 2018

Recentely as high-rise buildings have been constructed, methods of managing concrete conveying pipes and preventing pipes from being blocked are important. The current methods determined by labors' experiences are not accurate and not efficient. The pipes vibrated and vibration frequencies were analyzed. The results obtained in this study showed that difference of the left concrete volume in pipes causes contrast of amplitude. Therefore, this study suggests that a prediction system can manage pipes by using vibration frequencies.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.119-120
• /
• 2015

Appropriate management of the finish works in construction project is one of most important activities that must be conducted considering the total duration of the project. Masonry work is a fundamental process that is performed in the preliminary steps of finish works. However, it has been investigated that the analysis of delay factors affecting masonry work has been neglected in the domestic construction site. Therefore, this study deducts delay factors affecting masonry work by literature review and survey on site engineers and labors. This study has been conducted as a preliminary step of developing a construction project interference management system which is expected to suggest objective information for the decision making in construction sites.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.99-105
• /
• 2010

This study was performed to solve the breaking problem in the fine blanking(FB) process of sector gears for car seat recliner using nickel chrome molybdenum steel(SNCM220) plate. The optimal design of embossing circle is changed to oval with labors' experiences and finite element analysis. The maximum principal stress and effective strain in a forming process are analyzed by commercial finite element software to solve the problems in embossing stage of FB process. As a result of FE analysis, the maximum principal stress in forming is lower than yield point of material. It is shown from experiments in the modified die that the formed gear does not break in embossing stage.

• 한국가정과학회지
• /
• 제3권2호
• /
• pp.47-57
• /
• 2000

We study on the housewives'social contribution through their household labor. By the method of literature review, we discuss about the housewives'social roles, their negative problems and the private and public efforts to solve the problems, and ultimate direction to the solutions. We find their four roles-Invisible labors In this capitalist society. consumers without any sovereignty, substitutes for incomplete social welfare system and agents to develop and sustain the social network. A few solutions which they have found out or the Korean society has devised are not enough. The utmost and ultimate solutions should include the housewives'autonomy. subjectivity and community.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.160-161
• /
• 2013

Progress measurement is one of key tasks for cost and schedule management in construction management. However, there has been shortage of effort to implement for automated progress measurement. This paper proposes to use a face recognition (FR) technology for automated progress measurement and management in construction sites. The FR technology can acquire detailed progress data that includes the in and out information of labors by location. The expected effectiveness of the proposed system is to provide accurate labor information for progress measurement by utilizing automated data acquisition technology (DAT) with high-speed reading face. In addition, it could be applied to real-time safety and quality management by using the camera images.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.130-135
• /
• 2001

In this study, I have researched into the causes of defects in apartment house, The results of this study are listed below. (1) Water leakages which result from land sinking and cracks, results of misuse of back filling method, are the main reason of defects in civil engineering work and architectural work. (2) Inexperience and unwillingness are the main reason of defects in plaster work. (3) In windows work and painting work, the main reasons are lacks of precision construction and efflorescence resulting from outdoor air, respectively. (4) Defects in waterproofing work and electric work result from fault construction by low unit Costs. (5) Equipment work requires uses of standardized construction materials and management, and landscape architecture work requires minimizing human mistakes, for instance, degin carelessness. For the reasons stated above, the causes of defects in apartment house are insufficient construction labors, inferior construction materials, urgent construction process time, and conscientiousless industrialists who only seek after a profit margin.

• 한국실내디자인학회논문집
• /
• 제9호
• /
• pp.10-17
• /
• 1996

With the ever-increasing important of high-speed information in society as we move towards the 21 st century. Interior design and it's working condition has been changed a great deal included a sort of each special character and make a difference against the others. It used to be find a great poles asunder of worker's safety and project quality according to the environmental dimension of interior construction field as if they should be a pleasantness or poor condition. This research aimed to improvement of environmental construction field of interior with construction engineers and particular interior labors in 4 phases as : ⅠThe preparatory phase : -Secure a Budget, Environmental safety supervisor -Fix of Design quality, Construction period. -Choice of Construction method, Sub constructing Ⅱ. Starting work phase ; -Capacity , Safety of temporary power line. -Carriage, Stock of Material -Safety of Electronic tools, -Personal protector. Ⅲ. Working period ; -Ventilation, I illumination of working place. -Measurement of environmental working condition Ⅳ.Finish working phase ; -Analysis of measurement data. -Evaluation and making up for the weak point. -Keeping data.

• 한국멀티미디어학회논문지
• /
• 제24권10호
• /
• pp.1358-1368
• /
• 2021

A research on agricultural automation is a main issues to overcome the shortage of labor in Korea. A sweet persimmon farmers need much time and labors for classifying profitable sweet persimmon and ill profitable products. In this paper, we propose a mixed two-step synthetic neural network model for efficiently classifying sweet persimmon images. In this model, we suggested a surface direction classification model and a quality screening model which constructed from image data sets. Also we studied Class Activation Mapping(CAM) for visualization to easily inspect the quality of the classified products. The proposed mixed two-step model showed high performance compared to the simple binary classification model and the multi-class classification model, and it was possible to easily identify the weak parts of the classification in a dataset.

• 식품과학과 산업
• /
• 제53권4호
• /
• pp.422-434
• /
• 2020

Commercial kimchi was produced 467 thousand tons in Korea at 2018 year. One thousand factories and 15 thousand labors were working for the production of kimchi. Seven hundred thousand tons of raw materials was used for the production of commercial kimchi, and 96.8% of them was supplied at domestic market. Automatic kimchi processing equipments was developed and used for the productivity improvement. In Korea, 1,991 thousand tons of kimchi was consumpted and 717 thousand tons of them was supplied by commercial products, and 291 thousand tons of them was imported from China. Thirty thousand tons was exported to Japan, USA, Hong Kong, Taiwan and Australia.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.41-49
• /
• 2007

GS E&C had developed construction management system, PMS which is based on EVMS in 1997. Recently, TPMS has developed for effective construction management through applying daily schedule management and JIT on materials, labors, equipments focusing field work. TPMS realizes "Shielding" and "Make-Ready Process" which are the main concept of Lean construction. Through this system, it can manage and plan daily field work, support the field work related material, labor, and equipment planning, and minimizes the non-valuable process. This paper introduces the concept of TPMS, and through established system, it can lead the construction culture and raise the competitive power of construction industry