• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.118-130
• /
• 2017

During the landscape design process, landscape architects produce various forms of drawings to visualize the future designed landscape. This work thoroughly examines the process of the utilization of James Corner's theory and practice of representation. Since the early 1990s, Corner has explored the characteristics and functions of landscape architectural drawing theoretically. Specifically, Corner argued that the use of visual representation makes it difficult to achieve the full embodiment of all of the multisensory characteristics of a landscape. Thus, he explored new drawing techniques that alternatively visualize the landscape and generate creative ideas(i.e., imagination of drawing), rather than a realistic illustration of not-yet-actualized landscapes(i.e., instrumentality of drawing). Corner's theory has evolved throughout the mid and late-1990s as applied to landscape practice. Corner embraced ecology and implemented the theory and practice of Landscape Urbanism, thereby once again emphasizing the instrumentality of drawing. Whereas the early theory mainly explored a perspective view using collage and montage, Corner later began to stress the importance of the instrumentality again. For example, Corner employed a mapping technique based on the instrumental map and that simultaneously creatively transforms it. Corner's theory and practice of representation fully explored the identity of landscape architectural drawings and reflected the interaction between theory and practice. Thus, his design and theoretical works continue to have significant influence on present landscape practice and theory.

• Composites Research
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2011

Low-velocity impact can cause various damages which are mostly hidden inside the laminates or occur in the opposite side. Thus, these damages cannot be easily detected by visual inspection or conventional NDT systems. And if they occurred between the scheduled NDT periods, the possibilities of extensive damages or structural failure can be higher. Due to these reasons, the built-in NDT systems such as real-time impact monitoring system are required in the near future. In this paper, we studied the impact monitoring system consist of impact location detection and damage assessment techniques for composite flat and stiffened panel. In order to acquire the impact-induced acoustic signals, four multiplexed FBG sensors and high-speed FBG interrogator were used. And for development of the impact and damage occurrence detections, the neural networks and wavelet transforms were adopted. Finally, these algorithms were embodied using MATLAB and LabVIEW software for the user-friendly interface.

• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.127-136
• /
• 2010

Emerging technologies such as four-dimensional computed tomography (4D CT) is expected to allow clinicians to accurately model interfractional motion and to quantitatively estimate internal target volumes (ITVs) for radiation therapy involving moving targets. A need exists for a 4D radiation therapy quality assurance (QA) device that can incorporate and analyze the patient specific intrafractional motion as it relate to dose delivery and respiratory gating. We built a 4D RT prototype device and analyzed the patient-specific 4D radiation therapy QA for 2D dose distributions successfully. With more improvements, the 4D RT QA prototype device could be an integral part of a 4D RT decision process to confirm the dose delivery.

• Journal of Trauma and Injury
• /
• v.26 no.3
• /
• pp.163-169
• /
• 2013

Purpose: This study was conducted to confirm the anatomic conformity of the new periarticular locking plates designed by Zimmer on Korean adult bones and to identify the structures at risk during the application of these implants. Methods: The study was performed on the humerus, radius, and tibia of 10 adult cadavers(6 males and 4 females) procured from the cadaveric lab of our hospital. Anteroposterior (AP) and lateral X-rays were taken to confirm that the cadavers were free of any unusual lesions or anatomic variations. We used the 3.5-mm proximal humerus plate, 2.7-mm distal radius plate, 3.5- and 5.0-mm proximal tibia plates, and 3.5-mm distal tibia plate developed by Zimmer, Inc. (Zimmer periarticular locking plate). The longest plate from each group was used to confirm anatomical conformity. Standard approaches were used for each area, and soft tissue was retracted in order to pass the plate beneath the muscle. The position of the plate was confirmed using standard AP and lateral view X-rays. After this procedure had been completed, the region was dissected along the length of the implant to determine the conformity of the implant to bone and the penetrations of screws into the articular surface or violations of any vital structures, such as nerves, blood vessels, or tendons. Results: Excellent anatomical conformity was observed with Zimmer periarticular locking plates for Korean adults. The tibial nerve and the posterior tibial artery were found to be structures at risk when applying a distal tibial plate. Conclusion: Additional posterolateral fixation is recommended when dealing with cases of tibial plateau fracture when the fracture line extends to the posterolateral cortex. We recommend taking proper views using 10~15 degrees of internal rotation to ensure correct screw length and, thus, avoid penetration of vital structures and tendons.

• Korean Journal of Food Science and Technology
• /
• v.15 no.4
• /
• pp.385-391
• /
• 1983

The change of free amino acid contents and nitrogen compounds in the course of the Chungkookjang fermentation that occurred by utilizing Bacillus natto and Bacillus subtilis are to the following effects. pH, during the growth period, that is 6.35 in pH at the first stage of fermentation, were turned into 8.2 after 72 hours. Crude protein content increased irregularly from 16.82%-18% and total sugar decreased. Increasing with the progress of fermentation time, protease activity showed the maximum value between 48-60 hours, but Bacillus natto activated a little than Bacillus subtilis. Amino nitrogen and water soluble nitrogen content increased but difference was found that is, Bacillus natto increased more than Bacillus subtilis. Glutamic acid content was the highest among the contents of free amino acid between both Bacillus sp. and the order of the next contents showed as leucine, phenylalanine, histidine alanine. arginine, but difference was found between Bacillus sp., that is, Bacillus natto was higher than Bacillus subtilis. In view of the results as above, Bacillus natto was excellent than Bacillus subtillus as Bacillus strains of Chungkookjang koji production.

• Journal of Service Research and Studies
• /
• v.8 no.1
• /
• pp.89-102
• /
• 2018

The Industrial Classification is a systematic taxonomy of industrial activities and the Standard Industrial Classification is used in all country by their own a consistent classification method. Therefore, it is employed to analyze current status of industry affairs using statistical investigations in terms industrial activities for making industrial policies and to compare industrial activity among countries. Since the Second Industrial Revolution, the need for the homogenous standard of industrial classification among countries emerged as the economic and industrial exchanges between the countries have became more active. In 1940, Colin Clark who british economist divided the industry into the first (primitive), second (processed), and third (service) industries. Based on this, the United Nations Office for Statistics (UNSD) established International Standard Industry Classification (ISIC) in 1948, which most countries invoke it. ISIC(International Standard Industry Classification) and the standard industry classifications of countries have reached the present after several revisions since the enactment of the Act. In the 2000s, the standard industry classification is amended to reflect the emergence of new industries and changes in industrial structure, mainly featuring the creation and segmentation of sections in the tertiary industry domains. It also shows that primary and secondary sectors are shifting to tertiary industry. In this study, the causes of these common phenomena are systematically identified and the problems present classification systems have been analyzed. Also proposed is the direction of formation of the industrial classification system from a service economy point of view and the conceptual model of the new classification system. In the future, it is necessary to validate the proposed model through this study and to carry out various new classification system studies.

• Korean Journal of Acupuncture
• /
• v.22 no.4
• /
• pp.9-27
• /
• 2005

Objective : hypothesis. First of all, there exists electric property in meridian and meridian point. Second of all, energy flowing in meridian is related with electric property. Third of all, there is electronic interaction between the operator who performs acupuncture therapy and the receiver who is given acupuncture therapy. Forth of all, acupuncture effects may depend on the electric capacity which is transferred between the operator and the receiver via acupuncture needle. Methods : Under the hypothesis, I studied the effects of electric charge in ST37(+) and ST39(-) generated by Apchim (押鍼) manipulation which was stimulated at ST36 point. And compared with data on the changes of electric charge from the hand of the operator during acupuncture stimulation. Electric charge induced via acupuncture needle from the operator may be important factor that causes the changes of electric charge in meridian and acupoint in the receiver. Therefore we investigated the changes of electric charge induced by the operator using Maclab 400 by the following methods. The one was in stable electric circle condition and the other was in unstable electric circle condition. In this experiments, the changes of electric charge from the stimulation type of Apchim manipulation performed in our lab condition in acupuncture therapy was induced at least three factor, one was the difference of bio-potentials between the operator and the receiver of acupuncture therapy, another was the depth of acupuncture insertion from the skin of the receiver the other was an electromyogram of the receiver. Results :The data imply that the first factor should make a capacitance current when the operator touched the acupuncture needle which was inserted in the receiver. Therefore, the results suggest that capacitance currents stimulus in electronic view may be important factor in acupuncture therapy between the operator and the receiver of acupuncture therapy.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.85-95
• /
• 2005

The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle during One Hand Backhand Stroke and Two Hand Backhand in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head direction were defined. 1. In three dimensional maximum linear velocity of racket head the X axis and Y axis(horizontal direction) showed $-11.04{\pm}2.69m/sec$, $-9.31{\pm}0.49m/sec$ before impact, the z axis(vertical direction) maximum linear velocity of racket head did not show at impact but after impact this will resulted influence upon hitting ball. It could be suggest that Y axis velocity of racket head influence on ball direction and z axis velocity influence on ball spin after impact. The stance distance between right foot and left foot was mean $75.4{\pm}5.86cm$ during one hand backhand stroke and $72.6{\pm}4.67cm$ during two hand backhand stroke. 2. The three dimensional anatomical angular displacement of trunk in interna rotation-external rotation showed most important role in backhand stroke. and is follwed by flexion-extension. the three dimensional anatomical angular displacement of trunk did not show significant difference between one hand backhand stroke and two hand backhand stroke but the three dimensional anatomical angular displacement of trunk was bigger than one hand backhand stroke. 3. while backhand stroke, the flexion-extension and adduction-abduction of right shoulder joint showed significant different between one hand backhand stroke and two hand backhand stroke. the three dimensional anatomical angular displacement of right shoulder joint showed more flex and abduct in one hand backhand stroke. 4. The three dimensional anatomical angular displacement of left shoulder showed flexion, adduction, and external rotation at impact. after impact, The angular displacement as adduction-abduction of left shoulder changed motion direction as abduction. angular displacement of left shoulder as flexion-extension showed bigger than the right shoulder.

• Bulletin of the Korean Space Science Society
• /
• 2007.10a
• /
• pp.139-143
• /
• 2007

Electric propulsion has become a cost effective and sound engineering solution for many space applications. The success of SMART-1 and MUSES-C developed by European Space Agency (ESA) and Japan Aerospace Exploration Agency (JAXA) each proved that even small spacecraft could accomplish planetary mission with electric propulsion systems. A small electric propulsion system which is Hall effect thruster like SMART-1 is under development by SaTReC and GDPL (Glow Discharge Plasma Lab.) in KAIST for the next microsatellite, STSAT-3. To achieve optimized propulsion system, it is very necessary to understand plasma motions of Hall effect thruster. In this paper, we try to approach comprehensive plasma model with the particle simulation complementary to Particle In Cell (PIC) simulation. We think these two different approaches will help experimenters to optimize Hall effect thruster performances.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.3
• /
• pp.149-158
• /
• 2005

This paper describes design, fabrication, and application of the silicon based temperature controllable micro reactor. In order to achieve fast temperature variation and low energy consumption, reaction chamber of the micro reactor was thermally isolated by etching the highly conductive silicon around the reaction chamber. Compared with the model not having thermally isolated structure, the thermally isolated micro reactor showed enhanced thermal performances such as fast temperature variation and low energy consumption. The performance enhancements of the micro reactor due to etched holes were verified by thermal experiment and numerical analysis. Regarding to 42 percents reduction of the thermal mass achieved by the etched holes, approximately 4 times faster thermal variation and 5 times smaller energy consumption were acquired. The total size of the fabricated micro reactor was $37{\times}30{\times}1mm^{3}$. Microchannel and reaction chamber were formed on the silicon substrate. The openings of channel and chamber were covered by the glass substrate. The Pt electrodes for heater and sensor are fabricated on the backside of silicon substrate below the reaction chamber. The dimension of channel cross section was $200{\times}100{\mu}m^{2}$. The volume of reaction chamber was $4{\mu}l$. The temperature of the micro reactor was controlled and measured simultaneously with NI DAQ PCI-MIO-16E-l board and LabVIEW program. Finally, the fabricated micro reactor and the temperature control system were applied to the thermal denaturation and the trypsin digestion of protein. BSA(bovine serum albumin) was chosen for the test sample. It was successfully shown that BSA was successfully denatured at $75^{\circ}C$ for 1 min and digested by trypsin at $37^{\circ}C$ for 10 min.