• 대한조선학회논문집
• /
• 제47권5호
• /
• pp.681-688
• /
• 2010

During certification of freefall lifeboats, it is necessary to estimate the injury potential of the impact loads exerted on the occupants during water entry. This paper focused on the numerical simulation to predict the acceleration response during the impact of freefall lifeboats on the water using FSI(Fluid-Structure Interaction) analysis technique of LS-DYNA code. FSI problems could be conveniently simulated by the overlapping capability using Arbitrary Lagrangian Eulerian(ALE) formulation and Euler-Lagrange coupling algorithm of LS-DYNA code. Through this study, it could be found that simulation results were in relatively good agreement with experimental ones in the acceleration peak values, and that the loading conditions were very sensitive to the acceleration responses by the experimental and simulation results.

• 한국전산구조공학회논문집
• /
• 제18권1호
• /
• pp.43-49
• /
• 2005

방사선물질을 수송하기 위한 용기는 가상 사고조건에서도 안전해야만 한다. 운반용기 설계요구조건은 실험 및 유한요소 해석을 통해 구조적 건전성을 확보하여야 한다. 최근에는 실험보다 유한요소해석을 이용한 방법이 상대적으로 비용이 적기 때문에 주로 사용된다. 그러나 기계적인 반응이 복잡하기 때문에 프로그램을 적용하는 사용자의 방법에 의해 결과가 결정되고 해석하는 동안 여러가지 문제를 발생시킬 수 있다. 본 논문에서, 유한요소해석은 LS-DYNA3D와 ABAQUS/Explicit을 이용하여 운반용기의 9m 자유낙하충격실험에 대한 해석기술과 여러가지 손상을 갖는 경우를 발견하기 위해 연구하였다. 운반용기의 각각의 경우를 비교하고 사용후 핵연료 운반용기의 낙하 실험에 대해서 신뢰할 수 있는 비교적 간단한 해석 기술을 제안하였다.

• 화약ㆍ발파
• /
• 제35권1호
• /
• pp.27-33
• /
• 2017

본 연구에서는 상용 해석코드인 LS-DYNA 상에서 선택된 금속과 암석을 대상으로 파괴인성시험 과정을 모델링하였다. 이 시험은 각봉의 3점 휨 시험을 토대로 한 것이다. 이 시험을 수행하는 데에는 비교적 긴 시간이 소요되므로 해석과정에서는 Newmark 법을 사용하는 묵시적 해석법을 채택하였다. 본 해석을 통해 얻은 응력확대계수의 값은 금속과 암석의 경우에 각기 $73MPa.m^{0.5}$과 $0.3MPa.m^{0.5}$이었다. 암석 재료모델의 파괴인성 값이 이렇게 작게 나타난 것은 작성된 재료모델이 암석의 특징적인 성질인 취성을 잘 표현하고 있다는 의미이다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.573-578
• /
• 2008

Finite element analysis of impact response of a motorcycle helmet is presented in this paper. The finite element LS-DYNA3D code is used to simulate the impact response of the helmet including of plastic shell, foam liner, and magnesium headform. Since the maximum accelerations at center of gravity of the headform obtained by numerical analysis and experiment agree well, the numerical simulation is proved to be valid.

• 한국해양공학회지
• /
• 제13권4호통권35호
• /
• pp.75-81
• /
• 1999

Roll forming process is simulated with a commercial FEM code LS-DYNA. The rolls are treated as rigid bodies rotating with a constant angular velocity. The strip and the rolls are modeled with 4-node plate elements. It is assumed that the nodes along the front end of the strip move along paths given by sine functions. It is found that the analysis can be applied to the optimal design of forming rolls. With these analyses, it is expected that forming defects can be avoided and process development efforts can be reduced.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.451-456
• /
• 2007

A finite element analysis and experiment study of a motorcycle helmet are presented in this paper. The finite element LS-DYNA3D code is used to analyze the helmet. The test specimen, instruments, and setup procedures are described. Since the displacements and Von-Mises stresses obtained by numerical analysis and experiment agree well, the numerical simulation is proved to be valid.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권3호
• /
• pp.221-226
• /
• 2010

The failure of a Kevlar29/Phenolic composite plate under high-velocity impact from an fragment simulation projectile was investigated using the nonlinear explicit finite element code, LS-DYNA. The composite laminate and the impactor were idealized by solid elements, and the interface between the laminas was modeled as a tiebreak type in LS-DYNA. The interaction between the impactor and laminate was simulated using a surface-to-surface eroding contact algorithm. When the stress level meets the given failure criteria, the layer in the element is eroded. Numerical results were verified through existing test results and showed good agreement.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.933-940
• /
• 2010

A numerical analysis for the space frame structure under ballistic and blast loads was performed using LS-DYNA, a commercial code. The space frame structure was developed to be adapted to the ground vehicle in the future and it was designed to build with Al7039 frames and lightweight multi-layered panels for the purpose of weight reduction and shock mitigation. The analyses have done for side impacts by a cylindrical projectile and Comp. C-4 explosive representing major threats to the vehicle. The deformed shape of the panel section and stresses as well as accelerations of the frames calculated from LS-DYNA were compared to the test results to validate the analysis model. The internal energies for panels and frames from LS-DYNA were also compared to each other to discern their role in absorbing the ballistic and blast impact.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.65-73
• /
• 2013

PURPOSES: This paper presents the results of computer simulations of roadside safety barrier, called by safety roller guardrail, consisting of rotational roller, rotation control plate, post and subsidiary members. The rotation roller and rotation control plate are made by EVA(ethylene vinyl acetate), and PE(polyester), respectively. METHODS: The occupant risk analysis has been carried out under vehicle crash condition for high containment level of SB-4 for the purpose of local road. Simulations are performed with the finite element code LS/DYNA-3D. RESULTS: The numerical results obtained by LS/DYNA-3D software from the viewpoints of vehicle stability, vehicle trajectory, occupant risk, etc. CONCLUSIONS: It is noted that not only impact severity is drastically reduced but also vehicle trajectory is improved due to the characteristics of energy absorption and rotation pattern of EVA rollers connected by control plates.

• 전산구조공학
• /
• 제29권4호
• /
• pp.4-8
• /
• 2016