• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.2058-2064
• /
• 2008

This study is concerned with the quantitative Quality of Service(QoS) of the Light Railway Transit(LRT) System. Generally, the QoS offered to passengers by the Operator of LRT system can be quantified in various ways. In this paper, we assumed that the QoS is a combination of both Train Delivery and Train Punctuality under considering LRT characteristics including core sub-systems such as, rolling stock, signalling, power-supply and PSD(platform screen door), etc. We also, provide a quantitative analysis method to evaluate the QoS related the reliability of LRT system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.395-400
• /
• 2007

LRT(Light Railway Train), which is a intermediate system of train and bus, is arose for the solution of subway construction cost and the transportation capacity of bus. LRT was introduced in 1980's. About 30 local governments are plan to introduce LRT or constructing LRT, at present. AGT(Automated Guide-way Transit) system, which is a kind of LRT, is operated without driver. Rubber wheeled AGT system can reduce the noise and vibration compare to steel wheeled AGT, so it is estimated as ideal transportation system for urban area. And live loads at bridge are classified as the static load of vehicle and the dynamic wheel contact load which is occurred from the interaction of bridge and vehicle vibration, and the surface roughness. In the case of AGT system, the dynamic increment factor of bridge is greater than the normal train bridge and roadway bridge, because, the weight of AGT vehicle is more light that the train of truck. The exact method for dynamic increment factor is experiment. But this method is needed much money and time, moreover, this method cannot be adopted in design. Therefore, a simulation program for the interaction of AGT bridge, vehicle and surface roughness was developed, in this study. And the program was verified by experiment. As a result, the accuracy of the simulation program can be verified.

• 한국철도학회논문집
• /
• 제6권1호
• /
• pp.49-57
• /
• 2003

This paper proposes the Train Control System for the LRT(light rail transit). With regard to information processing in car, we build a computer network in the car, turned the hardware required for train control into software, and developed the Train Control Monitoring System(TCMS) and ATC. Drive Type of Train control system car can drive with Driverless mode basically, and this paper applied 10Mbps special communication type for car control, data analysis, The propulsion efforts and breaking effort can control the cars. It is used Vector Control in Propulsion control and proposed Operating pattern for Propulsion control thinking Operating data of Rubber Tire LRT.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.528-533
• /
• 2002

This paper proposes the Train Control Monitoring System (TCMS) for the LRT(light rail transit). With regard to information processing in car, we build a computer network in the car, turned the hardware required for train control into software, and developed the Train Control Monitoring System.

• 한국철도학회논문집
• /
• 제15권6호
• /
• pp.609-615
• /
• 2012

무인운전 경전철 운전계획을 위해 수동운전 기반의 TPS(Train Performance Simulation) 대신에 ATO(Automatic Train Operation) 자동운전에 기반한 TPS가 요구된다. 본 논문은 ATO 패턴을 사용하는 새로운 TPS 모델을 제시하고, 서울지하철 6호선의 시험구간과 부산-김해 경전철 전체 노선의 실제 자동운전 운행결과와 시뮬레이션 결과를 비교하였다. 실제와 유사한 ATO 운행패턴은 상용감속도, 저크, 역정차감속도, 구배환산거리의 4가지 파라미터를 도입한 새로운 TPS 모델에 의하여 매우 정밀하게 시뮬레이션 될 수 있다. 무인 자동운전을 위한 상업운전용 표정시분은 ATO기반 TPS의 "Fast" 운전모드 운행시간에 경전철 표준사양에 따라 km당 3초의 여유를 가지도록 본 논문에서 제시된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.111-118
• /
• 2000

This paper proposes the track layout criterion for the LRT(light rail transit). All criterions established concerning dimension and performance of LRT vehicles that are three types. Types of vehices are AGT(automated guided train) steel wheel. AGT rubber tire and LIM(linear induction motor). Using theoritical approach, adaptation and validity of criterions are verified. Proposed criterions may provide a standard scheme for design and construction of the infrastructure on LRT.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.98-103
• /
• 2003

Recently, to solve the urban transportation problem, the introduction of Light Rail Transit system has been proceeded positively. therefore, development of the Korean standard LRT system in which safety, efficiency and cost effectiveness are emphasized. The Korea Railroad Research institute study on Rubber Tired AGT system of Light Rail Transit to obtain the essential technology and engineering know-how, which leads lower LRT construction cost. In the development procedure, SE(system Engineering) is needed for combination of subsystem and optimum operation effect. This study is focused on the interface of LRT subsystem(Development of the rubber tired LRT, Power supply system, signalling and train control system, Elevated track structure for the rubber tired LRT), a important part of SE, to develop of the driverless LRT system and establish the test and evaluation.

• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.22-28
• /
• 2007

During the passage of the train, the railway bridge undergoes vibration and noise. The noise of railway bridge can be occurred from various sources. The wheel-rail contact, noise from machinery parts, structural-borne noise, pantagraph noise and aerodynamic noise of the train work in combination. Running train is one of the most important factors for railway bridge vibration. The repeated forces with equidistant axles cause the magnification of dynamic responses which relates with maintenance of the track structure and structure-borne noises. The noise problem is one of the most important issues in services of light rail transit system which usually passes through towns. In the present study, The vibration and noise of the LRT bridge will be investigated with utilizing dynamics responses from moving train as input data for noise analysis.

• 한국시뮬레이션학회논문지
• /
• 제20권1호
• /
• pp.9-18
• /
• 2011

저탄소 녹색성장의 시대를 맞아 철도 교통의 중요성이 강조되고 있다. 하지만 차량기지 시뮬레이션에 대한 연구는 부족한편이다. 본 논문은 경량전철(LRT:Light Rail Transit) 차량기지에 대한 동적 시뮬레이터 개발에 관한 논문이다. 시뮬레이션툴에 대한 요구사항 분석, 시뮬레이션 툴 아키텍처, 데이터베이스 설계, 시뮬레이션 알고리즘, 시뮬레이션 툴 설계 및 개발에 대해 설명하고 있다. 경량전철 차량기지 동적 시뮬레이터는 선로정보, 열차정보, 신호 및 분기기 정보, 열차작업정보, 역사정보 등을 편집하는 네트워크 편집기와 열차주행 알고리즘을 연산하는 시뮬레이터, 시뮬레이션 결과를 표 및 그래프로 조회하는 리포터와 시뮬레이션 결과를 동적으로 애니메이션을 통해 확인할 수 있는 애니메이터의 4가지 모듈로 구성되어 있다. 경량전철 차량기지 동적 시뮬레이터에 대한 구조 및 설계, 개발에 대한 전반적인 내용을 다룬 본 연구는 시뮬레이터를 새로 개발하는 경우 좋은 참고자료로 활용될 수 있을 것으로 보인다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.953-957
• /
• 2005

Light Rail Transit(LRT) Systems with transport capacity between subway and bus(5,000-25,000 persons per hour) are being carried on over 100 lines around the world. In Korea, to solve the urban transportation problem, the introduction of LRT system has been proceeded positively. It is planned to develop the Korean standard LRT system in which safety, efficiency and cost effectiveness are emphasized. So we were able to make proto type of Rubber tired AGT system for LRT. This is capable of driverless operation using CBTC(Communication Based Train Control) of Moving Block System and is currently making an experiment for reliability in test-line. This study is focused on verifving the train tracking with CBTC in driverless and ATO mode through implementing the examination.