• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.81-86
• /
• 2019

Although the localization rate of shipbuilding and marine equipment goods is set to be 70 percent by 2020, but the localization rate of equipment and materials for shipbuilding and marine facilities is currently 10 to 30 percent. For Korea's Big 3 shipbuilders, which build 70 percent of the world's largest shipbuilders, localization of shipbuilding equipment and equipment is an essential factor. In particular, there is a growing need to localize equipment and materials in terms of the number of lead standards and A/S. It is expected that there will be a rapid expansion of LNG carriers in the future, and it is necessary to develop equipment and equipment materials of LNG ships. In this study, the design and manufacture of LNG vessel equipment was conducted. Design and basic performance tests of 4-inch QCDC for LNG bunkering were conducted.

• 한국산업융합학회 논문집
• /
• 제26권2_2호
• /
• pp.315-325
• /
• 2023

Recently, various dynamic risk analysis methods have been suggested for estimating the risk index by predicting the possibility of accidents and damage. It is necessary to maintain and support the safety system for responding to accidents by continuously updating the probability of accidents and the results of accidents, which are quantitative standards of ship risk. In this study, when a LNG leakage that may occur in the LN G Fuel Gas Supply System (FGSS) room during LN G bunkering operation, a reliability physical model was prepared by the change in monitoring data as physical parameters to estimate the accident probability. The scenario in which LNG leakage occur were configured with FT (Fault Tree), and the coefficient of the covariate model and Weibull distribution was estimated based on the monitoring data. The possibility of an LNG leakage, which is the top event of FT, was confirmed by changes in time and monitoring data. A method for estimating the LNG leakage based on the reliability physical analysis is proposed, which supports fast decision-making by identifying the potential LNG leakage at the accident.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 춘계학술대회
• /
• pp.162-163
• /
• 2018

해양환경 및 배출가스 규제로 지금까지와는 다른 새로운 연료공급시스템을 적용하게 되는 LNG 추진 선박의 경우 초기 설계 단계에서 위해도 평가가 수행된다. 위해도 평가는 위험에 대한 분석과 평가를 체계적으로 가능하게 하는 일련의 논리적인 단계이다. LNG 연료추진선박은 크게 LNG Tank, Fuel Gas Supply System, Bunkering Manifold, LNG Engine으로 구성되며 이는 해당 선박의 특성, 크기, 항로, 운항거리, 사용엔진 등에 따라 구성요소가 달라지므로 각각의 선박에 대한 위험 요소가 달라지며, 위해도 분석 또한 달라진다. 본 연구에서는 LNG를 연료로 하는 선박들의 시스템에 대해 고찰하고, 실제 위험도 평가가 진행된 몇 가지 사례 선박들의 위해도 평가에 대한 분석을 하고자 한다.

• 한국항만경제학회지
• /
• 제30권4호
• /
• pp.69-89
• /
• 2014

국제 환경규제의 강화 등으로 항만의 경영수지는 지속적으로 악화되고 있으며, 이에 대비한 항만 분야의 대응이 중요시되고 있다. 국제해사기구(IMO)는 선박 및 해양 분야의 환경규제를 강화하고있는 실정이다. 발틱해를 시작으로 배출통제지역(ECA)이 설정되고 확대되고 있는 상황에서 향후 한국 연안 해역이 ECA지역으로 지정된다면 우리나라는 IMO의 규제에 따라 선박의 규제를 강화해야 한다. 이러한 상황과 맞물려 LNG연료 추진선박의 운항이 확대될 것이고, 선박의 대형화 추세를 감안한다면 LNG 벙커링 분야에 선제적으로 대응해야할 필요성이 제기된다. 그리고 LNG 벙커링의 효율성, 활용도, 항만의 환경, 지역민원 등을 고려한다면 부유식(floating type)이 적절할 것이다. 본 연구의 목적은 선행연구를 바탕으로 해상부유식 LNG 벙커링 시스템의 개념에 대해서 살펴보고 해상부유식 LNG 벙커리 시스템의 경제적 타당성을 분석을 통해 확인하는 것이다. 분석을 위해 2013년 "해상부유식 LNG 벙커링 시스템 기술개발 기획연구"에서 제안된 기본 개념 및 기초정보를 바탕으로 "연구개발부문 사업의 예비타당성조서 표준지침 연구(제1판)" 연구보고서의 내용을 참고하여 사업의 타당성 여부를 검토하였다. 분석결과 시장점유율과 R&D기여도에 따라 B/C값이 0.679~2.516인 것으로 나타났다. R&D 기여도가 10.9%일 경우 전체 시장규모에서 해상부유식 LNG 벙커링 시스템이 차지하는 시장점유율이 50% 혹은 60%이면 B/C 값이 각각 0.697 그리고 0.837로 경제성이 낮은 것으로 분석되었다. 사업의 불확실성을 감안하여 민감도 분석(sensitivity analysis)을 실시하였다. 본 분석에서는 비용을 20%까지 10% 단위로 증가하는 경우를 분석하였다. 결과 비용이 각각 10%, 20% 증가할 경우 R&D 기여도가 10.9%인 경우 경제적 타당성을 확보하지 못하는 것으로 분석되었다. 일부 시나리오에서 경제성이 미흡한 것으로 분석되어 사업의 추진과정에서 비용이 증가하지 않게 관리하고 시장점유율 및 R&D 기여도를 정상적인 시나리오 수준으로 유지하는 전략이 필요할 것으로 사료된다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.163-163
• /
• 2018

• 한국해양공학회지
• /
• 제34권2호
• /
• pp.77-88
• /
• 2020

In this study, heading characteristics and heading control performances were evaluated to achieve the wave shield effect. The wave shield effect originating from heading control reduces the relative motions of moored vessels in a floating liquefied natural gas bunkering terminal (FLBT). Therefore, loading and off-loading performances are improved through reduced relative motion. For the objective of this study and efficiency of the analysis, a simplified model was used that assuming no relative motion of the moored vessels in the FLBT. The simplified model involved modeling the environmental loads and inertia of several floating bodies, including FLBT, into the environmental loads and inertia of a single vessel. The simplified model was validated through comparisons with model tests. With the simplified model, heading characteristics and heading control simulations were performed using low-frequency planar motion equations. The heading characteristics and heading control performances of FLBT were analyzed through the results of simulations under the expected environmental conditions. The capacity of the tunnel thrust for the heading control performance was confirmed to be adequate for improvement of the loading and off-loading performances using the wave shielding effects under the operation conditions.

• 무역학회지
• /
• 제45권6호
• /
• pp.99-112
• /
• 2020

It is no exaggeration to say that today's world economy is dependent on international trade, which is the result of inter-state transactions. As the vast majority of international goods transport is transported by international shipping, interest in the seaborne transport field is natural in international and trade studies. In particular, in the case of international shipping, as it is the basis of typical international transportation, changes in international shipping due to the innovation of technology may have an effect on international trade norms. In this study, as a result of evaluating port preference in a hypothetical scenario by using the Design of Experiments method, bunkering as well as port service, which is traditionally important, was identified as a major competitive factor of future ports. It has been revealed that, above all, the port to respond to the future is the continued importance of port services and the supply of ship fuel. Therefore, port authorities are providing implications that LNG bunkering infrastructure suitable for international environmental regulations is important.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권3호
• /
• pp.174-179
• /
• 2016

해양의 환경오염을 줄이기 위하여 LNG 운송선박, 벙커링 선박 및 LNG를 연료로 추진되는 선박의 건조가 증가하고 있다. 이러한 LNG 선박의 저장탱크들은 외부로부터의 열유입으로 증발가스가 지속적으로 발생하고 있으며, 최근 국내 조선사들은 이 BOG를 재액화하여 회수하는 장치를 개발하여 보급하고 있다. 본 연구에서는 부분재액화 처리장치들의 이론적 최대 재액화 수율을 분석하고 재액화 수율에 미치는 영향 인자들을 비교하였다. 해석결과, BOG와 플래시 가스가 보유한 냉열을 열교환으로 간접 이용하는 부분재액화 처리장치는 최대 48.7%가 되었으며, BOG와 플래시 가스가 혼합 합체되어 냉열이 직접 이용되는 부분재액화 처리장치는 최대 41%로 해석되었다. 또한 액체 수율에 크게 영향을 미치는 인자로는 열교환기의 효율로 열교환기의 성능과 단열이 매우 중요한 것임을 알 수 있다.

• 한국산업융합학회 논문집
• /
• 제21권5호
• /
• pp.191-195
• /
• 2018

By using an ANSYS product suite (CFX, Ansys Multiphysics), which is a powerful tool for multiphysics analysis of complicated physical phenomena, we performed a structural stress analysis based on fluid flow and heat transfer phenomena within a quick connect/disconnect (QC/DC) bellows system. Considering the extremely low temperatures in the QC/DC environment, an approach to the problem based on complex multi-physics phenomena, where different phenomena interact with each other, is crucial. Therefore, we use a numerical analysis technique where fluid-thermal-structural interactions are combined. In conclusion, when low temperature fluids flow inside bellows, the expected service life is conspicuously reduced due to the thermal stress caused by heat transfer. Therefore, in future research, a structure with considerably reduced thermal stress by robust design optimization will be derived.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1054-1061
• /
• 2015

The International Maritime Organization (IMO) has been regulating emissions by making mandatory the compliance with institutions aimed at protecting air quality such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and Tier III. Under the circumstances, one of the response measures considered to be the most feasible is the replacement of existing marine fuel with Liquefied Natural Gas (LNG). The industry has been preemptively building infrastructure and developing and spreading engine technology to enable the use of LNG-fueled ships. The IMO, in turn, recently adopted the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels (IGF Code) as an institutional measure. Thus, it is required to comply with regulations on safety-related design and systems focused on response against potential risk for LNG-fueled ships, in which low-flash-point fuel is handled in the engine room. Especially, the Standards of Training, Certification and Watchkeeping (STCW) Convention was amended accordingly. It has adopted the qualification and training requirements for seafarers who are to provide service aboard ships subject to the IGF Code exemplified by LNG-fueled ships. The expansion in the use of LNG-fueled ships and relevant facilities in fact is expected to increase demand for talents. Thus, the time is ripe to develop methods to set up appropriate STCW training courses for seafarers who board ships subject to the IGF Code. In this study, the STCW Convention and existing STCW training courses applied to seafarers offering service aboard ships subject to the IGF Code are reviewed. The results were reflected to propose ways to design new STCW training courses needed for ships subject to the IGF Code and to identify and improve insufficiencies of the STCW Convention in relation to the IGF Code.