• Structural Engineering and Mechanics
• /
• v.12 no.6
• /
• pp.595-614
• /
• 2001

This paper studies the behaviour of a homogeneous cable in a horizontal rigid duct and loaded by an axial compressive force. This behaviour is characterized by spatial buckling modes, named sinusoidal and helical, due to friction and total or partial cable locking. The evaluation of critical buckling loads involved by drilling technology has been studied by many authors. This work presents a new formulation, taking the friction effects into account, for the transmission of the axial load during the postbuckling process. New analytical expressions of pitches in both buckling cases are also given. A life-sized bench is presented, which permits to study the laying of optical fiber cables by squeezing them into an underground duct. Finally, analytical solutions are compared with experimental tests and finite element simulations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.1
• /
• pp.7-11
• /
• 1983

The purpose of this study was to prepare low methoxyl pectins (LMPs) by pectinesterase (PE) using waste tangerine peels and to compare the chemical, physical and gelling properties of the prepared pectins with the commercial LMP. The LMPs were prepared by treating albedo with 0.25M $Na_2CO_3$ to activate the PE. PE was then inactivated by heating. The sample was centrifuged and the supernatant was collected. LMP was obtained as precipitate by adding alcohol to the collected supernatant. The amounts of extractible pectins in albedo were 12.71~12.98% on a dry weight basis. Methoxyl contents of LMPs prepared by treating albedo with PE at pH 7.5 for 10min, at pH 8.5 for 10min, 20min and 30min were 5.12%, 4.27%, 3.08%, 1.85% respectively, demonstrating that the methoxyl contents of the preparations decreased as the degree of treatment albedo with PE increased. The acetyl contents of the preparations ranged from 0.09% to 0.12%, the values of which do not interfere with gel formation. The anhydrouronic acid contents of the prepared pectins were in the range of 94.2%~94.8%. The values of viscosity and molecular weights of the prepared LMPs tent to decrease as the degree of PE action on albedo increased. The textural value of the prepared LMP gels determined by Consistometer, Ridgelimeter and Instron denonstrated that the excess treatment of albedo with PE significantly impaired the gelling properties of the preparations.

• The Plant Pathology Journal
• /
• v.27 no.3
• /
• pp.280-284
• /
• 2011

Fusarium wilt of banana caused by Fusarium oxysporum f. sp. cubense is widespread in Indonesia. However, the distribution of tropical race 4 strains has not been well studied. Thirty nine isolates of F. oxysporum f. sp. cubense were collected from Java and 7 isolates were from Sumatera, Bangka, and Kalimantan. All isolates produced volatile odor when grown on steamed rice. These isolates were further tested for their vegetative compatibility with nitM testers of 20 reported vegetative compatibility groups representing strains that belong to race 1, 2, and 4. Three isolates formed heterokaryons with nitM testers belong to race 1, 11 isolates with race 4, and the rest did not form heterokaryons with all nitM testers used. F. oxysporum f. sp. cubense tropical race 4 specific primer pair was used to amplify a 1400 bp fragment of tropical race 4 DNA. Seven isolates (Bnt2, Mln1, Srg1, Bgl3, Bgl6, Lmp1, and Kjg1) produced the 1400 bp amplification product were therefore tropical race 4.

• Korean Journal of Head & Neck Oncology
• /
• v.16 no.1
• /
• pp.14-19
• /
• 2000

Objectives: Epstein-Barr virus(EBV) is a B-lymphotrophic virus with a tumorigenic potential. EBV infection has been recognized as the main cause of nasopharyngeal carcinoma and Burkitt's lymphoma. Bcl-2 protein expression is known to be up-regulated by the EBV-latency associated antigen latent membrane protein(LMP). The aim of this study was to determine the incidence of EBV in squamous cell carcinomas of the larynx and the relationship between the presence of EBV and bcl-2 expression. Patients and Methods: From January 1994 to December 1977, 35 patients with primary squamous cell carcinoma of the larynx were studied. EBV genome DNA was surveyed by polymerase chain reaction(PCR) assay and then compared the results of in situ hybridization(ISH) for EBER1 using digoxigenin-tailed oligonucleotide probe. The expression of bcl-2 protein was studied by immunohistochemistry(IHC) using bcl-2 monoclonal antibody. Results: By PCR, EBV genome was detected in 22 of 35(62.9%) squamous cell carcinomas of the larynx. Nineteen of 35 cases(54.3%) showed a positive nuclear staining for EBER1 in tumor cells by ISH. Three cases showed positivity in inflammatory cells by ISH and one of them showed a positive staining of both tumor cells and inflammatory cells. Eighteen of 32 specimens(62.5%) were positive for bcl-2 protein. There was no significant correlations between the presence of EBV DNA and bcl-2 expression. Conclusions: It could be concluded that high incidence of EBV in the laryngeal cancer tissue may indicate a probable role of EBV in the development of laryngeal carcinoma.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1485-1489
• /
• 2007

Achaete-scute like 2 (ASCL2) gene encodes a member of the basic helix-loop-helix transcription factor which is essential for the maintenance of proliferating trophoblasts during placental development. ASCL2 gene preferentially expresses the maternal allele in the mouse. However, it escapes genomic imprinting in the human. In this study, the complete open reading frame consisting of 193 amino acids of ASCL2 gene was obtained. Sequence analysis indicated that a C-G mutation existed in the 3' region between Meishan and Large White pigs. The polymorphism was used to determine the monoallelic or biallelic expression with RT-PCR-RFLP in pigs of Large $White{\times}Meishan$ $F_1$ hybrids. Imprinting analysis indicated that the ASCL2 gene expression was biallelic in all the tested tissues (heart, liver, spleen, lung, kidney, stomach, small intestine, skeletal muscle, fat, uterus, ovary and pituitary). PCR-RFLP was used to detect the polymorphism in 270 pigs of the "$Large\;White{\times}Meishan$" $F_2$ resource population. The statistical results showed highly significant associations of the genotypes and fat meat percentage (FMP), lean meat percentage (LMP) and ratio of lean to fat (RLF) (p<0.01), and significant associations of the genotypes and loin eye area (LEA) and internal fat rate (IFR) (p<0.05).

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.300-312
• /
• 1993

The material deterioration of service-exposed boiler tube steels in fossil power plant was evaluated by using the electrochemical technique namely, modified electrochemical potentiokinetic reactivation(EPR). It was focused that the passivation of Mo$_{6}$C carbide which governs the mechanical properties of Mo alloyed steels did not occur even in the passivity region of steel in sodium molybdate solution and the reactivation peak current (Ip) observed as the result of non-passivation indicating the precipitation of Mo$_{6}$C carbides. To obtain the optimal test conditions for the field test by using the specially designed electrochemical cell, the effects of scan rate, the surface roughness and the pH of electrolyte on Ip value were also investigated. Furthermore, the change of mechanical properties occurred during the long time exposure at high temperature was evlauated quantitatively by small punch(SP) tests and micro hardness test taking account of the metallurgical changes. It is known that reactivation peak current (Ip) has a good relationship with Larson-Miller Parameter(LMP) which represents the information about material deterioration occurred at high temperature environment. In addition it was possible to estimate the ductile-brittle transition temperature (DBTT) by means of the SP test. The Sp test could be, therefore, suggested as a reliable test method for evaluating the material degradation of boiler tube steels. From the good correaltion between the SP DBTT and Ip values shown in this study, it was knows that the change of mechanical properties could be evaluated non-destructively by measurring only Ip values.ues.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.5
• /
• pp.1372-1381
• /
• 1996

As recieved boiler tuve steel was aged artificially at $650^{\circ}C$ and$690^{\circ}C$ for various time duration to simulate the material deterioration which could be occurred during the operation of fossiol power plants. And the tensile tests, the microhardness tests and the characterization of carbides formed in the aging process were performed to asses the relationship between the mechanical properties and the effect of thermal aging. Furthernore, the amout of Mo-rich carbide were investigated by ondestructive method by noticing the fact that formation of Mo-rich carbide were investigated by ondestructive melthod by noticing the fact that formation of Mo-rich carbides($Mo_6C$) which stabilizes lastly affects the mechanical properties. It was known that the microhardness results of service exposed materials were similar to the ones which are aged at $650^{\circ}C$. The room temperature measurement showed small variation in the yield points and ultimate strength in materials aged at $650^{\circ}C$. Those properties at $540^{\circ}C$ showed the abrupt decrease compared with as received material even if short aging time. And it was found that $650^{\circ}C$ $690^{\circ}C$ aging cause different effects on mechanical properties, although the temperature time parameters(LMP;Larson-Miller parameter) are same. And it was concluded that the aigng at $650^{\circ}C$ is more appropriate to simulate the service exposed condition. Finally, the relationship between high temperature tensile properties and Ip values were established, which offers a potential way of reliability tests onthe power plant components.

• Journal of Nutrition and Health
• /
• v.32 no.8
• /
• pp.877-886
• /
• 1999

To assess the effect of an antenatal nutritional status on pregnancy outcome, especially neonatal birty weight, one-day 24hr-recall and two-day recording methods for dietary survey and interview for general and obstetric characteristics of each subject were completed and pregnancy outcome was recorded by phone after delivery. 147 pregnant women attending routinely public health centers in Ulsan were divided into 1st trimester(n=36), 2nd trimester(n=102), 3rd trimester(n=71) by LMP(Last Menstrual Period) because some subjects attended repeatedly in different trimester. The subjects were aged 27.9$\pm$2.9 as mean and the level of education was senior high school and more. 20.4% of subjects experienced spontaneous abortion and 30.0% experienced induced abortion in previous pregnancy. Mean intakes of all nutrients except ascorbic acid were significantly different but dietary composition of energy intakes was not different between trimester. Mineral of calcium, iron and zinc did not meet the RDA for pregnancy outcome was about 20%, which consists of spontaneous abortion (3.4%), caesarian section(15.6%), premature delivery(0.7%) and still births(0.7%). The mean birth weight of neonates is 3.31kg the rate of neonatal birth weight below 10th percentile was 8.4% and the rate of low birth weight(<2.5kg) was 3.1%. By analysis of nutrient factors that influence on the neonatal birth weight (NBW), iron intake correlated negatively and zinc intake correlated positively with NBW in 1st trimester but fat and iron intakes correlated with NBW positively in 3rd trimester. Prepregnancy weight, gestational age at delivery and No. of induced abortion had a positive effects on NBW and No. of spontaneous abortion and te severity of morning sickness had a negative effects on NBW.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1143-1148
• /
• 2010

We investigated the separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction comprising four kinds of NHC [indole (In), quinoline (Q), iso-quinoline (iQ), quinaldine (Qu)], three kinds of bicyclic aromatic compound (BAC) [1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN) mixture with ten structural isomers (DMNs; regarded as one component)], biphenyl (Bp) and phenyl ether (Pe) by liquid membrane permeation (LMP). A batch-stirred tank was used as the permeation unit. An aqueous solution of saponin and n-hexane were used as the liquid membrane and the outer oil phase, respectively. Yield and selectivity of individual NHC was much larger than that of BAC, Bp and Pe. Increasing the initial mass fraction of the saponin to the membrane solution ($C_{sap,0}$) and the initial volume fraction of O/W emulsion to total liquid in a stirred tank (${\phi}_{OW,0}$) resulted in deteriorating the yield of individual NHC, but increasing the stirring speed (N) resulted in improving the yield of each NHC. With increasing $C_{sap,0}$, the selectivity of each NHC based on DMNs increased. Increasing ${\phi}_{OW,0}$ and N resulted in decreasing the selectivity of individual NHC based on DMNs. At an experimental condition fixed, the sequence of the yield and selectivity in reference to DMNs for each NHC was Q > Qu = iQ > In. Furthermore, we compared LPM method with methanol extraction method in view of the separation efficiency (yield, selectivity) of NHC.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.181-186
• /
• 2013

We present nondestructive characterization for remanent life of advanced ferritic steels, next-gen energy facility materials by reversible permeability. The reversible permeability is based on the theory that the value of reversible permeability is the same differential of the hysteresis loop. The measurement principle is based on the foundation of harmonics voltage induced in a sensing coil using a lock-in amplifier tuned to the frequency of the exciting one. The peak interval of reversible permeability(PIRP), Vickers hardness, and tensile strength(TS) of the aged samples decreased with aging time. We could estimate the remanent life of advanced ferritic steel by using the relationship between the peak interval of reversible permeability and Larson-Miller parameter(LMP), non-destructively.