• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.135-144
• /
• 2013

Ventilation efficiency has an important role in agricultural facilities such as greenhouse and livestock house to keep internally optimum environmental condition. Age-of-air concept allows to assess the ventilation efficiency of an agricultural facility according to estimating the ability of fresh air supply and contaminants emission using LMA and LMR. Most of these methods use a tracer gas method which has some limitations in experiment like dealing unstable and invisible gas. Therefore, the aim of this study was to develop a straightforward method to calculate age-of-air values with CFD simulation which has the advantage of saving computational time and resources and these method can solve the limitations in experiment using tracer gas method. The main idea of LMA computation is to solve the passive scalar transport equation with the assumption that the production of the time scalar throughout the room is uniform. In case of LMR calculation, the transport of the time scalar was reversed compulsively using UDF. The methodology to validate the results of this study was established by comparing with preceding research that had performed a computing LMA and LMR value by laboratory experiments and CFD simulations using tracer gas. As a result, the error was presented similarly level of results of preceding research. Some big errors could be caused by stagnated area and incongruity turbulence model. while the computational time was reduced to almost one fourth of that by preceding research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1117-1124
• /
• 2010

PMIPv6 is a network-based mobility support scheme, proposed and standardized by NetLMM WG of IETF. It is proposed to solve problems of conventional mobility schemes, and to improve inefficiency of those. The standard document describes network components and detailed procedures to provide mobility to MN. But it describes only a handover procedure between MAGs, not between LMAs. In order to support seamless connectivity of MN efficiently, a handover procedure between LMAs is necessary. The proposed scheme in this paper utilizes a route optimization procedure to prevent inefficiency of inter-LMA tunneling scheme. At the same time, the proposed scheme utilizes a pre-authentication scheme to reduce handover latency. According to the result of performance evaluations, the proposed scheme greatly reduces handover latency, compared to conventional mobility support schemes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.4
• /
• pp.591-595
• /
• 2002

Three hundred thirty five progeny testing steers of Korean beef cattle were evaluated ultrasonically for back fat thickness (BFT), longissimus muscle area (LMA) and intramuscular fat (IF) before slaughter. Class measurements associated with the Korean yield grade and quality grade were also obtained. Residual standard deviation between ultrasonic estimates and carcass measurements of BFT, LMA were 1.49 mm and $0.96cm^2$. The linear correlation coefficients (p<0.01) between ultrasonic estimates and carcass measurements of BFT, LMA and IF were 0.75, 0.57 and 0.67, respectively. Results for improving predictions of yield grade by four methods-the Korean yield grade index equation, fat depth alone, regression and decision tree methods were 75.4%, 79.6%, 64.3% and 81.4%, respectively. We conclude that the decision tree method can easily predict yield grade and is also useful for increasing prediction accuracy rate.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.193-194
• /
• 2007

본 연구는 Laban이 제시한 모션 분석 기법을 이용하여 모션의 긴장도를 측정하는 방법을 제안한다. 이러한 긴장도값을 이용하면 캐릭터 모션과 배경음악간의 자동적 동기화를 위한 기준값으로 사용할 수 있다. Laban의 모션 분석 기법. 즉 LMA는 모션을 Effort라고 명명된 4개의 시공간적 요소로 나누고 각 4개의 Effort마다 2가지 상반된 기준을 제시함으로써 모션을 분석하도록 하였다. 이러한 기준을 양적으로 측정하기 위해 우리는 운동학, 역학에 기초한 수식을 제안하고 이를 통해서 계산된 실제 긴장도 값을 실험데이터에 근거하여 조정하였다. 실험을 통해 제안한 긴장도 측정 결과는 어느 정도 사람의 반응과 비슷한 정도의 순위 판별 능력을 보였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1206-1209
• /
• 2009

모바일 단말의 이동성을 지원하는 호스트 기반의 MIPv6, HMIPv6 및 FMIPv6 프로토콜이 개발되었지만, 이동성 기능을 단말기에 구현해야 하는 부담이 있다. 이러한 문제점을 해결하기 위해 최근에 네트워크 기반으로 동작하는 PMIPv6 프로토콜이 등장하였다. 그러나 라우팅 최적화나 핸드오버 지연시간을 단축해야 하는 과제가 아직 남아 있다. 따라서, 본 논문에서는 사용자의 인증절차를 간소화하여 지연시간을 줄이고, 핸드오버 시간 동안 패킷들을 LMA 의 별도 광 버퍼링 공간에 저장하였다가 재전송함으로써 패킷 disordering 문제점을 해결하는 기법을 제안한다. 성능평가는 분석 모델을 통해 평가하며, 제안기법의 핸드오버 지연시간은 표준 PMIPv6 대비 33% 개선된 성능을 보인다.

• Journal of Acupuncture Research
• /
• v.19 no.2
• /
• pp.114-127
• /
• 2002

Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion objectively and to be used as the quantitative data for developing the new thermal stimulating treatment by observing the combustion time and temperature of commercial moxaes. Methods : We have selected two types(large-size moxa A(LMA), large-size moxa B (LMB)) among large moxaes used widely in the clinic. We examined combustion times, temperatures in each period during a combustion of moxa. Results : 1. The combustion time in the preheating period was about 30sec in both moxaes on the non-contact heated surface. 2. The combustion time in the heating period was about 345sec in LMA and about 1391 sec in LMB, about 4 times longer in LMB on the non-contact surface. 3. The maximum temperature in the heating period was $44.5^{\circ}C$ in LMA and $45.4^{\circ}C$ in LMB respectively, higher by $0.9^{\circ}C$ in LMB. The average temperature in the heating period was $35.5{\sim}37.6^{\circ}C$ in LMA and $36.0{\sim}39.8^{\circ}C$ in LMB, a little higher in LMB. 4. The combustion time in the retaining period in LMA was 45.4sec and 13% of that in the heating period, and in LMB 594.7sec and 43% of that in the heating period on the non-contact surface. 5. On the point(PH) measured maximum temperature, the average temperature during the retaining period was $44.0^{\circ}C$, $42.9^{\circ}C$ respectively and the temperature at an end of the retaining period was $43.0^{\circ}C$, $40.2^{\circ}C$ respectively. 6. The time at a beginning of the cooling period was about 418 sec from ignition in LMA and 2021sec in LMB, and the temperature at that time was $36.9{\sim}39.1^{\circ}C$ on the non-contact surface. Conclusion : It was thought that not only the figure of moxicombustion device, but also the form and size of moxa had influence on the combustion characteristics deciding the performance of stimulus seriously.

• Journal of the Korean Statistical Society
• /
• v.22 no.2
• /
• pp.259-269
• /
• 1993

A moving average model, LMA(q) and an autoregressive-moving average model, NLARMA(p, q), with Laplacian marginal distribution are constructed and their properties are discussed; Their autocorrelation structures are completely analogus to those of Gaussian process and they are partially time reversible in the third order moments. Finally, we study the mixing property of NLARMA process.

• Korean Journal of Optics and Photonics
• /
• v.21 no.5
• /
• pp.200-205
• /
• 2010

We report temperature and strain sensing characteristics of two kinds of in-line fiber interferometers. One interferometer consists of a section of Hollow Optical Fiber(HOF) spliced between two Photonic Bandgap Fibers(PBGF) and the other is built by splicing a section of HOF between two Large Mode Area-Photonic Crystal Fibers(LMA-PCF). To minimize the splice losses, we carefully optimized the heating time and arc current of the splicer so as not to collapse the air holes of the fiber. It is found that the first interferometer has a temperature sensitivity of 15.4 pm/$^{\circ}C$ and a strain sensitivity of 0.24 pm/${\mu}\varepsilon$. The other interferometer exhibits a temperature sensitivity of 17.4 pm/$^{\circ}C$ and a strain sensitivity of 0.2 pm/${\mu}\varepsilon$.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.8
• /
• pp.407-415
• /
• 2008

This paper presents novel segmentation and transition techniques for dancing motion synthesis. The segmentation method for dancing motions is based on Laban Movement Analysis (LMA). We assume a dance sequence as a set of small dancing motions. To segment a dancing motion is a subjective, psychological, and complex problem, so we extract the shape factor of LMA from a dance motion and observe shape's changes to find the boundaries of dance segments. We also introduce a transition method that meets constraints on the feet. This method that is based on a linear interpolation modifies the intermediate posture motion after analyzing footprint positions. The posture could be a key-frame between source motion and target motion on the transition. With the proposed techniques, it would be easy for multimedia applications to generate plausible dance motions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.1999-2007
• /
• 2010

Proxy Mobile IPv6(PMIPv6) is a network-based mobility management protocol and it does not require mobile node's involving in mobility management. In PMIPv6, the Mobile Access Gateway (MAG) incurs a high signaling cost to update the location of a mobile node to the remote Local Mobility Anchor (LMA) if it moves frequently. It may cause excessive signaling traffic and increase a high traffic load on LMA. Therefore, we propose a new mobility management scheme in proxy mobile IPv6 networks with dynamic paging support. To minimize signaling overhead, in our proposal, the size of the paging area is determined dynamically according the changes of mobility and traffic patterns of the mobile node. An analytic model is applied to determine the optimal size of the paging area. The cost analysis using fluid flow model presented in this paper shows that our proposal can achieve performance superior that of PMIPv6 scheme.