• 제목/요약/키워드: LIPCA(Lightweight Piezoceramic Composite Actuator

검색결과 5건 처리시간 0.018초

압전 복합재료 작동기 LIPCA를 이용한 보의 진동 제어 (Vibration Control of Beam using Piezoceramic Composite Actuator LIPCA)

  • 아리프수하리요노;구남서;박훈철;윤광준
    • 한국군사과학기술학회지
    • /
    • 제8권4호
    • /
    • pp.130-135
    • /
    • 2005
  • This paper presents application possibility of Lightweight Piezoceramic Composite Actuator(LIPCA) to suppress vibration of dynamic structures as an actuator. LIPCA is composed of a piezoelectric layer, a carbon/epoxy layer and glass/epoxy layers. When compared to the bare piezoelectric ceramic(PZT), LIPCA has advantages such as high performance, durability and reliability. In this study, performances of LIPCA have been estimated in an active vibration control system. Experiments were performed on an aluminum beam with cantilever configuration. In this test, strain gages and single LIPCA are attached on the aluminum beam with epoxy resin. Digital ON-OFF control algorithm is applied into the system to exhibit performance of LIPCA as actuator in active vibration control system. First, we performed static actuation test of bare PZT and LIPCA in order to show the superiority of LIPCA. Secondly, we carried out beam vibration control test using LIPCA. The results showed LIPCA could suppress free vibration of the aluminum beam, which means that LIPCA can be applied as an actuator to control vibration of dynamic structures.

압전작동기 LIPCA로 구동하는 곤충 모방 날갯짓 기구 (Insect-mimicking Flapping Device Actuated by a Piezoceramic Actuator LIPCA)

  • 박훈철;모 사이푸딘;윤광준;구남서
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.719-722
    • /
    • 2005
  • In this paper, we present out recent progress in the LIPCA (Lightweight Piezo-Composite Actuator) application for actuation of a flapping wing device. The flapping device uses linkage system that can amplify the actuation displacement of LIPCA. The feathering mechanism is also designed and implemented such that the wing can rotate during flapping. The natural flapping-frequency of the device was about 9 Hz, where the maximum flapping angle was achieved. The flapping test under 5 Hz to 15 Hz flapping frequency was performed to investigate the flapping performance by measuring the produced lift and thrust. Maximum lift and thrust were produced when the flapping device was actuated at about the natural flapping-frequency.

  • PDF

압전 작동기 LIPCA를 이용한 형상가변익 설계 및 작동구현 (Design and Demonstration of Morphing Wing Sections Using Lightweight Piezoceramic Composite Actuator (LIPCA))

  • 임상민;이상기;박훈철;윤광준;구남서
    • 한국항공우주학회지
    • /
    • 제31권10호
    • /
    • pp.34-39
    • /
    • 2003
  • 본 논문에서는 압전작동기 LIPCA를 이용하여 형상가변익을 제작하였고, 제작된 형상가변익의 작동변위에 관하여 연구를 수행하였다. 등가 열 모델링 방법과 MSC/NASTRAN으로 해석을 수행하여 압전작동기의 작동변위를 예측하였고, 이를 바탕으로 형상가변익의 설계와 제작을 수행하였다. 실험을 통해 제작된 형상가변익의 실제 작동변위는 압전세라믹의 재료 비선형성으로 인해 예측된 값보다 크게 나옴을 확인하였다. 압전작동기 LIPCA를 이용한 형상가변익은 작은 크기의 무인비행기나 초소형비행기의 조종면으로 사용될 수 있다.

LIPCA 작동기로 구동되는 날갯짓 기구의 설계 및 성능평가 (Design and evaluation of LIPCA-actuated flapping device)

  • 이승식;모 시아푸딘;박훈철;윤광준;구남서
    • 한국항공우주학회지
    • /
    • 제33권12호
    • /
    • pp.48-53
    • /
    • 2005
  • 본 논문에서 LIPCA(Lightweight Piezoceramic Composite Actuator)를 이용한 날갯짓(flapping) 기구의 개발에 관한 최근의 연구진척 사항을 제시하였다. 날갯짓 기구는 여러 개의 연결막대를 이용하여 LIPCA의 제한된 작동변위를 커다란 날갯짓 각(flapping angle)이 발생하도록 증폭시켰으며, 패더링 메커니즘(feathering mechanism)을 적용하여 날갯짓과 동시에 날개에 비틀림이 발생하도록 설계되었다. 이 날갯짓 기구의 고유 날갯짓 주파수는 약 9Hz로, 이때 최대의 날갯짓 각이 발생하였다. 제작된 날갯짓 기구의 작동성능을 평가하기 위하여 날갯짓 주파수를 4Hz에서 15Hz까지 변화시키면서 발생되는 양력과 추력을 측정하였으며, 최대 양력과 최대 추력은 고유 날갯짓 주파수 부근에서 계측되었다.

인공근육형 LIPCA를 이용한 물고기 모방 로봇의 설계, 제작 및 실험 (Mechanical Design Fabrication and Test of a Biomimetic Fish Robot Using LIPCA as an Artificial Muscle)

  • 허석;테디 위구나;구남서;박훈철
    • 대한기계학회논문집A
    • /
    • 제31권1호
    • /
    • pp.36-42
    • /
    • 2007
  • This paper presents mechanical design, fabrication and test of a biomimetic fish robot actuated by a unimorph piezoceramic actuator, LIPCA(Lightweight Piezo-Composite curved Actuator.) We have designed a linkage mechanism that can convert bending motion of the LIPCA into the caudal fin movement. This linkage system consists of a rack-pinion system and four-bar linkage. Four types of artificial caudal fins that resemble caudal fin shapes of ostraciiform subcarangiform, carangiform, and thunniform fish, respectively, are attached to the posterior part of the robotic fish. The swimming test under 300 $V_{pp}$ input with 0.6 Hz to 1.2 Hz frequency was conducted to investigate effect of tail beat frequency and shape of caudal fin on the swimming speed of the robotic fish. At the frequency of 0.9 Hz, the maximum swimming speeds of 1.632 cm/s, 1.776 cm/s, 1.612 cm/s and 1.51 cm/s were reached for fish robots with ostraciiform, subcarangiform carangiform and thunniform caudal fins, respectively. The Strouhal number, which means the ratio between unsteady force and inertia force, or a measure of thrust efficiency, was calculated in order to examine thrust performance of the present biomimetic fish robot. The calculated Strouhal numbers show that the present robotic fish does not fall into the performance range of a fast swimming robot.